• Journal of the Society of Disaster Information
• /
• v.16 no.3
• /
• pp.421-429
• /
• 2020

Purpose: The purpose of this study is to present step-by-step countermeasures to prevent fires in sandwich panel warehouses and to enhance on-site fire response capabilities. Method: Interviews of firefighters related to fire sites, advice from fire experts, and experiments on protection performance were conducted to draw up measures for each element to strengthen on-site response capabilities. Result: The fire safety management checklist for warehouse fire safety managers and the installation standards for wall protection of sandwich panel warehouses are presented. In addition, Standard Operational Procedures(SOP) for fire application of sandwich panel warehouses were established for firefighters on-site. Conclusion: Through this study, step-by-step fire safety measures were established for preventing, protecting and suppressing fires in sandwich panel warehouses.

• Fire Science and Engineering
• /
• v.30 no.2
• /
• pp.98-105
• /
• 2016

A fire risk assessment in rack-type warehouse is typically determined based on the following factors: 1. flammability and fire loads for storage of goods, packing materials, and pallet, 2. a ceiling height of warehouse indoor spaces, and 3. height, arrangement, and spacing for storage racks. For appropriately extinguishing and protecting the fire in warehouses, therefore, it is necessary to classify combustibles considering the previously mentioned factors and to develop design Standards for sprinkler system. As the first step to apply automatic sprinkler system to domestic warehouses, this study investigated characteristics for commodity distribution and warehouse configuration using 28 warehouses in five distribution complexes located in Gyeonggi-do, South Korea. In addition, this study analyzed Standards for commodity distribution adopted in USA, Europe, and Japan. Using the field survey analysis, this study was aimed to provide baseline data to prepare for Commodity Classification Standard for warehouses in South Korea.

• Journal of Conservation Science
• /
• v.34 no.1
• /
• pp.31-37
• /
• 2018

It was estimated that wooden warehouses excavated from Bongseon-ri site in Seocheon were built around the 5th century according to the soil layers and construction methods of earthen structures. In order to identify the exact date, three wooden materials (BSMG 01, 06, and 12) from wooden warehouses were analyzed through radiocarbon dating using wiggle match. The outermost ring of BSMG 01 produced a radiocarbon date (95.4% confidence interval) of AD 431~551, BSMG 06 produced a date of AD 460~570, and BSMG 12 produced dates of either AD 240~430 or AD 490~510. The common age of the three wooden materials was identified as AD 490-510 and coincided with the original estimated archaeological age. Therefore, this study proved the accuracy of radiocarbon dating using wiggle match.

• Journal of the Korea Society for Simulation
• /
• v.22 no.4
• /
• pp.119-128
• /
• 2013

We need to consider a number of technical constraints to build new warehouses. In particular, it is essential to assure that the flow of trucks is smooth and seamless even in large size warehouses. The flow of trucks in warehouses are subject to, for instance, the routes of trucks, the frequency and the time stamps of their in-and-out's. Also, the routes of trucks interfere each other. Thus, finding good flow of trucks in a warehouse is a tough task when all interferences among trucks are considered. In this paper, we find some layouts of the routes of trucks exhibiting good performance based on simulation. we use ARENA ver. 11 for simulation.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.219-230
• /
• 2015

It is difficult to make plans about the production schedule and volume of seasonal products due to the huge uncertainty in the prediction of their demands, which is why the amounts of carryover seasonal products increase after the peak season. Traditional models fail to meet the important requirements of production and stock plans related to the enhanced efficiency of logistics system due to the reduced value of carryover products by the disposal based on large discounts and deterioration, which poses considerable difficulties with actual problem solving. This study examined the stages of product storage from the specialized factory warehouses during a low season through the stores and the warehouses of local distribution centers during a high season to stock disposal and carryover product warehouses after a high season. The study developed a model for logistics rationalization plans to minimize carryover products by advance selling new products by subscription during a low season in anticipation of high season demands, increasing the accuracy of demands prediction, and making stable production plans, as well as demonstrated its excellence through numerical analysis.

• Fire Science and Engineering
• /
• v.33 no.3
• /
• pp.44-50
• /
• 2019

In rack-type warehouses, it is difficult to extinguish fires effectively using sprinkler systems because high fire load commodities are stacked vertically and densely. In this study, an actual size rack structure was constructed and the effectiveness of the fire extinguished by the sprinkler system was confirmed through fire tests according to the type and arrangement of the sprinkler head in the rack structure. Through this study, to effectively suppress fires in rack-type warehouses, it is necessary to use sprinkler heads with a volume of more than 115 LPM and sprinkler heads need to be installed at the diagonal corner positions of the commodities of each rack.

• Journal of the Korean Society of Tobacco Science
• /
• v.15 no.2
• /
• pp.167-173
• /
• 1993

Pirimiphos - methyl was fogged in a tobacco warehouse to determine the proper dose rate, Small wire cages, containing adults and larvae of cigarette beetle (Lasiodema senicorne F.) were put at different altitude in the warehouse of which the holding capacity was about 250m3. At recommended dose rate, 0.4ml/m3(25% ai), it brought about 100% mortality of adults and 98.8% -100% mortality of larvae. When the dose rate was reduced to about half the recommended one, 97.6 and 96.4% mortality could still be obtained against adults and larvae, respectively. The number of the beetles monitored by sex - pheromone trap was greatly reduced after the fogging in the warehouses at 4 geographic places in Korea. When the warehouses were ventilated for one hour immediately after the fogging done for 48 hours, workers could not detected any opposing smell in the warehouses. And panel members responded positively that there was no negative effect on the taste of the cigarettes made of the fogged tobacco. Although the residue of the chemical was detected from the cigarettes in 4 of 5 cases, the residue was 1.1-1.3$\mu\textrm{g}$/20 cigarettes except for one case from which 3.3$\mu\textrm{g}$/20 cigarettes residue was detected. The relatively low residue is about l/450-1/150 of the WHO/FAO tolerant level.

• Journal of Information Technology Applications and Management
• /
• v.18 no.1
• /
• pp.125-141
• /
• 2011

As the sales volume of online shops increases, the job burden in the back-offices of the online shops also increases. Order picking is the most labor-intensive operation among the jobs in a back-office and mid-size pure click online shops are experiencing the time delay and complexity in order picking nowadays while fulfilling their customers' orders. Those warehouses of the mid-size shops are based on manual systems, and as order pickings are repeated, the warehouses get a mess and lots of products in those warehouses are getting missing, which results in severe delay in order picking. To overcome this kind of problem in online clothing shops, we research a methodology to locate warehousing products. When products arrive at a warehouse, they are packed into a box and located on a rack in the warehouse. At this point, the operator should determine the box to be put in and the location on the rack for the box to be put on. This problem could be formulated as an Integer Programming model, but the branch-and bound algorithm to solve the IP model requires enormous computation, and sometimes it is even impossible to get a solution in a proper time. So, we relaxed the problem, developed a set of heuristics as a methodology to get a semi-optimum in an acceptable time, and proved by an experiment that the solutions by our methodology are satisfactory and acceptable by field managers.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.401-412
• /
• 2020

This study analyzed the causes of warehouse fires using a creative problem-solving technique called TRIZ. It identified preventive measures by applying 4M. The results are as follows. First, this study examined the inconsistency among the causes of warehouse fires using TRIZ. Second, it analyzed human factors and fire prevention measures in warehouses such as safety standards for managers, and methods for the promotion of safety consciousness among workers, and for the reinforcement of construction technology for sandwich panel workers. Third, it identified the mechanical and facility factors and fire prevention measures in warehouses such as safety facilities, the expanded installation of safety devices, the adoption and development of fire suppression equipment, and the deployment of methods to improve the fire resistance of sandwich panels. Fourth, it presented working and environmental factors and fire prevention measures in warehouses such as the tightening of safety precautions and the supervision of working methods, and setting fire partitions both in loading places and based on performance-based design. Finally, it proposed managerial factors and fire prevention measures in warehouses such as specific targeting for firefighting with low fire hazards, reviewing the material quality regulations of non-combustible or higher for sandwich panels in the specific target of firefighting that cannot apply fire safety standards, installing sprinklers in cold storage, and mandating the installation of automated facilities with retroactive application regardless of the floor area in the warehouse with a sandwich panel structure.

• Journal of Korean Institute of Industrial Engineers
• /
• v.12 no.1
• /
• pp.73-80
• /
• 1986

This paper deals with the problem of the optimal location of warehouses in the two stage distribution system, i.e., the distribution system where the product is transported from plants to customer areas via warehouses. The Problem is formulated with a zero-one mixed integer programming and an efficient branch and bound algorithm is then used to solve the problem. In order to obtain the solution of this problem, this paper shows the procedure of conversion of two stage distribution system into one stage distribution system. An improved method of solving the linear programming at the nodes and branching decision rule is also showed by this study.