• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.12
• /
• pp.1373-1380
• /
• 2015

The rapid spread and various design of solar power plants, development, construction, maintenance technology and business coexist variety and price decline and the recent solar power plants built since the early 2010 despite the decline in the power generation unit main equipment Construction of power plants to stabilize the technology has been continuously promoted. Recently, built in the form of a solar power plant to the construction and leasing the roof and upper structure to replace the limited ground space is increasing. Factory roof, studies such as warehouse and logistics center leased space in the roof installed solar plant status and skills, conducted a study to review and analyze the economy.

• Annual Conference of KIPS
• /
• 2015.10a
• /
• pp.1110-1112
• /
• 2015

에너지 절감을 위해 다양한 분야에서 노력을 기울이고 있지만 전체 에너지 사용량의 약 20% 이상을 차지하는 건물 분야는 정부의 정책과 제도적인 지원 하에 에너지 절감활동을 활발하게 진행하고 있다. 특히 $3000m^2$ 이상의 중대형 건물의 경우 BEMS(Building Energy Management System)기반의 건물에너지 관리가 의무화 될 예정이다. 하지만 기존 BEMS의 경우 특정 기업에 의한 단독 솔루션 형태로 제공되고 있어 BEMS간 데이터 상호호환성을 보장하지 않고, 단순 모니터링 기능에 의존하여 저장/관리 되지 않고 버려지는 데이터들이 많아 차후 문제가 발생한 경우 과거 데이터를 통한 분석 작업에 어려움이 있다. 따라서 본 논문에서는 건물에너지 통합관리 측면에서 원격지에 설치된 다양한 BEMS들의 센서/미터 데이터들을 웹을 통해 수집하고 데이터 웨어하우스에 저장/관리되며 건물에너지 통계, 분석 및 진단을 가능하도록 하는 데이터 웨어하우스 기반의 원격 건물에너지 통합 관리 시스템 설계에 대해 서술한다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.7
• /
• pp.417-423
• /
• 2009

Air curtains are widely used for gates of shopping mall, warehouse, cold stores and refrigerated display cabinets. The purpose of the air curtain is to reduce the infiltration of outdoor air and heat loss from the air conditioning space to ambient air. Design data for the air curtain given by previous researchers do not mention the influence of wind speed. Thus, this paper presents a performance of single jet air curtain in heating space when the wind blows toward the opening space of the building. A numerical simulation is used to study the influence of various parameters on the efficiency of the downward-blowing air curtain device which is installed inside of the wall above the door. The performance of the air curtain is evaluated by sealing efficiency which provides the assessment of the energy savings. A new safety factor is also proposed for determination of air curtain jet velocity under the various wind conditions.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.4
• /
• pp.95-104
• /
• 2023

The purpose of this study is to propose measures to increase evacuation safety by calculating the habitable time using a fire and evacuation simulation program for the Room-escape cafe currently in operation, and comparing and analyzing it with the evacuation required time. Assuming a fire due to overheating of electric heaters in use in front of the warehouse, the habitable time was calculated through fire simulation, and the occupant's evacuation time calculated through evacuation simulation according installation of safety facilities, etc. was compared and analyzed with the habitable time. In the case of escape room cafes with safety facilities installed, evacuation safety was satisfied, but in escape room cafes without safety facilities, the evacuation safety was not secure. As a result of analyzing evacuation safety for each scenario based on the ASET analyzed in the fire simulation, it was found that in scenario 1, evacuation safety was secured and everyone successfully evacuated, while in scenario 2, no one succeeded in evacuation. These results can be said to confirm that the installation of safety facilities is very important in business establishments such as escape room cafes, which become enclosed structures when games are started.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.341-346
• /
• 2013

Refrigerated warehouse inventory management program which manages the logistics of shipping&receiving and inventory quickly and accurately is a costly and labor-intensive maintenance because it is operated in the legacy system on a closed client-server environment. There are no services available for consignees who are the consumers of refrigerated warehouses except fax or phone for orders which makes the business process inefficient and creates many problems such as error and inaccuracy. In this paper, we design and implement a mobile framework with a legacy system supporting various services to the consignees for solving problems of outdated legacy systems and no services to use. The system supports promptness and accuracy which give the users improved satisfaction by providing orders and queries of inventory for the consignees on mobile devices.

• Journal of Korean Society of Rural Planning
• /
• v.11 no.4 s.29
• /
• pp.75-91
• /
• 2005

This study designs an integrated data architecture to systematically manage the agricultural statistics database. Managing the agricultural statistics is important since it provides data for policies and decision making for agribusinesses. Ministry of Agriculture and the National Statistical Office collect the basic agricultural statistic data which provides the basis of logical decision making and agricultural policies. However, the agricultural statistic data has not well been used. The data has not been consistently collected nor managed. The raw data has not been organized nor processed to meet various demands. The needs has been arisen for a consistent agricultural statistics system to increase the relevance, accessibility, and efficiency of data for various users. There are massive amount of data accumulated over a long time period. Introducing the new system and reorganizing the data will bear large risks. A systematic method is required to reduce the risks in planing, building, and maintaining the database without hindering administration. This study provides a design of the agricultural statistics system architecture based on the user requirement analysis (URA) and similar systems abroad. We have also build a prototype to check the implementability of the system design.

• Journal of Society of Preventive Korean Medicine
• /
• v.13 no.3
• /
• pp.19-28
• /
• 2009

Background : Recently, Medical Act was amended to encourage the induction of combined treatment between Oriental Medicine doctors and Western doctors. As yet, the information infra for combined treatment has not been studied. Objectives : This study aimed to design the architecture of information system for combined treatment of the Oriental and the Western Medicine. Methods : First, we defined the information of combined treatment through the analysis of research trends from the inside and outside of the country. Because the data compatibility is very important, the definition of information must be ahead of anything else. Second, we designed the architecture of information system based on the prior definition. Results : We classified the information for combined treatment by subject such as law, clinic, research, manpower, facilities, and education. In this paper information system examined in three aspects. First the infra layer is organized as hardware, netware, and security. Second is data warehouse layer for the storing, filtering, and extraction of data. Third is service layer which is related to data transmission. And Finally all information for combined treatment is provided through the portal system for medical consumer, political planner, and R&D researcher. Conclusion : In this paper, we studied the essential factors of combined treatment information in the view point of information system. But the detailed design and implementation of information system must be followed to effect this results.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.48-54
• /
• 2018

With the 4th industry era, smart factories are emerging. In the era of multi-product small scale production, unmanned transportation vehicles are rapidly increasing in utilization of unmanned transportation vehicles that carry and arrange goods in the work space. The conventional unmanned vehicle detected its position by using the guided line method and the position based method for indoor location recognition and movement. This method has disadvantages of initial high cost and maintenance / maintenance. In this paper, to solve the disadvantages, the method of predicting the direct path of the unmanned vehicle through the Kalman filter is verified using the white LED marker of the warehouse and the position data and the image data of the white LED marker recognition image. Through this, the reliability of the linear movement which occupies the most part in the lattice structure is secured. It is also expected that the reliance on additional position sensors will also be reduced.

• Convergence Security Journal
• /
• v.11 no.3
• /
• pp.99-111
• /
• 2011

The management and deposit of paper document costs are increased gradually. Specially, it is too expensive to safekeeping paper document in the warehouse. Also paper based document system is exposed in several security problems. Therefore, demands of transformation process from paper document into electronic ones are quietly needed. Electronic document repository system is one of the best solutions for solving paper based document system issues. Electronic document repository system can reduce overall costs and provides some advantages in comparison with paper based document system. But, electronic document repository system has no formal methodology for guarantee safeties. Therefore, we suggest a security mechanism for establish electronic document repository system. Suggested security methodology can help for design of more secure electronic document repository system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.82-91
• /
• 2020

Recently, the research and development of weapon systems have expanded from ILS centered on acquisition costs to LCS, including operating maintenance costs. Regulations define the provision and formula of operating maintenance costs, but this does not consider the characteristics of the design and operation/maintenance of real weapon systems based on engineering calculations. Therefore, this study suggests a simulation design method to complement these areas and produce more accurate operating maintenance costs. The research procedures are as follows. First, the provision and formula of operating maintenance costs were defined to make the simulation results applicable. Second, a simulation model was developed by reviewing design considerations so that the simulation results reflect reality more accurately. The design considerations include the PBS of weapon systems, operation schedules, specifications for operation/maintenance/warehouse facilities, and basic cost information (personnel expense and spare part/equipment cost). This study is expected to be effective in calculating the operating maintenance costs more easily and accurately.