• Steel and Composite Structures
• /
• v.45 no.6
• /
• pp.865-876
• /
• 2022

The slit members have lower strength and lower stiffness, which might lead to lower energy dissipation. In order to improve the seismic performance of the slit members, the paper proposes the shear lead damper, which has stable performance and small deformation energy dissipation capacity. Therefore, the shear lead damper can set in the vertical silts of the slit member to transmit the shear force and improve energy dissipation, which is suitable for the slit member. Initially, the symmetrical teeth-shaped lead damper was tested and analyzed. Then the staggered teeth-shaped lead dampers were developed and analyzed, based on the defect analysis and build improvements of the symmetrical specimen. Based on the parameter analysis, the main influence factors of hysteretic performance are the internal teeth, the steel baffles, and the width and length of damper. Finally, the theoretical analysis was presented on the hysteretic curve. And the skeleton curve and hysteresis path were identified. Based on the above theoretical analysis, the design method was proposed, including the damping force, the hysteresis model and the design recommendations.

• Journal of Information Processing Systems
• /
• v.19 no.6
• /
• pp.791-802
• /
• 2023

The manual inspection of photovoltaic (PV) panels to meet the requirements of inspection work for large-scale PV power plants is challenging. We present a hot spot detection and positioning method to detect hot spots in batches and locate their latitudes and longitudes. First, a network based on the YOLOv3 architecture was utilized to identify hot spots. The innovation is to modify the RU_1 unit in the YOLOv3 model for hot spot detection in the far field of view and add a neural network residual unit for fusion. In addition, because of the misidentification problem in the infrared images of the solar PV panels, the DeepLab v3+ model was adopted to segment the PV panels to filter out the misidentification caused by bright spots on the ground. Finally, the latitude and longitude of the hot spot are calculated according to the geometric positioning method utilizing known information such as the drone's yaw angle, shooting height, and lens field-of-view. The experimental results indicate that the hot spot recognition rate accuracy is above 98%. When keeping the drone 25 m off the ground, the hot spot positioning error is at the decimeter level.

• BMB Reports
• /
• v.42 no.10
• /
• pp.636-641
• /
• 2009

The penetrating of monoclonal antibodies (mAbs) into solid tumor may be hampered by their large size. The antibody mimetics, composed of two complementarity-determining regions (CDRs) through a cognate framework region (FR), have been demonstrated to have the capacity to penetrate tumors superior to its parental intact IgG. In this study, we used CDR and FR sequences from the humanized anti-HER2 monoclonal antibody trastuzumab to design four antibody mimetics. Then these antibody mimetics were fused to human IgG Fc to generate mimetics-Fc small antibodies. One of the four mimetics-Fc antibodies binds well to HER2-overexpressing SK-BR3 cells and effectively inhibits the binding of trastuzumab. This mimetics-Fc, denoted as HMTI-Fc, was shown to be effective in mediating antibody-dependent cellular cytotoxicity and exhibit an antiproliferative effect in SK-BR3 cells. To our knowledge, the HMTI-Fc antibody shown here is the smallest fully functional antibody and may have a potential for treatment of cancer.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.11
• /
• pp.5897-5901
• /
• 2012

The aim of the study was to clarify the role of gastrokine 1 in the process of formation and development of gastric cancer. The expression of gastrokine 1 in gastric cancer and corresponding non-cancerous gastric tissues of 52 gastric cancer patients was assessed with the real-time fluorescence quantitative polymerase chain reaction (RT-PCR) and immunohistochemistry. We also analyzed the relationship between the expression level and clinicopathological characteristics. Gastrokine 1 gene and protein expression in gastric cancer tissues was in both cases significantly lower than in corresponding non-cancerous gastric tissues (both P<0.01), but no significant relationship was found with clinicopathological parameters including tumor location, depth of invasion, differentiation, lymph node metastasis, stage, gender, age and carcinoembryonic antigen (CEA), and carbohydrate antigen 19-9 (CA19-9) level in peripheral blood preoperation of patients (P>0.05, respectively). Furthermore, gastrokine 1 gene expression was markedly lower in gastric cancer tissues of Helicobacter pylori (HP)-positive patients than negative ones (P<0.05). The result of the study showed that gastrokine 1 might play a significant role in the process of formation and development of gastric cancer as an anti-oncogene. Its effect might be weakened by HP infection.

• The Journal of the Korean Society for Microbiology
• /
• v.11 no.1
• /
• pp.57-67
• /
• 1976

A total of 100 swelled, springered or flippered canned meat and fish products were studied the degree of contamination with clostridias and serological relationships to Hobbs'13 "heat resistant" types, heat resistance of spores and susceptibility of Clostridium perfringens isolates to several antibiotics. Samples examined in this study were collected from Seoul area from June to October, 1975 and prepared in Korea. Clostridias were isolated from 46(46%) of these samples; 19 strains of Cl. perfringens, 9 strains of Cl. oedematiens A, B, 5 strains of Cl. sordelli, each 3 strains of Cl. chauvoei, Cl, oedematiens C.E, and Cl. difficile, 2 strains of Cl. sporogenes. The highest percentage of contamination by Cl. perfringens was found in beef products(26.5%), and the following(5.2%) in mackerel pike and none in baitop shell. whale, manna brand. and top shell. One of 19 isolates of Clostridium perfringens found in meat products was shown to produce heat resistant spores which resist $100^{\circ}C$ for 60 minutes and others were heat labile strains which is killed at $90^{\circ}C$ for 30 minutes. The distribution of Hobbs' serotype of 19 isolates were each 4 strains of type 6, 8, and 11, 1 strain of type 13 and others untypable. 19 Strains of Cl. perfringens were shown a marked susceptibility to cefamezin, lincomycin and minocin and relatively sensitive to vibraimycin, geopen, and chloramphenicol. A marked resistance to kanamycin, colimycin, and gentamycin were shown. Aerobic enteropathogens from samples were not recovered.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.1
• /
• pp.94-99
• /
• 2017

Objective: The aim of this study was to investigate the expression of heat shock protein (HSP) 90, 70, and 60 in chicken muscles and their possible relationship with quality traits of meat. Methods: The breast muscles from one hundred broiler chickens were analyzed for drip loss and other quality parameters, and the levels of heat shock protein (HSP) 90, 70, and 60 were determined by immunoblots. Results: Based on the data, chicken breast muscles were segregated into low (drip loss${\leq}5%$), intermediate (5%${\geq}9.5$) drip loss groups. The expression of HSP90 and HSP60 were significantly lower in the high drip loss group compared to that in the low and intermediate drip loss group (p<0.05), while HSP70 was equivalent in abundance in all groups (p>0.05). Conclusion: Results of this study suggests that higher levels of HSP90 and HSP60 may be advantageous for maintenance of cell function and reduction of water loss, and they could act as potential indicator for better water holding capacity of meat.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.32-37
• /
• 2005

The characteristics of the metal melting and radionuclide distribution of the radioactive has been investigated in a lab-scale arc furnace. The slag former based on the constituents of silica, calcium oxide, aluminum oxide, borate and calcium fluoride additions was used for melting of the stainless and carbon steel. In the melting of the stainless steel, the amount of slag formation increased with an increase of the concentration of the slag former. But the effects of the slag basicity on the amount of stag formation showed a local maximum value of the slag formation with an increase of the basicity index in the melting of the stainless steel as well as in the melting of the carbon steel. With an increase of the amount of slag former addition, the trends of the cobalt distribution into the ingot and the stag depended on the kind of slag former used in the melting of the stainless steel while the effect of the slag basicity on the distribution of the cobalt was not clarified in the melting of carbon steel. Tn the melting of the carbon steel, the strontium was captured at up to $50\%$ into the slag phase. Cesium was completely eliminated from the melt of the stainless steel as well as the carbon steel and distributed to the dust phase.

• Advances in Traditional Medicine
• /
• v.5 no.1
• /
• pp.1-15
• /
• 2005

Ginseng is a popular medicinal plant highly valued throughout the world. Asian ginseng is one of the most common species of ginseng. It has long occupied a significant position in oriental medicine and has been justified its name as the 'king herb'. As a nutritional supplement, ginseng is an extremely common and popular herbal medicine in the United States and Canada in recent decades. The multiple constituents of ginseng possess equally multifaceted pharmacological actions as demonstrated by numerous studies. Ginseng root and its constituents influenced the central nervous system, endocrine, cardiovascular, gastrointestinal system, sexual, renal organ and immune system, etc. One important action is its anti-hyperglycemic effect. Previous studies on ginseng demonstrate that only the root of ginseng has been used in the treatment of diabetes, while the other parts of ginseng plant were always neglected. Recently, we analyzed the constituents of ginseng berry, leaf and discovered that ginseng berry, leaf extracts and its total ginsenosides have the ability to reduce hyperglycemia and body weight and increase the peripheral glucose utilization in obese or diabetic ob/ob or db/db mice. Our data suggest that all parts of ginseng plant, including root, berry, leaf and stem exhibit potent anti-hyperglycemic and anti-obese effects and may provide an opportunity to develop a novel class of anti-diabetic agents.

• Advances in Traditional Medicine
• /
• v.6 no.4
• /
• pp.286-292
• /
• 2006

In this study, we evaluated the antiproliferative effects of Panax notoginseng, ginsenoside Rb1, and notoginsenoside R1 in the human breast carcinoma MCF-7 cell line. Our results indicated that both Panax notoginseng radix extract (NRE) and Panax notoginseng rhizoma extract (NRhE) possess significant antiproliferative activities in MCF-7 cells. Compared to control group (100%), at the concentrations of 0.05, 0.5, and 1.0 mg/ml NRE, cell growth was concentration-dependently reduced to 81.0 ${\pm}$ 6.1 (P < 0.01), 34.2 ${\pm}$ 4.8 (P < 0.001), and 19.3 ${\pm}$ 1.9 (P < 0.001), respectively. Similar results with NRhE at concentrations of 0.5 and 1.0 mg/ml were obtained in these MCF-7 cells. To identify the responsible chemical constituent, we tested the antiproliferation effects of two representative saponins, ginsenoside Rb1 and notoginsenoside R1, on the MCF-7 cells. The data showed that ginsenoside Rb1 was endowed with antiproliferative properties, while notoginsenoside R1 did not have an inhibitory effect in the concentrations tested. Our studies provided evidence that Panax notoginseng extracts and ginsenoside Rb1 may be beneficial, as adjuvants, in the treatment of human breast carcinoma.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.314-316
• /
• 2006

In this paper, the plastic organic thin-film transistors (OTFTs) with $32{\ast}32$ array are presented. Flexible organic light emitting diodes (OLEDs) operated by OTFTs are fabricated with a novel lamination method and the results are also presented. OTFT pixels defined by photolithography, and pentacene deposited by thermal evaporation. Fabrication method and the performances of green PHOLEDs with high efficiency, stability, and electrical performance are discussed.