• 제목/요약/키워드: Walsh sequence

검색결과 24건 처리시간 0.016초

CDMA Digital Mobile Communications and Message Security

  • 이만영
    • 정보보호학회논문지
    • /
    • 제6권4호
    • /
    • pp.3-38
    • /
    • 1996
  • The mobile station shall convolutionally encode the data transmitted on the reverse traffic channel and the access channel prior to interleaving. Code symbols output from the convolutional encoder are repeated before being interleaved except the 9600 bps data rate. All the symbols are then interleaved, 64-ary orthogonal modulation, direct-sequence spreading, quadrature spreading, baseband filtering and QPSK transmission. The sync, paging, and forward traffic channel except the pilot channel in the forward CDMA channel are convolutionally encoded, block interleaved, spread with Walsh function at a fixed chip rate of 1.2288 Mcps to provide orthogonal channelization among all code channels. Following the spreading operation, the I and Q impulses are applied to respective baseband filters. After that, these impulses shall be transmitted by QPSK. Authentication in the CDMA system is the process for confirming the identity of the mobile station by exchanging information between a mobile station and the base station. The authentication scheme is to generate a 18-bit hash code from the 152-bit message length appended with 24-bit or 40-bit padding. Several techniques are proposed for the authentication data computation in this paper. To protect sensitive subscriber information, it shall be required enciphering ceratin fields of selected traffic channel signaling messages. The message encryption can be accomplished in two ways, i.e., external encryption and internal encryption.

광대역 CDMA WLL 시스템을 위한 변조기 채널 카드 및 VLSI 칩 설계 및 구현 (Design and Implementation of Modulator Channel Card and VLSI Chip for a Wideband CDMA Wireless Local Loop System)

  • 이재호;강석봉;조경록
    • 한국통신학회논문지
    • /
    • 제24권10A호
    • /
    • pp.1571-1578
    • /
    • 1999
  • 본 논문은 Direct Sequence Code Division Multiple Access (DS-CDMA) Wireless Local Loop (WLL) 시스템의 Radio Transceiver Unit (RTU)를 위한 변조기 채널 카드와 변조기 VLSI 칩의 설계 및 구현에 대해서 서술했다. 변조기 채널 카드는 ASIC, FPGA 그리고 DSP를 이용하여 구현하였다. 구현된 변조기 ASIC칩은 ETRI가 제안한 Common Air Interface (CAI) 규격을 따랐고, 동작주파수는 32MHz, 회로의 크기는 40,000 게이트이다. 그리고 $0.6\mu\textrm{m}$ CMOS 공정으로 제작되었다. 본 변조기 ASIC 칩은 4개의 I,Q 채널을 처리할 수 있는 구조로 되어 있고 각 채널은 콘벌루션널 코딩, 블록 인터리빙, 스크램블링, 왈쉬 카버링, Pseudo Noise (PN) 확산 그리고 기저대역 필터링 기능 등을 포함한다. 변조기 채널 카드는 WLL 시스템 내 RTU의 서브 유니트의 하나이며 구현된 변조기 ASIC 및 채널 카드는 실제 WLL 시스템에 실장되어 그 성능 및 기능 요구사항을 만족함을 확인할 수 있었다.

  • PDF

2차원 바코드를 이용한 오디오 워터마킹 알고리즘 (A digital Audio Watermarking Algorithm using 2D Barcode)

  • 배경율
    • 지능정보연구
    • /
    • 제17권2호
    • /
    • pp.97-107
    • /
    • 2011
  • 본 논문에서는 2차원 바코드를 이용한 오디오 워터마킹 알고리즘을 제안하였다. 삽입되는 워터마크 정보로는 2차원 바코드인 QR 코드를 변형하여 이용하였다. 2차원 바코드가 1차원 바코드에 비하여 많은 정보를 표현할 수 있고, 코드자체가 에러 보정능력을 내재하고 있는 장점을 이용하여 워터마킹 알고리즘의 견고성을 높였다. 또한 부분적인 워터마크 정보의 손실에 대응하기 위하여 직교코드를 이용하여 삽입대역을 확산했으며, 삽입강도 0.7에서 50dB 이상의 우수한 품질을 확보할 수 있었다.

IS-95B 순방향 채널에서의 멀티코드 CDMA 시스템의 성능분석 (Performance Analysis of Multi-Code CDMA System over IS-95B Forward Channel)

  • 곽재민;최창호;이영교;오창헌;김언곤;조성준
    • 한국통신학회논문지
    • /
    • 제25권5B호
    • /
    • pp.879-888
    • /
    • 2000
  • 본 논문에서는 데이터 서비스를 위해 멀티코드 방식을 채택한 IS-95 CDMA 시스템의 순방향 링크 성능를 이론분석과 시뮬레이션을 통해 얻어낸다. AWGN, 다중사용자간섭, 다중경로간섭, 그리고 다중경로 페이딩이 존재하는 채널을 고려하였으며, 다중경로 채널은 TDL(Tapped Delay Line) 모델을 적용하였다. 실제적인 성능분석을 위해 왈쉬코드와 M계열 PN 코드가 연접된 IS-95B CDMA 시스템의 성능을 분석하였다. 음성 활성화율, 음성/데이터 사용자의 요구 SNR, 멀티코드 수, 음성/데이터 사용자 수 등을 파라미터로 하여 Qos를 만족시키는 음성/데이터 서비스에 대한 BER 성능을 구하고 음성 사용자에 대한 최대 용량을 정량적으로 분석하였다. 결과에 의하면, IS-95B 순방향 시스템에서 음성 사용자의 최대 용량이 38명일 때 데이터 사용자가 1명인 경우와 4명인 경우에 멀티코드 수를 하나씩 감소시킴에 따라 음성 사용자의 용량은 각각 5.5%, 22.3%씩 증가하였다. 따라서, 채널 환경과 트래픽 특성에 따라 데이터 사용자에게 할당되는 멀티코드 수와 요구 QoS를 제어함으로써 IS-95B CDMA 시스템에서 수용할 수 있는 최대 사용자 수를 증대시킬 수 있다.

  • PDF