• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.1
• /
• pp.120-132
• /
• 1998

This stusy was to investigate the marginal fitness of porcelain-fused-to- metal crown after succesive firing cycle. Main variables were the degree of marginal curvature of labiocervical margin and the type of alloy. The exaggerated marginal curvature(EMC) was created by additional reduction at the faciocervical wall of the normallized marginal curvature (NMC)-typed ivorine tooth by using milling machine. The difference in the shape was the mid facial margin was placed 2mm apical to cemento- enamel junction in labial surface. Three types of alloy were high noble, noble, and base metal alloy. Test specimens were divided into 8 groups and each group had 8 specimens. Sixty four ceramometal crowns were made totally. Measurement stages were following degassing, opaquing. body porcelain firing, and glazing, and measuring sites were 4. (midmesial, midfacial, middistal, and midlingual). Digital, travelling measuring microscope (0.5 um precision, Olympus. Japan) was used under ${\times}250$ magnification. Within the limitation of this investigation, it was concluded as belows: 1. The pattern of marginal distortion was varied. Degassing stage was not a specific, causative stage that induce most of total marginal distortion during whole procedure fabricating a ceramometal crown. Body firing stage induced discrepancy relatively more than other firing stages. 2. The specimens that were Ni-based alloy and had EMC were distorted persistently following successive fabricating procedures. But marginal openings were decreased after glazing. 3. The release of metal grinding-induced stress was presumed as a cause that induce marginal distortion. 4. The amount of discrepancies of the labial and lingual margins were greater than that of the mesial and distal margin in the specimen that had EMC. 5. Silver-plated die was not enough to resist abrasion during repeated seating of metal copings on the die-holding device.

• Archives of Craniofacial Surgery
• /
• v.21 no.4
• /
• pp.219-224
• /
• 2020

Background: Repair of the orbital floor following trauma or tumor removal remains a challenge because of its complex three-dimensional shape. The purpose of the present study is to understand normal orbital floor anatomy by investigating its differences across four groups (Caucasian American and East Asian, males and females) via facial bone computed tomography (CT). Methods: A total of 48 orbits in 24 patients between 20 and 60 years of age were evaluated. Although most patients underwent CT scanning following trauma, the orbital walls were intact in all patients. Linear and angular measurements of the orbital floor were obtained from CT images. Results: Orbital floor width, length, angle between the orbital floor and medial wall, and distance from the inferior orbital rim to the lowest point of the orbital floor did not show a statistically significant difference between groups. Angles made by the infraorbital rim, the lowest point of the floor, and the anterior border of the infraorbital fissure were statistically significantly wider in East Asian females than in male groups. The floor depth in East Asian females was significantly smaller compared to all the other groups. Conclusion: East Asian female population had smaller curvature and depth of an orbital floor than the other groups, which means racial and sex-related differences should be considered in the orbital floor reconstruction.

• Journal of the Korean Institute of Educational Facilities
• /
• v.20 no.1
• /
• pp.3-14
• /
• 2013

The following research, analysis about an integral part of current elementary classroom, has been done to grasp the importance of re-organization of an elementary school classroom. For the research process 11 schools, 60 classrooms have been studied to analyze the physical elements of classroom(learning tools, equipment, etc.) to provide deeper understanding on their display, and spatial arrangement, as well as characteristic of a classroom. By looking at these analyzed elements with perspective to the grade, the number of students per class, the result turned out to be uninteresting. The observation that was made by this analysis was that there are more usages of multi-purpose desk in the classroom when there are only a few numbers of students. Also the observation could be made on the classroom wall-post. Each post had a tendency to have its defined area to be posted. The analysis showed that there are total of 24 corners can be created in the classroom, also it distinctly showed that the number of corners gets changed depending on the number of students in the classroom. The 24 corners including learning tools, equipment, and posts could be sorted to a minimum of 11 areas and a maximum of 22 areas depending on the educational purpose of the corners. The current layout of these corner and area will be the primary component that will be needed for the new coming classroom. For the future progress, depending on the system of education, the following needs to be done: (1) The installation of corners in the classroom (2) A small common-lounge area between two classrooms (3) A common-corner for each grade (4) Deeper research will be required to discuss the installation of a wide-educational area.

• Tuberculosis and Respiratory Diseases
• /
• v.78 no.4
• /
• pp.419-422
• /
• 2015

We presented a case of unusual endobronchial inflammatory polyps as a complication following endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA) in a patient with tuberculous lymphadenitis. EBUSTBNA of the right hilar lymph node was performed in a 29-year-old, previously healthy man. The patient was confirmed with tuberculous lymphadenitis and received antituberculosis medication over the course of 6 months. Chest computed tomography, after 6 months of antituberculosis therapy following the EBUS-TBNA showed nodular bronchial wall thickening of the right main bronchus. Histological and microbiological examinations revealed inflammatory polyps. After 7 months, the inflammatory polyps regressed almost completely without need for removal.

• Journal of Embryo Transfer
• /
• v.12 no.1
• /
• pp.111-116
• /
• 1997

The present study was carried out to produce in vitro fertilized embryos with immature follicular oocytes collected by transvaginal aspiration from Holstein cows. A simple aspiration apparatus consists of two stainless steel tubes, an inner tube (needle holder; 1.2cmdiameter, 55cm long) and an outer tube (1.5cm diameter, 4Scm long), and a hand-operated vacuum pump was used. Under epidural anesthesia, the needle guide was passed into the vagina of the cow to a point next to the cervix. An ovary was placed against the wall of the vagina over the end of the aspiration needle by rectal manipulation. As the needlepassed into the ovary, an assistant was asked to apply vacuum(l00mrnHg) and the ovary was manipulated back and forth in all directions over the needle. When all sites of the ovary was aspirated, the needle was withdrawn and the needle guide was moved to the other side of ovary and the procedure was repeated. When the oocyte aspiration procedure was finished, collected fluid was transported to laboratory. Oocytes surrounded with at least 1 layer of cumulus cells were matured, fertilized and cultured in vitro. The results were as follows; Ninety seven oocytes were collected by transvaginal aspiration from seventeen Holstein cows(5.7 /head). The number of oocytes surrounded with at least 1 layer of cumulus cells were 60(61.9%). Following in vitro maturation, fertilization and culture, the cleavage and development rate to morula+blastocyst were 83.3% and 30.0%, respectively. From this study, transferable in vitro fertilized embryos could be produced with imma- ture follicular oocytes collected by transvaginal aspiration from Holstein cows using a simple aspiration apparatus.

• Journal of Chest Surgery
• /
• v.57 no.3
• /
• pp.291-299
• /
• 2024

Background: Postoperative pain management following minimally invasive repair of pectus excavatum (MIRPE) remains a critical concern due to severe post-procedural pain. Promising results have been reported for cryoanalgesia following MIRPE; however, its invasiveness, single-lung ventilation, and additional instrumentation requirements remain obstacles. Serratus anterior plane block (SAPB) is a regional block technique capable of covering the anterior chest wall at the T2-9 levels, which are affected by MIRPE. We hypothesized that SAPB would be a superior alternative pain control modality that reduces postoperative pain more effectively than conventional methods. Methods: We conducted a retrospective study of patients who underwent MIRPE between March 2022 and August 2023. The efficacy of pain control was compared between group N (conventional pain management, n=24) and group S (SAPB, n=26). Group N received intravenous patient-controlled analgesia (IV-PCA) and subcutaneous local anesthetic infusion. Group S received bilateral continuous SAPB with 0.3% ropivacaine after a bilateral bolus injection of 30 mL of 0.25% ropivacaine with baseline IV-PCA. Pain levels were evaluated using a Visual Analog Scale (VAS) at 1, 3, 6, 12, 24, 48, and 72 hours postoperatively and total intravenous rescue analgesic consumption by morphine milligram equivalents (MME). Results: Mean VAS scores were significantly lower in group S than in group N throughout the 72-hour postoperative period (p<0.01). Group S showed significantly lower MME at postoperative 72 hours (group N: 108.53, group S: 16.61; p<0.01). Conclusion: SAPB improved immediate postoperative pain control in both the resting and dynamic states and reduced opioid consumption compared to conventional management.

• Journal of the Korean housing association
• /
• v.16 no.4
• /
• pp.17-28
• /
• 2005

The purpose of this study was to find out the residents' needs fur rural houses and to suggest the policy directions for developing Korean rural viewscape houses. The subjects were 386 houses and residents. They were selected according to accessibility, area characteristics, administrative district, and village types. The data were collected by using the interview and observation method based on the questionnaire. By analyzing the residents' needs for rural houses, the following conclusions were derived: 1) In order to preserve the rural characteristic, the government should lead to establish the yard space and the exterior design factors such as wall material and color, and the shape, material, and color of roof. 2) At the same time, the government should provide the residents with the subsidy for house improvement, so that they can build the desirabe size of house and the aged remodel their houses. 3) The contemporary design model of rural Han-ok should be developed and built. 4) The new rural house model improving roof design should be developed, because present houses with slab roofs and skirt roofs spoil the harmony with the rural natural environment. 5) The direction of rural houses for viewscape was defined as to satisfy residents' needs for convenient housing lift and to harmony visual and physical factors - building form, material and color - involving Korean rural housing culture.

• ALGAE
• /
• v.18 no.2
• /
• pp.107-119
• /
• 2003

Neosiphonia is separated from the traditionally well known genus Polysiphonia (Rhodomelaceae, Rhodophyta) and 12 species includes in Korea. In this study, the vegetative and reproductive developments of two Neosiphonia species, N. decumbens (Segi) M.S. Kim et I.K. Lee and N. harlandii (Harvey) M.S. Kim et I.K. Lee, are reinvestigated. N. decumbens is diagnosed by following combination of the characters: plants 1-3 cm high, dwarf, decumbent, main axes indistinct, irregularly branched in dichotomous manner, and alternately or secundly ramified with wide angles above. N. harlandii is distinguished by the features: plants 4-8 cm high, usually solitary and saxicolous, erect, densely corticated at base of distinct main axes, rather irregularly alternate in branch, and with cicatrigenous branchlets developed numerously on every part of frond. The two species share typical characteristics of the genus Neosiphonia, such as a base attached by unicellular rhizoids, cut off by cross wall, pericentral cells in 4, trichoblasts moderately developed near the apex of branches, leaving persistent scar-cells, tetrasporangia arranged in a spiral series, procarps with 3-celled carpogonial branch, and spermatangial branches arising as a primary branch of trichoblast. Taxonomy of the two Neosiphonia in regard to Polysiphonia is discussed.

• Journal of the Korean housing association
• /
• v.20 no.1
• /
• pp.101-112
• /
• 2009

The purpose of this study is to find out the preference and the needs of old womens on the life support appliances i.e. medication dispenser, video phone, activity monitor and sleep monitor. The appliances may be improved reflecting the result of the questionnaire asking about the preferred functions and designs. The respondents were 141 female seniors of 65 years and older, living in Ulsan city or Cheongju city, Korea. Following is the list of results. (1) The medication dispenser, responded as highly preferred, met some worries over the troubles by power stoppage especially while one is out, letting her forget the medication time. (2) The video phone was worried over the cases of hearing failure by small sound, and watching failure by weakening sight. (3) The activity monitor, like the medication dispenser, was worried about the troubles while one is out or out of the monitoring scope, its expense, and the privacy, (4) The sleep monitor met the worries over the inadequacy for the sleeping mat on the floor and the emission of electromagnetic waves. (5) The preferred designs were (1) white or red standing medication dispenser, (2) wall-mounted video phone working by voice, (3) metal activity monitor sensor with white or yellow bracelet.

• Journal of architectural history
• /
• v.23 no.4
• /
• pp.7-17
• /
• 2014

This paper aims at researching the cave concept of the Japanese architect Terunobu Fujimori and the result could be summarised as follows. First, a cave is Fujimori's only theme related to the interior space. He set some design guidelines for practice concerning openings of the wall and finishing materials of the interior, following the two major characteristics of a cave: 'comfortability' and 'homogeneity in material'. And 'fire' was also the premise in the cave as a 'spirit' of the space. Second, Fujimori applied the concrete guidelines to Tanpopo House (1994~95), which had in fact borne the ideas. Yakisugi House (2005~07) that took the cave as its design theme showed the transition of his cave concept, from closedness to openness. Third, though his cave concept might deserve the criticism that it is inclined to 'image' rather than 'essence', it illustrates that he seeks after an archetype of human dwelling before the purity of the original space was tarnished with rationality and abstraction. And the cave idea allows the seemingly contradictory 'sachlich' and 'surrealistic' features to coexist. Summing up, Fujimori's cave concept proves that his architecture is a rejection of the Cartesian modernist ideal and the contemporary architects' desire for dematerialisation. In a fundamental level, however, it is a result of his strategic choice induced by his own primary principle that his building must not be similar to any styles in history or any other architects' works in the world.