• Journal of the Korean Ceramic Society
• /
• v.13 no.3
• /
• pp.3-12
• /
• 1976

The corelation between surface tensions and surface appearances of SK O5a opaque glazes for earthen wares were investigated. The surface tension values were theoretically calculated by using Dietzel's factors of constituent oxides of glaze. The surface appearances of glazes, especially the pinhole phenomena were strongly effected by the surface tension values showing the following general tendencies: (1) In the range of 305±3 dynes/cm of surface tensions, glazes showed almost no pjnholes. (2) In the range of surface tensions less than 300 dynes/cm, the large numbers of small pinholes or eggshell textures were observed. (3) In the range of surface tensions higher than 310 dynes/cm, large and deep pinholes were observed. (4) The contact angles of glazes on the wall tile body substrate are in the good proportional agreement with the surface tension values calculated by Dietzel's factors.

• Journal of the Korea Furniture Society
• /
• v.26 no.1
• /
• pp.92-99
• /
• 2015

The following research focused on developing a new concept of lighting design with design factors which considered combining common natural objects with feelings. The purpose of this research is to write a thesis that deals with the whole process of developing a design for 'FEELighting' that is applicable to daily life through developing a form of lighting, which prioritizes feelings rather than materials, forms, or functions, and enhance the quality of people's lives. In particular, the process has been materialized by defining a new concept of 'FEELighting' (Feeling + Lighting), researching and analyzing the original and unfamiliar correlation between feeling and lighting, and choosing the embedded acrylics lighting items that can undergo small quantity batch production. As a result, prototypes of various forms of lightings that could be applied to daily lives -ceiling lights, wall light lamps, and table lamps-, which were made by combining numerous common natural objects and surpassed simple function and created to surpass simple lighting function, were presented through every process of design development.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.189-196
• /
• 1990

In the present study, a new method of generating boundary-fitted coordinates systems controlled by control function is introduced. Application of the method to a three-dimensional simply-connected region is the demonstrated. The numerical grid generation has following feat ures, (a) The generated boundary fitted coordinates is well concentrated in near wall region and satisfied orthogonality, (b) The grid control function is fully automatic and well controlled in sharp convex boundary.

• Korean Journal of Veterinary Research
• /
• v.50 no.4
• /
• pp.319-322
• /
• 2010

A 3-day-old Appaloosa colt was examined because of acute onset of ataxia, left-sided head tilt, fever and heart murmur. The foal continued to nurse but became increasingly depressed and mild colic. On plain radiological examination, the foal was normal. Uroperitoneum was diagnosed following abdominocentesis. Postmortem examination revealed bladder rupture. The lesion was in the dorsomedial part of the bladder wall. We suggested that the cause of bladder rupture was parturient trauma. Even though the rupture was associated with trauma, the margin of rupture of bladder was clearly smooth and regular.

• Journal of Chest Surgery
• /
• v.22 no.4
• /
• pp.655-660
• /
• 1989

The unroofed coronary sinus syndrome is a spectrum of cardiac anomalies in which part or all the common wall between the coronary sinus and the left atrium is absent. This defect is part of a developmental complex which includes absence of the coronary sinus and termination of a persistent left superior vena cava in the left atrium. Recognition of this complex is important so that interruption or diversion of the left superior vena cava may be done to prevent subsequent central nervous system complications. Surgical correction uses an intraatrial baffle to divert flow from the left superior vena cava to right atrium and to close the atrial septal defect. This report describes a 7 years old female patient in whom the left superior vena cava was identified preoperatively and the complex [unroofed coronary sinus syndrome, common atrium, mitral valve cleft] recognized at the time of operation. Surgical correction, following repair of cleft mitral valve, utilized a Dacron patch baffle to route the left caval blood to the right atrium and included closure of the atrial septal defect

• Journal of Chest Surgery
• /
• v.21 no.6
• /
• pp.1145-1151
• /
• 1988

Supraventricular tachyarrhythmias are readily characterized and understood, but the surgical procedures for their correction are complex and not easily mastered. Conversely, ventricular tachyarrhythmias are frequently difficult to characterize and localize electrophysiologically and their basic mechanisms are poorly understood. The role of the surgeon in the treatment of cardiac arrhythmia has changed dramatically during the past decade. This report is a case of 26 years old male with supraventricular tachyarrhythmia. The result of endocardial electrophysiologic study demonstrated accessory pathway connecting left atrium to left ventricle which located at left atrial free wall about 4 cm apart from the coronary sinus orifice. The accessory bundle interruption has been successfully accomplished utilizing the internal open heart technique. The operation consisted of dissection of the atrioventricular fat pad and division of all the superficial fibers going from the ventricle to the annulus. Following this, cryoablation made with cryoprobe at - 60` for 90 seconds. The accessory pathway was successfully ablated without specific problems.

• Journal of Chest Surgery
• /
• v.28 no.9
• /
• pp.869-871
• /
• 1995

Esophageal duplication cysts are uncommon, benign lesions of the esophagus. They are rare congenital foregut anomalies. To be considered an esophageal duplication cyst, a lesion must meet the following criteria:1 the cyst in the esophageal wall 2 the cyst is covered with a muscularis propria,generally of two layers and 3 the cyst has an epithelial lining consistent with that of the 4 week embryo, which may be columnar or pseudostratified columnar, and may be ciliated. Herein we report a case of an esophageal cyst located within the thoracic cavity, which is, to the best of our knowledge, the first case reported in Korea. Surgery is generally the treatment of choice for esophageal cyst, and was indicated in this case for the diagnosis and management of symptoms attributable to the cyst.

• Journal of Chest Surgery
• /
• v.28 no.9
• /
• pp.857-860
• /
• 1995

In a 53-year old male with post-infarction ventricular septal defect [VSD , owing to an acute exacerbation of pulmonary edema, respiratory failure developed, and the ventilatory support and intraaortic balloon counterpulsation [IABP were applied. At the following day, operation was performed with the aid of IABP. Under the cardioplumonary bypass, he underwent infarctectomy, trimming of VSD margin, patch closure of VSD and infarctectomy site. Left ventricular free wall rupture was detected during operation, which was confined with pericardial adhesion. Post-operative course was uneventful, and he could be discharged with minimal degree of dyspnea [NYHA class II .

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.72-77
• /
• 1995

Blast-furnace slag cement has been used widely as a structural material due to the latent hydraulicity of granulated ground blast furnace slag(GGBS)for a long time as The wall as ordinary portland cement. In this study, based on the fundamental investigation on the high strength and high durable concrete using the high fineness GGBS the following remarks can be made. 1) The average desired strenth of concrete is Or=600~800kg/$\textrm{cm}^2$. 2) The above high strength concrete using the high fineness GGBS is more workable than those using only OPC. 3) The adiabatic temperature and drying shringkage decrease, so the density and resistance to sea water attack increase as results. 4)The unit cement content and unit air entrained admixture at the same desired strength of concrete decrease, so the economical high strength concrete can be manufactured from using the high fineness GGBS.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.799-804
• /
• 2002

The compatibility of concrete repairs is proposed by D. Cusson et al. and N. K. Emberson et al. But this is the general compatibility of concrete repairs. This study is actualized the general compatibility of concrete repairs on the flexural specimen under bending load. This study is obtained following results. 1) As a results of analysis for repair effects on failure shape, debonding between concrete and repairs, yielding load and ultimate/yielding ratio, the repair effects is ascertained that the repair R3 is much excellent than the repair R7, but on the other hand R7 is very high than R3 on the viewpoint of compressive strength, where repair R7, R3 is a product. 2) Therefore the compatibility of concrete repair proposed by D. Cusson et al. and N. K. Emberson et al. must be reanalyzed for structures types of column, beam, wall, slab et al.