• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.45-46
• /
• 2007

• Journal of Biomedical Engineering Research
• /
• v.26 no.3
• /
• pp.145-150
• /
• 2005

A new gait detection system using both FSR (force sensing resistor) sensors and a gyrosensor was developed to detect various gait patterns. FSR sensors were put in self-designed shoe insoles and a gyrosensor was attached to the heel of a shoe. An algorithm was also developed to determine eight different gait transitions during four gait phases: heel-strike, foot-flat, heel-off and swing. The developed system was evaluated from nine heathy mans and twelve hemiplegic patients. Healthy volunteers were asked to walk in various gait patterns: level walking, fore-foot walking and stair walking. Only the level walking was performed in hemiplegic patients. The gait detection system was compared with a optical motion analysis system and the outputs of the FSR sensors. In healthy subjects, the developed system detected successfully more than $99\%$ for both level walking and fore-foot walking. For stair walking, the successful detection rate of the system was above$97\%$. In hemiplegic patients, the developed system detected approximately 98% of gait transitions. The developed gait phase detection system will be helpful not only to determine pathological gait phases but also to apply prosthetics, orthotics and functional electrical stimulation for patients with various gait disorders.

• Physical Therapy Rehabilitation Science
• /
• v.4 no.2
• /
• pp.115-120
• /
• 2015

Objective: To examine the effects of different shoe weights on lower leg muscle fatigue when walking by electromyographic (EMG) analysis due to the most effective weight for loading not being established. Design: Cross-sectional study. Methods: Thirty healthy university students (15 male, 15 female) were enrolled and randomly assigned into three conditions, which included wearing athletic shoes with an addition of 300 g, 500 g, and 1,000 g weights respectively. Prior to walking, all subjects were instructed to sit in a chair for 10 minutes. All subjects walked at a speed of 3.6 m/s on a treadmill for 20 minutes without rest. EMG measurements were taken using the median power frequency to assess for the effect of the different weight of shoes on muscle fatigue of the soleus, gastrocnemius, and tibialis anterior while walking on a treadmill in an upright posture. EMG measurements were taken during the first and last 30 seconds of walking. Results: In terms of muscle fatigue, for the soleus, the median power frequency was significantly lower with 1,000 g compared with 300 g and 500 g (p<0.05). For the tibialis anterior, the median power frequency was significantly lower with 1,000 g than 300 g and 500 g (p<0.05). For the gastrocnemius, the median power frequency was significantly lower with 1,000 g compared with 300 g (p<0.05). Conclusions: Increased shoe weight increases soleus, gastrocnemius, and tibialis anterior muscle fatigue during ambulation.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.2
• /
• pp.221-230
• /
• 2010

The purpose of this study was to analyze biomechanical factors of trail running shoes applied to korean shoe-lasts. 10 healthy male subjects with an average age of 37.2 years(SD=8.28), weight of 69.6 kg(SD=10.56) and a height of 171 cm(SD=4.93) were recruited for this study. Ten males walked on a treadmill wearing four different shoes. Foot pressure data was collected using a Pedar-X mobile system(Novel Gmbh., Germany) operating at the 1000 Hz. Surface EMG signals for tibialis anterior, gastrocnemius, vastus lateralis and biceps femoris were acquired at 1000 Hz using Noraxon TeleMyo DTS system(Noraxon Inc., USA). Foot pressure and leg muscle fatigue were measured and calculated during walking. The results are as follows: After walking 60 minutes, Type A showed a lower MPF. MPF values were significantly different from each muscle(p<.05). Therefore, Type A shoe might decrease muscle fatigue in the legs while walking. In addition, Type It showed that Type A shoe has the highest contact area and the lowest maximum pressure. As a result of the analysis, Trail running shoes will use a new design to reduce muscle fatigue and are expected to increase comfort and fitting.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.7
• /
• pp.641-646
• /
• 2011

A low cost gait analysis system, which can measure stride length, walking speed, and ground reaction force, is proposed. A gait analysis system is used for medical evaluation of patients and rehabilitation assistance. Low cost cameras are attached to a shoe and movement of a shoe is estimated using infrared LED landmarks. Ground reaction force is measured from pressure sensors, which are installed inside a shoe. Through experiments, it is shown that the proposed system can be used to obtain stride length, walking speed, and ground reaction force.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.2
• /
• pp.121-138
• /
• 2004

The design of soccer studs is important for providing friction on a variety of surfaces. We hypothesized that a certain type of soccer studs could improve performance due to high rotational friction. Thus, this study was conducted to determine the relationship between the frictional characteristics and different soccer stud design. Twelve recreational soccer players were recruited. Rotational friction data from the force plate was collected for all subjects during normal walking with 180 degree rotation. Walking speed was controlled at 1.2m/s (${\pm}\;0.1\;m/s$) with timing lights on infilled artificial turf. Three different types of soccer studs and one running shoe were tested. Repeated measures ANOVA was used to determine significance. Significant differences were found in rotational friction with four different shoes. Trx and World studs tended to have greater maximum rotational friction than the running shoe (Nova) and traditional soccer shoe(Copa Mondial). The results were as follow : world(25.95Nm) > trx(25.74Nm) > copa(22.50Nm) > nova(16.36Nm). The difference may be due to the number, location, size, and shape of studs. We concluded that stud design influences rotational friction between the shoe and surface during movement. Based on studs design and contact area, Trx with blade type studs are recommended since it showed high rotational friction for performance as well as enough contact area for stability. However, differences due to the mechanical properties of soccer studs are still being investigated.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.196-203
• /
• 2004

In this study, a new gait phase detection system using both FSR(Force Sensing Resister) sensors and a gyrosensor was developed to detect various gait patterns. FSR sensors were put in self-designed shoe insoles and a gyrosensor was attached to the posterior aspect of a shoe. An algorithm was also developed to determine eight different gait transitions among four gait phases: heel-strike, foot-flat, heel-off and swing. The developed system was compared with the conventional gait phase detection system using only FSR sensors in various gait experiments such as level walking, fore-foot walking and stair walking. In fore-foot walking and stair walking, the developed system showed much better accuracy and reliability to detect gait phases. The developed gait phase detection system using both FSR sensors and a gyrosensor will be helpful not only to determine pathological gait phases but to apply prosthetics, orthotics and functional electrical stimulation to patients with gait disorders.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.169-170
• /
• 2006

The purpose of this study was to evaluate the smoothness of the gait pattern according to shoe, walking speed, and slope. Eleven male university students used three types(running shoes, mounting climbing boots, elevated forefoot walking shoes) of shoes at various walking speeds(1.19, 1.25, 1.33, 1.56, 1.78, 1.9, 2.0, 2.11, 2.33m/s) and gradients (0, 3, 6, 10%) on a treadmill. Three-dimensional motion analysis (Motion Analysis Corp, Santa Rosa, CA, USA) was conducted with 4 Falcon high speed cameras. The results showed that elevated forefoot walking shoes had the lowest value of normalized jerk at the heel, which means that elevated forefoot walking shoes had the smoothest walking pattern at the heel. In contrast, elevated forefoot walking shoes had greater normalized jerk at the center of mass (COM) at most walking speeds, which means that the smoothness of gait pattern at the center of mass is the lowest for the elevated forefoot walking shoes. This movement at the COM might even have a beneficial effect of activating muscles in the back and abdomen more than other shoes.

• PNF and Movement
• /
• v.20 no.3
• /
• pp.443-449
• /
• 2022

Purpose: This study aims to identify the differences in the muscle activity of the ankle joint muscle depending on the type of footwear (sneakers, mule sneakers, slippers) worn while walking on a slope. Methods: The subjects wore each shoe (sneakers, mule sneakers, and slippers) and walked on an 18-degree slope at a speed of 110 beats/min. While walking, the muscle activities of the tibialis anterior and medial gastrocnemius were measured. Of the three walking cycles, the second walking cycle was measured except for the first and third walking cycles, which are the beginning and end, and a three-minute break was taken to prevent muscle fatigue when the type of footwear was changed. Results: When walking on a slope, there was no significant difference in the muscle activity of the tibialis anterior according to the type of footwear. However, when walking on a slope, the difference in muscle medial gastrocnemius muscle activity was significant between sneakers and mule sneakers. There was also a significant difference between sneakers and slippers, but there was no significant difference between slippers and mule sneakers. Conclusion: There was no significant statistical difference between sneakers and mule sneakers, but there was a numerical difference. Therefore, the presence or absence of the shoe collar may affect the muscle activity of the medial gastrocnemius when walking on a slope. This can lead to patellofemoral pain syndrome caused by the excessive use of the quadriceps, so it must be considered that caution is needed.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.193-205
• /
• 2006

This study was to analysis the kinematic and kinetic differences between new walking shoe(NWS : RYN) and general walking shoe(GWS). The subjects for this study were 10 male adults who had the walking pattern of rearfoot shrike with normal foot. The movement of one lower leg was measured using plantar pressure and Vicon Motion Analysis Program(6 MX13 and 2 MX40 cameras : 100 f / s) while the subjects walked at the velocity(1.5m/s. on 2m).. The results of this study was as follows : 1. The NWS was better than the GWS that caused injuries such as adduction, abduction and pronation are reduced While walking on a perpendicular surface, the landing angle and the knees angles were extensive which makes walking more safe which reduces anxiety and uneasiness. 2. The bottom of the NWS were now made into a more circular arch which supports the weight of the body and reduces the irregular angles when wearing GWS. This arch made the supporting area more wide which made the upholding the trunk of the body more effective. The whole bottom of the foot that supports the weight is more flexible in addition, increases the safeness of walking patterns and the momentum of the body. 3. The moment the heel of the foot of the NWS touch the ground, the range of the pressure were partially notable and the range of the pressure on the upper part of the thigh were dispersed The injuries that occurred while walking. primary factors when a shock related injuries are reduced Judgements of the impacts of the knees and the spinal column dispersing could be made.