• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.7
• /
• pp.743-747
• /
• 2008

Hierarchical overlay of heterogeneous wireless cells is considered as a promising architecture for next-generation wireless networks. This paper considers a special form of such architecture, WWAN/WLAN two-hop wireless relay networks. We first describe an undesirable scheduling phenomenon that the conventional proportional fair algorithm can cause in such networks. We, then, propose an enhanced proportional fair scheduling to remedy this problem. We demonstrate the performance of the proposed scheme via a simulation of UMTS/WLAN networks using NS-2.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.6
• /
• pp.716-722
• /
• 2012

In this paper, we analyzed the RF interactions between WWAN antennas and an LCD driving module inside the cover of a notebook computer, and discussed reduction method of RF coupling. In order to simulate the RF noise source from the LCD driving module, a multi-band antenna was designed and used with a simplified notebook model to test the RF coupling phenomena. We verified that the RF noise coupling is enhanced at certain frequencies due to cavity structure formed inside the notebook computer. Also, we showed that conductive barrier walls, which are inserted inside the notebook, could be effective in reducing RF coupling.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10a
• /
• pp.167-168
• /
• 2007

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.475-483
• /
• 2013

In this paper, a coupled-fed monopole antenna for LTE/WWAN mobile handset applications is presented. The antenna consists of a monopole, a coupling strip, a feeding pad, a stub, and a shorting strip. The basic resonance of the monopole combines with the resonance formed by the coupling that occurs between the coupling strip and the feeding pad to include LTE700(698~787 MHz), GSM850(824~894 MHz), and GSM900(890~960 MHz) bands. The resonance of the stub combines with the harmonics of the monopole to include GSM1800(1,710~1,880 MHz), GSM1900(1,850~1,990 MHz), and UMTS(1,920~2,170 MHz) bands. Therefore, the proposed antenna is suitable as antenna for hexa-band mobile handset applications, covering LTE700, GSM850, GSM900, GSM1800, GSM1900, and UMTS bands. A stable and omni-directional radiation pattern with reasonable gains is observed within the operating bandwidth.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.940-946
• /
• 2010

In this paper, we proposed the internal antenna on PCB(Planar Circuit Board) for achieving WWAN(Wireless Wide Area Network) operation in the laptop computer. The proposed antenna has a metal structure instead of printed pattern on PCB to improve the antenna characteristics for GSM850/900 bands. Compared to PCB embedded antenna without metal structure, the proposed antenna occupies similar area of $74{\times}11{\times}0.5\;mm^3$ with before and the bandwidth of the proposed one for GSM850/900 bands is increased 13 MHz than before. Further we confirmed that the proposed antenna has higher radiation gain of -4.45~-2.29 dBi for GSM850/900 bands than PCB embedded antenna without metal structure.

• Journal of the Korea Society for Simulation
• /
• v.18 no.4
• /
• pp.165-173
• /
• 2009

Recent portable devices are so versatile that they have multiple communication channels and play several multimedia formats. Especially, many services are under development for users who connect Internet or nearby devices via WWAN (Wireless Wide Area Network) and/or WLAN (Wireless LAN). In case of paying the telecommunication cost proportional to the amount of data downloaded, it is necessary to reduce the cost by constructing a special ad hoc network in which each participating peer downloads a specific portion of the want-to-be-shared content over the payable WWAN channel and exchanges the remaining portion with other peers using the cost-free WLAN channel. If all peers participate in forwarding packets, some transmissions are redundant which results in the unnecessary consumption of bandwidth as well as the delayed content distribution time. In order to reduce the redundant transmission, this paper proposes both the excluding method which discourages some peers not to forward redundant packets, and the minimum cover set method in which only the minimum number of peers are in charge of forwarding packets. These two methods obviate redundant packet forwarding, and result in reduction of content distribution time by up to around 29%.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.1049-1052
• /
• 2006

차세대의 무선 네트워크 기술은 기존의 망을 통합하고 IP화 하는 방향으로 발전중이며, WWAN과 WLAN의 통합망에 관한 연구가 활발히 진행 중이다. 본 연구는 최근 상용화 서비스가 이루어지고 있는 WDMB 기술을 WWAN, WLAN과 강결합(Tight Coupling) 방식으로 통합한 네트워크 환경을 제안한다. 본 연구에서 제안하는 수직적 핸드오프(Vertical Handoff) 기법은 WLAN 인터페이스를 필요한 상황에만 구동하여 에너지 소모율을 낮춘다. 또한 WDMB 인터페이스를 상시 구동하여 데이터 트래픽이 발생할 때에 곧바로 WDMB 인터페이스를 통해 데이터 전송을 시작하여 전송률을 높인다. 또한 성능 평가를 통하여 단말에 장착된 모든 인터페이스를 구동하는 방식과 비교하여 에너지 소모율이 경감되었으며, 단말에 장착된 한 가지 인터페이스만을 구동하는 방식과의 비교를 통해 데이터 전송률이 크게 향상되었음을 보인다.

• Journal of Practical Engineering Education
• /
• v.13 no.2
• /
• pp.321-326
• /
• 2021

Wireless communication is a core technology constituting the Internet of Things (IoT), but there is no suitable educational equipment to learn various wireless communication technologies used in the Internet of Things through practice. This paper deals with the development of advanced education and training equipment that can perform various IoT wireless communication practices. It uses an Arduino mega board as a device to control various sensors. As wireless network technologies to send and receive the sensing date wirelessly, it makes use of RFID/NFC and Bluetooth among WPAN technologies, WiFi among WLAN technologies and LoRa and 2.4GHz wireless transceiver among WWAN technologies. In addition, GPS, infrared communication, I2C communication, and SPI communication are organized so that various IoT wireless communication technologies can be learned through practice. In addition, since the educational equipment developed in this paper is equipped with two devices, it is designed to perform transmission and reception experiments for wireless network technology within the equipment.

• Journal of Practical Engineering Education
• /
• v.15 no.3
• /
• pp.549-555
• /
• 2023

The representative technology of the WWAN wireless communication network used in the Internet of Things is LoRa communication technology, and LoRa communication uses the ISM band. The 920 MHz (920.9 MHz~923.3 MHz) band frequency, which is used as a domestic LoRa frequency, had a problem in performing LoRa network practice in the curriculum using a commercially available LoRa modules that have been used in Europe and the United States because of different frequency band, but a RYLR896 LoRa module was developed that allowed RF frequency to be programmed. With this module, this paper confirmed that the frequency can be set at a specified frequency in Korea using AT commands. In addition, using these RYLR896 LoRa modules, a LoRa network consisting of end nodes and gateways was constructed and practiced to confirm that development equipment capable of practicing the RYLR896 LoRa module and IoT was operating normally.

• 한국ITS학회:학술대회논문집
• /
• v.2007 no.10
• /
• pp.244-250
• /
• 2007