• Journal of the Korean Applied Science and Technology
• /
• v.22 no.4
• /
• pp.379-384
• /
• 2005

In general, water treatment sludge (WTS) had high concentration of heavy metal, thus it made the reuse or recycling of WTS difficult. The optimal solidification conditions for maximum suppression of heavy metal elution from WTS were decided in this study. Under the optimal solidification conditions (i.e., temperature, $320^{\circ}C;$ ratio of WTS and MgO, 9:1; solidification time, 1hr), all of heavy metal including aluminum were not detected. Therefore there are no problems for reuse or recycling of WTS which was solidified under the optimal solidification conditions found in the study.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.4
• /
• pp.382-385
• /
• 2006

To know the effect of water treatment sludge (WTS) as a rice seedling culture soil, rice seeds are sown, germinated and grown on the culture soils mixed with different ratios of WTS to sand (100:0, 50:50, 30:70, respectively), and their growth effects was compared to that of control, commercial culture soil. When WTS is used as a culture soil for rice, the length and weight of the top part of rice seedling somewhat decreased than those of control treatment while their root length and weight in all WTS treatments significantly increased. Although phosphorus and potassium uptake of rice seedling in WTS treatments was slightly decreased, WTS treatment showed to develop root growth which is necessary in the seedling stage of all plane. Such a stimulatory effect on root growth of rice seedling was significant in the mixture ratio of 50% WTS to 50% sand.

• Environmental Engineering Research
• /
• v.23 no.1
• /
• pp.92-98
• /
• 2018

Suitability of aluminium-based water treatment sludge (WTS), a waste product from water treatment facilities, was assessed for removal of heavy metals from an electroplating wastewater which had high concentrations of copper and chromium along with other heavy metals. Batch tests with simulated wastewater in single- and multi-metal solutions indicated the influence of initial pH and WTS dose on removal of six metals namely Cu(II), Co(II), Cr(VI), Hg(II), Pb(II) and Zn(II). In general, removal of cationic metals such as Pb(II), Cu(II) and Zn(II) increased with increase in pH while that of anionic Cr(VI) showed a reduction with increased pH values. Tests with multi-metal solution showed that the influence of competition was more pronounced at lower WTS dosages. Column test with diluted (100 times) real electroplating wastewater showed complete removal of copper up to 100 bed volumes while chromium removal ranged between 78-92%. Other metals which were present in lower concentrations were also effectively removed. Mass balance for copper and chromium showed that the WTS media had Cu(II) and Cr(VI) sorption capacities of about 1.7 and 3.5 mg/g of dried sludge, respectively. The study thus indicates that WTS has the potential to be used as a filtration/adsorption medium for removal of metals from metal-bearing wastewaters.

• Advances in environmental research
• /
• v.6 no.4
• /
• pp.281-299
• /
• 2017

Single (0.005 M DTPA), sequential (six-step) and kinetic (0.05 M EDTA) extractions were performed to assess Cd, Cr, Cu, Ni, Pb, and Zn mobilization and their potential ecological risks in Abuja (Nigeria) water (WTS) and wastewater (WWTS) treatment sludges. Total metal levels (mg/kg) in WTS and WWTS, respectively were: Cd(3.67 and 5.03), Cr(5.70 and 9.03), Cu(183.59 and 231.53), Ni(1.33 and 3.23), Pb(13.43 and 17.87), Zn(243.45 and 421.29). DTPA furnished metal extraction yields (%) in WTS and WWTS, respectively as: Cd(11 and 6), Cr (15 and 7), Cu(17 and 13), Ni(23 and 3), Pb(11 and 12), and Zn(37 and 33). The metals were associated with the soluble/exchangeable, carbonate, Mn/Fe-oxide, organic matter and residual forms to varying degrees. Kinetic extractions cumulatively leached metal concentrations akin to the mobilizable fractions extracted sequentially and the leaching data fitted well into the Elovich model. Metal mobilities were concordant for the three leaching procedures and varied in the order:WTS>WWTS. Calculated ecological risk indices suggested moderate and considerable metal toxicity in WTS and WWTS, respectively with Cd as the worst culprit. The findings may be useful in predicting heavy metals bioavailability and risks in the sludges to guide their disposal and use in land applications.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1196-1201
• /
• 2014

This paper presents an exploration on the effect of wind turbine contribution to the frequency control of individual systems that can be used for efficient power production in India. The research includes the study of Permanent Magnet Synchronous Generator (PMSG), in wind farms. The WTs are tested for inertia and for droop responses with intelligent fuzzy logic controllers (FLC) that choose Double Input Single Output (DISO) strategy that automatically sets gain constants, as well as combined responses for the WTs. Quantitative analyses are presented for the WTs for benefits and drawbacks including appropriate selection parameters. The analysis includes inertia, droop and combined inertia, droop schemes. The reconnaissance also incorporates inertia with FLC, droop with FLC, inertia and droop with FLC schemes for detailed study of WTs, so as to forecast and achieve proper frequency control. Moreover, the analysis provides the best suited method for frequency control in PMSG.

• Wind and Structures
• /
• v.20 no.1
• /
• pp.1-13
• /
• 2015

This study applied long-term wind speed data from Penghu and Dongjidao weather stations to simulate the wind energy production for eight onshore and one offshore wind farms at Penghu Island, Taiwan by a commercial software package, Wind Atlas Application Program (WAsP). In addition, the RET Screen software suite was also applied to analyze economic characteristics of these nine wind farms (WFs). The results show that the capacity factors (CFs) of the nine wind farms mentioned above are in the range of 44.5% to 49.1%. In addition, utilizing 1.8-MW wind turbines (WTs) for all onshore WFs was the most feasible selection among the four potential types of WTs (600, 900, 1,800 and 3,600 kW) considered. 3-MW WTs selected for the offshore WF can produce the most wind energy and the smallest wake loss among the three possible types of WTs (1, 2 and 3MW). As a consequence of implementing these WFs, the emission of about 680,977 tons carbon dioxide ($tCO_2$) into the local atmosphere in Penghu Island annually could be avoided. Finally, based on the payback periods achieved, the order of implementation of the considered WFs can be identified more clearly. Longmen WF should be the first priority, and the next one should be SiyuWF and so on. Besides, this study provides much useful information for WF planning on Penghu Island.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.1
• /
• pp.13-19
• /
• 2018

25 local districts in Seoul have been running Waste Transfer Stations(WTSs) to secure regional collection bases, to connect between collection systems and waste treatment systems, and to commit various pre-screening of mixed wastes. There were, however, few previous researches to define how much WTSs are beneficial to waste collection system at least in Korea. So this study analyzed costs of waste collection systems with varied haul distances from waste sources(WSs) to WTS or building types of WTSs. Major results showed that the closer WTS is to WS or the cheaper the construction cost of WTS is, the lower the cost of waste collection system is. There was an additional result that WTS system with more than 15 km of total haul distance might be useful in Seoul and encapsulation of WTS in building or underground will make effective total haul distances longer up to 35km.

• Korean Journal of Radiology
• /
• v.22 no.2
• /
• pp.243-252
• /
• 2021

Objective: To compare and correlate the findings of intravoxel incoherent motion (IVIM) magnetic resonance (MR) imaging and arterial spin labeling (ASL) imaging in characterizing parotid gland tumors. Materials and Methods: We retrospectively reviewed 56 patients with parotid gland tumors evaluated by MR imaging. The true diffusion coefficient (D), pseudo-diffusion coefficient (D^*), and fraction of perfusion (f) values of IVIM imaging and tumor-to-parotid gland signal intensity ratio (SIR) on ASL imaging were calculated. Spearman rank correlation coefficient, chi-squared, Mann-Whitney U, and Kruskal-Wallis tests with the post-hoc Dunn-Bonferroni method and receiver operating characteristic curve assessments were used for statistical analysis. Results: Malignant parotid gland tumors showed significantly lower D than benign tumors (p = 0.019). Within subgroup analyses, pleomorphic adenomas (PAs) showed significantly higher D than malignant tumors (MTs) and Warthin's tumors (WTs) (p < 0.001). The D^* of WTs was significantly higher than that of PAs (p = 0.031). The f and SIR on ASL imaging of WTs were significantly higher than those of MTs and PAs (p < 0.05). Significantly positive correlation was found between SIR on ASL imaging and f (r = 0.446, p = 0.001). In comparison with f, SIR on ASL imaging showed a higher area under curve (0.853 vs. 0.891) in discriminating MTs from WTs, although the difference was not significant (p = 0.720). Conclusion: IVIM and ASL imaging could help differentiate parotid gland tumors. SIR on ASL imaging showed a significantly positive correlation with f. ASL imaging might hold potential to improve the ability to discriminate MTs from WTs.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.4
• /
• pp.396-402
• /
• 2010

In this paper the principles and structure of a WTS (Wind Turbine Simulator) are described. The proposed WTS is a versatile system specially designed for the purpose of developing and testing new control strategies for wind energy conversion systems. The simulator includes two sub-systems; a torque controller which controls a 3-phase induction motor in order to simulate the wind turbine and wind speed generator which can simulate an actual wind speed. In order to make the proposed system working in real-time, two sub-systems are incorporated into one simulink block by using Real-time workshop. The performance of the proposed system is verified by considering various wind speeds.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.1
• /
• pp.73-83
• /
• 2021

Wind power energy harvesting has a big potential as a future clean energy resource, but accompanies infrasonic noises. The infrasound is difficult to shield and can induce various negative physiological effects. In this study, the Wind Turbine Syndrome (WTS) caused by the infrasonic noises are introduced, and the technical aspects for the measurement and management of the infrasonic noises from wind power plants are discussed.