• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.451-463
• /
• 2004

The performance of disk-type catalytic filters impregnated by TiO$_2$ or TiO$_2$-3Al$_2$O$_3$ㆍ 2SiO$_2$ supports and V$_2$O$_{5}$ catalyst was evaluated for selective catalytic reduction (SCR) of NO with ammonia as a reductant. XRD, FT -IR, BET and SEM were used to characterize the catalytic filters prepared in this work. Optimal V$_2$O$_{5}$ loading and reaction temperature for V$_2$O$_{5}$/TiO$_2$ catalytic filters were 3-6 wt.% and 350-40$0^{\circ}C$ at GHSV 14,300 $hr^{-1}$ in the presence of oxygen, respectively. With increasing the V$_2$O$_{5}$ loading from 0.5 to 6 wt%, NO conversion increased from 24 to 96% at 40$0^{\circ}C$ and 14.300$hr^{-1}$, and maintained at 80% over in the V$_2$O$_{5}$ loading range of 3-6 wt.% and then dropped at V$_2$O$_{5}$ loading of 7wt.% over. In comparing V$_2$O$_{5}$/ TiO$_2$ and V$_2$O$_{5}$/ TiO$_2$-3Al$_2$O$_3$ㆍ2SiO$_2$ catalytic fillers, which have same 3wt.% V$_2$O$_{5}$ loading, the V$_2$O$_{5}$/ TiO$_2$-3A1$_2$O$_3$ㆍ2SiO$_2$ catalytic filter showed higher activity than V$_2$O$_{5}$/ TiO$_2$ catalytic filter, but higher differential pressure drops owing to its low air permeability. low air permeability.

• Journal of Korea Foundry Society
• /
• v.13 no.4
• /
• pp.342-349
• /
• 1993

The purpose of this study is to obtain basic information on the particle dispersion, the coefficient of thermal expansion and the thermal conductivity of compocasted Al-xSi-2Cu-1Mg/ySiC(x:6, 12, 18. $y:0{\sim}10wt.%$) composite. With increasing the content of SiC particles, the thermal expension coefficient and the thermal conductivity decrease. The coefficient of thermal expension between 20 and $300^{\circ}C$ is $21.3{\times}10^{-6}/^{\circ}C{\sim}18.0{\times}10^{-6}/^{\circ}C$ for the Al-Si alloys and $18.4{\times}10^{-6}/^{\circ}C{\sim}16.0{\times}10^{-6}/^{\circ}C$ for the composite with 10wt.% SiC. The thermal conductivity at $300^{\circ}C$ is $121{\sim}169W{\cdot}m^{-1}{\cdot}k^{-1}$ for the Al-Si alloys and $114{\sim}159W{\cdot}m^{-1}{\cdot}k^{-1}$ for the composite with 10wt.% SiC.

• Food Science and Preservation
• /
• v.10 no.1
• /
• pp.65-69
• /
• 2003

This paper was performed to analyze the nutritional components for the basic of studies to estimate the nutritional and functional valuation of mushroom(Sarcodon aspratus) The contents of moisture, ash, crude protein, crude fat and carbohydrate in mushroom were 89.93, 1.18, 3.67. 0.96 and 4.26%, respectively. The major free sugar were glucose, sucrose, trehalose, xylose, and cantained more trehalose than other sugars. The total content of amino acids was 796.85mg/100g-fr.wt. And the contents of essential and non-essential amino acid of hydrolyzed amino acid was 300.77 and 486.08mg/100g-fr.wt, respectively. Mushroom contained mush valine, leucine, threonine, Iysine, alanine, glycine, aspartic acid, and glutamic acid. The contents of essential and non-essential amino acid of free amino acid was 124.95, 138.52mg/100g-fr.wt., respectively. and were cantained mush methionine, Iysine, valine arginine, Aspartic arid, and tyrosine. The content of Amino acid derivatives 46.81 mg/100g-fr.wt., and were contained mush mornithine, sarcosine, ${\beta}$-alanine, and phosphoserine. The content of vitamin C was 5.43 mg/100g-fr.wt. The contents of sodium and potassium were 375.73, 61.82mg/100g, respectively.

• Journal of Korea Foundry Society
• /
• v.25 no.3
• /
• pp.123-127
• /
• 2005

0.8wt.% C과 $0.75{\sim}3.2$(0.75, 1, 1.26, 1.44, 1.89, 2.1, 2.46, 2.94, 3.22)wt.% Si을 함유한 고탄소 고실리콘 강에서 Si의 함량이 미세조직과 processing window에 미치는 영향에 대해 조사하였다. 열처리는 $940^{\circ}C$에서 1시간 동안 오스테나이징을 실시한 후, $320^{\circ}C$에서 $0.2{\sim}300$분 동안 오스템퍼링을 하였다. 미세조직에서, 0.75 wt.% Si을 함유한 강에서 국부적으로 오스페라이트(ausferrite)가 존재하는 것을 확인하였다. Processing window는 경도 및 XRD 측정으로 결정하였다. $t_{1}$은 Si의 함량이 2.5 wt.% 이하에서는 거의 변화가 없다가,2.5 wt.% 이상에서는 감소하는 결과를 보였다. 반면, $t_{2}$는 Si의 함량이 증가함에 따라 연속적으로 증가하였다. 즉, 0.8 wt.% C을 함유한 강에서 processing window는 Si의 함량이 약 2.5 wt.%일 때 열렸다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.06a
• /
• pp.160-173
• /
• 1997

Microstructure of hypereutectic Al-17wt.% Si alloy, fabricated by mechanical stirring and by reheating at semi-solid state, was investigated by optical microscope. Flow behavior semi-solid metal also was investigated at diffentent mould temperatures 280$^{\circ}C$, 290$^{\circ}C$ and 300$^{\circ}C$. Size of silicon particles were increased over 100$\mu\textrm{m}$ during solidification as a result of stirring. It is considered as microstructural coarsening by bonding between neighbouring primary silion particles during stirring of slurry. In case of reheating at semi-solid state, however, primary silicon particle was not increased at size of 40$\mu\textrm{m}$ and nearly spherical aluminum solde particle also could be obtained uniformly in distribution. The fludity of Al-17wt.% Si alloys at semi-solid state was improved when solid fraction was 0.7 at mould temperature of 300$^{\circ}C$ than other conditions.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.97-98
• /
• 2007

DC magnetron sputtering법을 이용하여 다양한 $Al_2O_3:$ 함량비( 1, 2, 3 wt%)를 가진 고밀도 세라믹 타겟을 사용하여 기판온도 $RT{\sim}300^{\circ}C$에서 AZO박막을 제작하였다. $Al_2O_3:$함량 및 기판온도의 증가에 따라 AZO박막의 결정성은 향상됨을 확인할 수 있었다. 결과적으로 기판온도 $300^{\circ}C$에서 $Al_2O_3:$ 3 wt%를 함유한 AZO 타겟을 사용하여 증착한 AZO박막은 가시광 영역에서 85%이상의 높은 투과율과 $7.8{\times}10^{-4}{\Omega}cm$의 비저항 값을 나타내었다.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.200-200
• /
• 1996

간재생 및 만성 간질환모델에 대한 인진호 추출분획의 간장 약효검색 방법 1. 간세포 재생능력에 대한 효과 : SD계 수컷 흰쥐(체중 300-350g)를 마취하에서 복부정중선을 따라 개복후 간의 중앙엽 및 좌측엽을 절제하여 봉합하고 수술조작을 끝낸 추 4시간, 익일부터 7일간 오후 5시에 약물을 경구투여하고 마지막투여 후 20시간 절식, 부검하여 간재생률 및 BSP 정체율을 측정하였다. 2. $CCl_4$ 만성간장해 모델에 대한 효자 SD계 수컷 흰쥐(체중 200-250g)에 $CCl_4$ : olive oil 40%용액을 0.5 $m\ell$/kg b.wt. 용량으로 6일간 결구투여 한 후 7일째부터 매일 시험약물을 $CCl_4$ 혼합액 투여 4시간전 및 4시간후에 2회 경구투여하였으며 이 조작을 8일간 하고 마지막 투여 24시간 후에 부검하여 혈액내 ALT 및 AST치, 간조직내 total protein, triglyceride 및 hydroxyproline 양을 측정하였으며, 간중량도 측정하였다. 3. 약물투여 음성대조 : 1% CMC-Na 용액(10$m\ell$/kg b.wt.) 양성대조 : silymarin(25mg/kg), DDB(37.5mg/kg) 인진호추출분획 : KP(180mg/kg), PS-1(300mg/kg), PS-2(300mg/kg), EE (500mg/kg ), HH(640mg/kg), BE(1500mg/kg)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.725-728
• /
• 2001

We have fabricated thin films using the DC/RF magnetron sputtering of 74wt%Ni-l8wt%Cr-4wt%Al-4wt%Cu alloy target and studied the effect of the process parameters on the electrical properties for low TCR(Temperature Coefficient of Resistance) films. In sputtering process, pressure, power and substrate temperature, are varied as controllable parameter. The films are annealed to 400$^{\circ}C$ in air and nitrogen atmosphere. The sheet resistance, TCR of the films increases with increasing annealing temperature. It abruptly increased as annealing temperature increased over 300$^{\circ}C$ in air atmosphere. From XRD, it is found that these results are due to the existence of NiO on film surface formed by annealing. As a results of them, TCR can be controlled by variation of sputter process parameter and annealing of thin film.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.6
• /
• pp.322-325
• /
• 2012

Crystalline silica was synthesized by annealing amorphous silica at $1,300^{\circ}C$ or $1,400^{\circ}C$ for various times, and the crystallinity was estimated by X-ray diffraction (XRD) analysis. In order to prepare a low dielectric material, epoxy/crystalline silica composites were prepared, and the effect of silica content on the dielectric properties was studied under various functions of frequency and ambient temperature. The dielectric constant decreased with increasing crystalline silica content in the epoxy composites, and it also decreased with increasing frequency. At 120 Hz, the value of 5 wt% silica decreased by 0.25 compared to that of 40 wt% silica, and at 23 kHz, the value of 5 wt% silica decreased by 0.23 compared to that of 40 wt% silica. The value increased with increasing ambient temperature.

• Journal of Korea Foundry Society
• /
• v.24 no.5
• /
• pp.295-303
• /
• 2004

The effects of three minor elements, S, Ce and Bi, on the inoculation ability and fading behavior of 1.0 wt%Ba-Fe-Si were investigated through thermal analysis. The performance of 1.0 wt%Ba-Fe-Si inoculant was better and more consistant at the high temperature range of $1,450{\sim}1,500^{\circ}C$ than that of low one of $1,300{\sim}1,400^{\circ}C$. That was improved with individual addition of three minor elements. The optimum amount of addition was 1.0% of the weight of inoculant added, respectively. That was improved also by the simultaneous addition of two or three kinds of minor elements. Even though worse with the addition of two kinds of them simultaneously than with individual addition, that was improved with the simultaneous addition of all three kinds over that with the individual one.