• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.8
• /
• pp.1004-1010
• /
• 2019

In the EH-WSN (Energy harvesting wireless sensor network), a MAC (medium access control) protocol is required to select a relay node considering the power status of a node. Existing EH-WSN studies emphasize the power aspect, so it does not consider the QoS like the urgency of the sensed data. The required power and transmission delay must be changed according to the urgency so that the medium access control according to the data QoS can be performed. In case of relay node, relaying data without consideration of data urgency and node power may cause delay due to power shortage in case of urgent data. In this paper, we designed a MAC protocol that minimizes the power shortage that can occur during emergency data generation. For this, relay node requirements are set differently according to the urgency of data. The performance was analyzed through simulation. Simulation results show the reduced latency and improved reliability of urgent data transmission.

• Journal of Information Processing Systems
• /
• v.12 no.2
• /
• pp.275-294
• /
• 2016

A primary task in wireless sensor networks (WSNs) is data collection. The main objective of this task is to collect sensor readings from sensor fields at predetermined sinks using routing protocols without conducting network processing at intermediate nodes, which have been proved as being inefficient in many research studies using a static sink. The major drawback is that sensor nodes near a data sink are prone to dissipate more energy power than those far away due to their role as relay nodes. Recently, novel WSN architectures based on mobile sinks and mobile relay nodes, which are able to move inside the region of a deployed WSN, which has been developed in most research works related to mobile WSN mainly exploit mobility to reduce and balance energy consumption to enhance communication reliability among sensor nodes. Our main purpose in this paper is to propose a solution to the problem of deploying mobile data collectors for alleviating the high traffic load and resulting bottleneck in a sink's vicinity, which are caused by static approaches. For this reason, several WSNs based on mobile elements have been proposed. We studied two key issues in WSN mobility: the impact of the mobile element (sink or relay nodes) and the impact of the mobility model on WSN based on its performance expressed in terms of energy efficiency and reliability. We conducted an extensive set of simulation experiments. The results obtained reveal that the collection approach based on relay nodes and the mobility model based on stochastic perform better.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.3
• /
• pp.459-470
• /
• 2013

${\mu}TESLA$ is well known as the most representative energy-efficient broadcast authentication method. Until now, there are many researches that figure out the problems or limitation of ${\mu}TESLA$ and mitigate or solve them, but most researches have been verified in the environment far from the real world. We consider the necessity of verifying what the real efficiency of ${\mu}TESLA$ is. In this paper, we assume that sensors that continuously repeat hibernation and activity perform communication under the UWSN(Unattended WSN), which BS does not stay in the network. In this environment, we newly inspect the performance of ${\mu}TESLA$ by performing various simulations.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.6
• /
• pp.127-134
• /
• 2016

WBSN (Wireless Body Sensor Network), also called WBAN (Wireless Body Area Networks) generally, is a kind of WSN (Wireless Sensor Network) applications, which is composed of the various sensor nodes residing in human body embodied or in wearable way. The measured data at each sensor node in WBSN requires being synchronized at sink node for exact analysis for status of human body, which is like WSN. Although many time synchronization protocols for WSN has been already developed, they are not appropriate to WBSN. In this paper, a new time synchronization protocol for WBSN considering the characteristics of WBSN is proposed. The proposed scheme is not only simple, but also consumes less power, leading to increasing network life time. We will show that the proposed scheme is appropriate to WBSN by evaluating its performance by simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.856-859
• /
• 2010

WSN is composed of a lot of small sensors with the limited hardware resources. In WSN, at the initial stage, sensor nodes are randomly deployed over the region of interest, and self-configure the clustered networks by grouping a bunch of sensor nodes and selecting a cluster header among them. Specially, in Mobile-WSN environment, in which the administrator's intervention is restricted, the self-configuration capability is essential to establish a power-conservative Mobile-WSN which provides broad sensing coverage and communication coverage. In this paper, we propose a self-configuration routing protocol for Mobile-WSN, which consists of step-wise novel protocols for initial deployment, effective joining and removal of sensor nodes, which result in reducing overall power consumption, and extending the lifetime of network.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.125-134
• /
• 2009

Recently, as IT technology and the ubiquitous environment have diffused, the application of these techniques are being attempted in the field of traffic operations and management. Therefore, it is necessary to develop data collection systems and signal control strategies that are suitable in the ubiquitous environment and that will improve efficiency and safety of signalized intersections. The authors conducted a study on the Wireless Sensor Network (WSN) signal control strategy using a wireless communication network between individual vehicles and a signal-control system and full actuated signal control technique to propose a new signal control strategy in the ubiquitous environment. The WSN was defined to evaluate the algorithm used with PARAMICS API simulation. The simulation produced results that the WSN signal control is more effective than other signal control methods. The WSN signal control could reduce vehicle delay time to a maximum of 64% in comparison with other signal control methods in low and near saturation flow conditions.

• Journal of the Korea Society for Simulation
• /
• v.25 no.4
• /
• pp.43-52
• /
• 2016

Wireless sensor network (WSN) technology has been implemented using commercial off-the-shelf microcontrollers (MCUs), In this paper, we propose a simulation environment to realize the physical evaluation of FPGA-based node by considering vertically cross-layered WSN in terms of physical node device and network interconnection perspective. The proposed simulation framework emulates the physical FPGA-based sensor nodes to interoperate with the NS3 through the runtime infrastructure (RTI). For the emulation and interoperation of FPGA-based nodes, we extend a vendor-providing FPGA design tool from the host computer and a script to execute the interoperation procedures. The standalone NS-3 is also revised to perform interoperation through the RTI. To resolve the different time-advance mechanisms between the FPGA emulation and event-driven NS3 simulation, the pre-simulation technique is applied to the proposed environment. The proposed environment is applied to IEEE 802.15.4-based low-rate, wireless personal area network communication.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.156-162
• /
• 2020

Wireless Sensor Network (WSN) field is mainly studied to monitor and characterize large-scale physical environments to track various environmental or physical conditions, such as temperature, pressure, wind speed and humidity. WSN can be used in various applications such as wild surveillance, military target tracking and monitoring, dangerous environmental exploration and natural disaster relief. We design probabilistic mobile models that apply to mobile ad hoc network mobile environments. A probabilistic shift model proposed by dividing the number of moving nodes and the distance of travel into two categories to express node movement characteristics. The proposed model of movement through simulation was compared with the existing random movement model, ensuring that the width and variation rate of the first node node node node (FND) was stable regardless of the node movement rate. In addition, when the proposed mobile model is applied to the routing protocol, the superiority of network life can be verified from measured FND values. We overcame the limitations of the existing random movement model, showing excellent characteristics in terms of energy efficiency and stable in terms of changes in node movement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4760-4765
• /
• 2010

Time out-medium access control (T-MAC) protocol is one of the well-known MAC protocols designed for wireless sensor networks (WSN), and is proposed to enhance the poor performance of the S-MAC protocol. In this paper, we are reviewed about security vulnerability in T-MAC, and analyzed the power which is consumed at each stage of T-MAC protocol according to vulnerability of denial of service (DoS) and replay problem. From our analytical results, it can be considered the need of power efficient authentication scheme which provides the reliability, efficiency, and security for a general T-MAC communication. This is the case study of possible DoS vulnerability and its power consumption in T-MAC.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.2
• /
• pp.23-30
• /
• 2016

In this paper, for the pratical building envoronments, the propagation properties of the electromagnetic waves of the sub-1GHz bands, including the 447MHz, 868MHz, and 715MHz, and the 2.4GHz band are experimentally observed in therms of the received signal strength indicator (RSSI) value. The compasion of the frequency bands can be utilized to efficiently construct the wireless sensor networks (WSN) for the building automation control. In order to measure the RSSI values in the building, an RSSI measurement system is first designed, in which the master part can transmit data packets and measure the corresponding RSSI values, and the slave part can respond the received data packets. Using the measurement system, the RSSI values are then experimentally measured at four types of building enviroments. From the experimental result analysis, we could notice that the sub-1GHz, especially the 447MHz band, showd a good communication performance for the building environment and could provide an efficient WSN construction when the data rate is relatively low.