• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.6
• /
• pp.921-927
• /
• 2015

The aim of this study was to investigate the effect of die temperature and repeated extrusion on physical properties of extruded white ginseng (EWG). The die temperature was adjusted to 100, 120, and $140^{\circ}C$, and extrusion was repeated under the same conditions with their corresponding samples. Specific mechanical energy input decreased as die temperature increased during extrusions. The secondary extruded white ginseng (SEWG) at a die temperature of $120^{\circ}C$ showed a higher expansion index than other extrudates. Elevation of both die temperature and repeated extrusion increased the specific length of extrudates. The highest apparent elastic modulus, breaking strength, and water solubility index obtained from SEWG at a die temperature of $100^{\circ}C$ were $7.53{\times}10^8N/m^2$, $7.49{\times}10^5N/m^2$, and 39.02%, respectively. When die temperature increased, water absorption index (WAI) decreased. The WAI of SEWG was higher than that of EWG. In conclusion, repeated extrusion affected physical properties of white ginseng and could be applied to produce improved quality of ginseng products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.6
• /
• pp.912-920
• /
• 2015

The study was designed to investigate the effects of die temperature and $CO_2$ injection on the physical and antioxidant properties of extruded rice with tomato flour. Moisture content and screw speed were fixed at 25% and 150 rpm, respectively. Die temperatures and $CO_2$ injection were adjusted to 80, 110, and $140^{\circ}C$ and 0, and 300 mL/min, respectively. Specific mechanical energy input decreased as die temperature increased from 80 to $140^{\circ}C$. The expansion index increased, while bulk density decreased with $CO_2$ injection. All extrudates showed increased water soluble index (WSI) and water absorption index through the extrusion process. WSI increased as die temperature increased. 1,1-Diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging activity and total phenolic compounds increased as die temperature increased from 80 to $140^{\circ}C$. Total carotenoid and lycopene contents decreased through the extrusion process. Total carotenoid and lycopene contents upon 0 mL/min $CO_2$ injection and $140^{\circ}C$ die temperature were highest at $6.65{\mu}g/g$ and 2.69 mg/kg, respectively. In conclusion, $CO_2$ injection affects expansion properties while an increased die temperature leads to increased DPPH radical scavenging activity and total phenols.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.235-242
• /
• 2009

The purpose of this study is to establish fundamental research data for quality characteristics of Jochung by analyzing traditional manufacturing process. Two different processed rices (non-glutinous rices cooked by steaming and using an electronic rice cooker) were compared in terms of water solubility index (WSI), water absorption index (WAI), paste viscosity, reducing suger content, solid content, and dextrose equivalent over soaking time. Reducing sugar content increased for the soaked non-glutinous rice, steamed sample and microwaved sample. After 4 hr, the WSI decreased as the soaking time increased. However, there was no significant difference between WAI of the raw non-glutinous rice and the soaked non-glutinous rice. As soaking time increased, paste and breakdown viscosity increased significantly. Rice was prepared by soaking in water for 12 hr followed by the saccharification time (4, 8, or 12 h) for manufacturing Jochung. The solid content and reducing sugar content of the Jochung increased as the soaking time increased. Reducing sugar content and dextrose equivalent of Jochung from steamed rice (cooked hard) were higher than those from microwaved ones. The amount of reducing sugar and dextrose equivalent was highest in Jochung from steamed rice cooked hard (saccarification for 12 hr), with 59.40${\pm}$0.11% and 76.99${\pm}$1.78, respectively. In conclusion, the highest quality characteristics were obtained in Jochung manufactured with non-glutinous rice soaked for 12 hr followed by sacharification for 12 hr.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.11
• /
• pp.1451-1457
• /
• 2007

The physical and chemical characteristics of powders from hot air and freeze dried leaves and roots of Acorous calamus L. were investigated. Two parts, upper and lower, of leaves, and two kinds of roots, 4 and 6 years old, were dried at 30 and $40^{\circ}C$, freeze-dried, and ground to make powder. Contents of moisture, ash, crude fat, and crude protein in freeze dried powder of upper leaf were 4.87%, 6.73%, 2.22%, and 3.57%, respectively. Water absorption index (WAI) and water solubility index (WSI) in freeze dried powder of lower and upper leaves were 8.476 and 0.077 g/mL. Contents of chlorophyll a, chlorophyll b and total chlorophyll in freeze dried powder of upper leaves were 12.18, 16.86, and 29.11 mg/100 g, respectively. Contents of total and reducing sugar in freeze dried powder of 4 and 6 years roots were $111.89{\sim}119.21$ ppm and $5.02{\sim}5.22$ ppm, $109.92{\sim}114.65$ ppm and $5.21{\sim}5.32ppm$. Contents of total polyphenols and flavonoids in freeze dried powder of upper leaf were 125.02 and $21.02{\mu}g/mg$, respectively.

• Journal of Korea Water Resources Association
• /
• v.45 no.11
• /
• pp.1143-1156
• /
• 2012

One of the important purposes of most water resources systems is to prevent from drought damages. However, there are uncertainties in water supply plans from a reservoir due to factors such as limitation of available data, inaccuracy of surveyed data, unsuitability of analysis method, and climate change. In actual operating process, severe drought exceeding the water supply capability makes the normal water usage difficult. In Korea, however, alternative water source such as a development of new water project is very limited in case of water shortages due to drought. Especially, since there is no standard to evaluate the water supply effect considering severe drought damages, it is difficult to prepare the practical measures. In this study, water shortage events of existing multipurpose reservoirs are analyzed and the method of using low-storage emergency water supply is studied by using Water Shortage Index (WSI). The water shortage events are analyzed and the effect of water shortage decrease is evaluated using the existing inflow data of multi-purpose reservoirs. The results show that Imha, Daechung, Hapchon and Namkang reservoirs are highly vulnerable to the severe drought and required to develop additional emergency water source.

• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.88-92
• /
• 1991

To analyze the effects of the system parameters on the target parameters, which include the amount of water evaporation, water solubility index(WSI) and water absorption index(WAI), test trials of fractional factorial design of the three process variables at three levels were carried out for corn grit with a laboratory twin-screw extruder with three different screw configurations. The system parameters collected from the trials, such as extrusion temperature, specific mechanical energy input(SME) and mean residence time(RT), were showed the ranges of $129{\sim}182^{\circ}C$, $67{\sim}163\;kwh/ton$ and $12{\sim}34\;sec$, respectively. Within these ranges of the system parameters, the target parameters were able to be quantified by using multiple regression equations. The correlation of results with the system parameters blocked by the screw configuration as dependent variables, yield correlation coefficients above 0.90, and the correlation using the system parameters obtained from whole experiment system as the dependent variables yield correlation coefficients around 0.80. The functional relationship, which can be quantified by second order polynomial regression equation with only two system parameters within necessary degree of accuracy, can he graped in three dimensional surface response and contour diagrams.

• Food Science and Preservation
• /
• v.22 no.4
• /
• pp.591-597
• /
• 2015

In this study, extracts of chlorella using different extraction methods were compared for antioxidant activities and spray-dried chlorella powders were investigated for their physicochemical characteristics. The DPPH radical scavenging activity and superoxide radical scavenging activity of 50% ethanol extract were 29.19%, and 48.91%, respectively. The oxygen radical absorbance capacity (ORAC) of the 50% ethanol extract ($150.44{\mu}M/g$) was higher than those of other extracts. The total chlorophyll content of the 50% ethanol extract (542.89 mg/100 g) was higher than those of other extracts. The microencapsulation of the 50% ethanol extract was manufactured by spray-drying with 10 % maltodextrin (SD-C10), 20% maltodextrin (SD-C20), and 30% maltodextrin (SD-C30). The particle size of the freeze-dried powder ($454.47{\mu}m$) was higher than those of the spray-dried powders ($24.15{\sim}32.49{\mu}m$). Scanning electron microscope images showed that the spray-dried chlorella powders using SD-C10, SD-C20, and SD-C30 had an uniform particle distribution. The water absorption index and water solubility index (WSI) of powders were 0.31~0.45, and 96.96~98.28%, respectively. The spray-dried powders showed the stability in total chlorophyll content for 40 days storage. Based on these results, spray-dried chlorella powders could be used in various types of food processes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.9
• /
• pp.1407-1414
• /
• 2014

Physicochemical properties of rice-based expanded snacks extruded with rice flour, high amylose starch, and isolated soy protein were investigated using a twin-screw extruder. The ingredients were extruded at various feed moisture contents (19~23%) and screw speeds (200~400 rpm) at a constant feed rate (43.4 kg/hr). Bulk density and apparent density of rice snacks were 0.06~0.21, and 0.55~0.65 respectively. Bulk density, apparent density, water absorption index, and breaking strength of rice snacks increased with increasing feed moisture content and decreasing screw speed. However, expansion and water solubility index of rice snacks increased with decreasing feed moisture content and increasing screw speed. Hunter's color L values of rice snacks was lower with increasing screw speed at feed moisture contents of 19% and 21%, but was not significantly different from a feed moisture content of 23%. On the other hand, a and b values of rice snacks were higher with increasing screw speed a feed moisture content of 19%. X-ray diffraction intensity of rice snacks decreased with decreasing feed moisture content and increasing screw speed. X-ray diffraction of rice snacks was V-type at feed moisture contents of 19% and 21% and screw speeds of 300, and 400 rpm. In the microstructure of the cross section of rice snacks, air cells in rice snacks were not well formed, and cell walls were thicker with increasing feed moisture content and decreasing screw speed.

• Korean Journal of Food Science and Technology
• /
• v.27 no.2
• /
• pp.251-256
• /
• 1995

Sucrose is added to feed materials to alter the taste and texture of extruded products. Emulsifier can affect extrudate properties by forming complexes with amylose during extrusion-cooking. These ingredients may improve the cell structure and texture of cornmeal extrudates obtained by using $CO_{2}$ as a bubble forming agent. The objective of this study was to evaluate effects of sucrose (5% and 10%) and glyceryl monostearate (GMS) (0.75% and 1%) on properties of cornmeal extrudates produced with $CO_{2}$ at injection pressures from 1.04 to 2.07 MPa. Dough temperature increased and die pressure decreased when $CO_{2}$ was injected into barrel. The addition of sucrose to cornmeal resulted in decreasing dough temperature, specific mechanical energy (SME) input, and die pressure. SME input was not significantly influenced by GMS addition but die pressure was decreased when GMS was added. Extrudate density was decreased over observed $CO_{2}$ injection compared to GMS. WSI was significantly decreased with the addition of GMS. Paste viscosity was also decreased with addition of sucrose or GMS, but significant differences of paste viscosity among $CO_{2}$ injection pressures were not found. Stucture forming and texture of cornmeal extrudates by $CO_{2}$ injection was improved by adding GMS.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1078-1083
• /
• 1996

During the pearling process of hull-less barley, protein, lipid, ash and insoluble dietary fiber (IDF) contents decreased, while soluble dietary fiber (SDF) and ${\beta}-glucan$ contents slightly increased. Depending on milling methods and types of grinding mills used, there were differences in particle size distribution of barley flour. Flour particle size was smaller in the following order of Fitz mill, Ball mill, Pin mill, Cyclotec sample mill and Jet mill. Color (brightness) was closely related to the particle size of barley flour. Damaged starch (%) in pearled barley flour was the highest in Jet mill among different mills. Flours prepared with Cyclone mill and Pin mill had a reasonable amount of damaged starch. Flour produced by Fitz mill showed the lowest amount of damaged starch. Scanning electron microscopy (SEM) of the flour samples demonstrated different sizes and shapes of particles consisting of starch granules and cell wall materials. Damaged starch tended to increase water absorption index (WAI), water solubility index (WSI), and water retention capacity (WRC). Pasting viscosity determined by amylograph was relatively high in Pin-milled and Cyclone-milled flours. Viscosity was the lowest in coarsely ground flour by Fits mill.