• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.623-632
• /
• 2018

본 논문은 최적설계기법을 적용하여 Cross-WLF 모델의 계수 값을 효과적으로 추정하는 것이다. 사출성형 공정의 해석에서 주로 사용되는 Cross-WLF 점도 모델은 온도와 전단율의 영향이 민감한 고분자의 유변학적 특성을 잘 모사하는 모델로 널리 사용되고 있다. 정확한 폴리머 유변학적 특성 예측을 위해서는 정확한 Cross-WLF 계수 값의 추정은 필수이다. 실험적으로 획득한 데이터의 점도 값과 Cross-WLF의 계수 값을 설계변수로 가정하여 계산한 점도 값이 일치한다면, 최적화 기법을 통해 정의된 Cross-WLF모델이 실험 데이터를 정확하게 모사하는 것이라 할 수 있다. 이러한 Cross-WLF 모델을 통해 계산된 점도와 실험 데이터의 차이를 최소화하는 목적함수로 Cross-WLF의 계수 값을 설계변수로 정의하여 연구를 수행하였다. 본 논문에서 제시한 최적화기법의 타당성으로 확인하기 위하여 몇개의 소재를 대상으로 하여 Moldflow에서 제공하는 Cross-WLF 계수 값과 본 논문에서 제안한 방법으로 획득한 계수 값를 비교하여 잘 일치함을 확인하였다. 또한, Moldflow Plastic Lab의 실제 측정 데이터를 활용하여 추정한 결과 제안한 방법의 효율성 및 타당성을 입증하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.28-31
• /
• 2002

The water level fluctuation (WLF) method is a conventional method for quantifying groundwater recharge by multiplying the specific yield to the water level rise. A 2-D unconfined flow model with a time series of the recharge rate is developed. It is used for elucidating the errors of the WLF method which is implicitly based on the tank model where the horizontal flow in the saturated zone is ignored. Simulations show that the recharge estimated by the WLF method is underestimated for the observation well near the discharge boundary. This is due to the fact that the hydraulic stress resulting from the recharge is rapidly dissipating by the horizontal flow near the discharge boundary Simulations also reveal that the recharge was significantly underestimated with increase in the hydraulic conductivity and the recharge duration, and decrease in the specific yield.

• Elastomers and Composites
• /
• 제41권1호
• /
• pp.40-48
• /
• 2006

고무는 금속 및 플라스틱 재료와 달리 작은 하중에서도 큰 변형이 발생되며, 높은 변형 구간에서 탄성특성을 보이는 특징이 있다. 특히 충격흡수 특성이 금속 및 플라스틱보다 우수하므로 제진 및 충격 완충구조물로 널리 활용되고 있다. 충격하중을 받는 고무 구조물의 특성을 평가하기 위하여 자유 낙하형 충격시험기를 이용하여 충격실험을 실시하였으며, ABAQUS/Explicit를 이용하여 유한요소 해석을 수행하였다. 고무의 동강성은 충격펄스의 최대변형량과 충격지속시간으로부터 얻어진 진폭과 주파수를 적용하여 동특성 시험을 수행하고 WLF모델을 적용하여 높은 주파수 대역의 동강성을 예측하였다. 실험을 실시한 $0.3{\sim}l.5J$의 충격에너지 영역에서는 고무의 경도가 증가되면 충격흡수율이 감소되며, 충격에너지가 커질수록 충격흡수율은 감소하는 경향을 나타내었다.

• Tribology and Lubricants
• /
• 제14권1호
• /
• pp.85-93
• /
• 1998

The Bair & Winer's limiting shear stress rheological model is incorporated into the Reynolds equation to successfully predict the traction and film thickness for an isothermal line contact using the primary rheological properties. The modified WLF viscosity model and Barus viscosity model are also adapted for the realistic prediction of EHD tractional behavior. The influences of the limiting shear stress and slide-roll ratio on the pressure spike, film thickness, distribution of shear stress and nonlinear variation of traction are examined. A good agreement between the disc machine experiments and numerical traction prediction has been established. The film thickness due to non-Newtonian effects does not deviate significantly from the fdm thicknesss with Newtonian lubricant.

• 소성∙가공
• /
• 제9권2호
• /
• pp.103-111
• /
• 2000

It is necessary to improve mechanical and optical properties in the optical disk substrates as the information storage density using short wavelength laser are being developed. The birefringence distribution is regarded as one of the most important optical properties for optical disk. In the present study, the birefringence distrubution is calculated using the Leonov model for viscoelastic constitutive equations and Cross/WLF model for viscosity approximation. The effects of processing conditions upon the development of birefringence discosity approximation. The effects of processing conditions upon the development of birefringence distribution in the optical disk were examined theoretically. It was found that the values of the birefringence distributions were very sensitive to the mold wall temperature history which minimizes the birefringence distribution. The analytical results showed the possibility of improving mechanical and optical properties in the optical disk substrates by active control of the mold wall temperature history.

• 한국식품과학회지
• /
• 제24권2호
• /
• pp.165-170
• /
• 1992

호화된 쌀 전분 젤의 creep 거동을 농도($30{\sim}45%$)와 온도($20{\sim}85^{\circ}C$)를 달리하여 측정하였으며 전분 젤의 점탄성에 미치는 온도와 농도의 영향은 shift factor($a_{T},\;a_{C}$)를 이용하여 분석하였다. Compression creep test의 결과 쌀 전분 젤은 순간변형 부분, 지연탄성 부분 및 유동부분으로 구성된 6-element의 역학적 모델로 해석할 수 있었으며 점탄성 거동은 순간변형 부분이 주체를 이루었다. 전분 농도가 $30{\sim}45%$로 증가함에 따라 creep compliance는 감소하였고 농도 증가는 주로 순간변형 부분에 영향을 미쳤다. 각 농도에서의 total compliance는 shift factor($a_{C}$)를 이용하여 일정한 기준농도(38%)로 변환시켜 농도불변 곡선으로 정확히 나타낼 수 있었다. 온도를 $20{\sim}85^{\circ}C$로 조절하여 얻은 creep compliance는 온도의 증가에 따라 증가하여 젤의 조직이 점점 연화되었다. $20^{\circ}C$를 기준온도로 shift factor($a_{T}$)에 의해 각 온토에서의 단편적 total compliance 곡선을 log(t)에 대해 수평이동시키면 전반적으로 부드럽게 연결되는 master curve를 얻을 수 있었으므로 시간-온도 환산법칙이 잘 성립되었다. 수정된 WLF식을 이용하여 $a_{T}$의 온도 의존성을 분석한 결과 전분 젤의 활성화에너지는 일정하지 않고 온도의 증가에 따라 감소하였으며, 공유결합에 의해 망상구조를 이루는 다른 젤들에 비해 그 값이 상대적으로 작았다.

• Coupled systems mechanics
• /
• 제7권5호
• /
• pp.509-524
• /
• 2018

A hierarchical multi-scale modeling strategy devoted to the study of a Bitumen-Bound Gravel (BBG) is presented in this paper. More precisely, the paper investigates the temperature-dependent linear viscoelastic of the material when submitted to low deformations levels and moderate number of cycles. In such a hierarchical approach, 3D digital Representative Elementary Volumes are built and the outcomes at a scale (here, the sub-mesoscale) are used as input data at the next higher scale (here, the mesoscale). The viscoelastic behavior of the bituminous phases at each scale is taken into account by means of a generalized Maxwell model: the bulk part of the behavior is separated from the deviatoric one and bulk and shear moduli are expanded into Prony series. Furthermore, the viscoelastic phases are considered to be thermorheologically simple: time and temperature are not independent. This behavior is reproduced by the Williams-Landel-Ferry law. By means of the FE simulations of stress relaxation tests, the parameters of the various features of this temperature-dependent viscoelastic behavior are identified.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권9호
• /
• pp.229-239
• /
• 2020

This paper examines the impact of gender on access to debt finance among Vietnamese enterprises. The paper investigates data and variables retrieved from the World Bank Enterprise Survey dataset using five Probit models. The regression results suggest that there exist more unfavourable debt financing conditions for women-led firms (WLF), measured as a lower probability of having loan applications fully approved. Firm's age, working sector, and perception of access to finance as a difficulty are found to have explanatory power on the discrimination. More importantly, the perception of debt finance as a difficulty or firms' level of confidence significantly explains the variance of the dependent variable of probability of loan approval, or gender effect would be more pronounced if the firm already has a low level of confidence. The paper also contributes in testing for the gender effect on Vietnamese enterprises from different sectors and scale, unlike other prior research papers focusing on specific sectors and/or small and medium enterprises only. The findings are highly useful for Vietnamese credit institutions to set out a specific business policy to attract more WLFs and help promoting gender equality in the working environment, especially in debt financing, which is often neglected in existing regulation and policy frameworks.

• 한국정밀공학회지
• /
• 제18권12호
• /
• pp.60-65
• /
• 2001

To simulate the real molding conditions, the effects of phase change and compressibility of the resin were considered in the present investigation. A modified Cross model with either an Arrhenius-type or WLF-type functional form was used for modeling viscosity of the resin. A double-domain Tait equation of state was employed to describe the compressibility of the resin during molding. The energy balance equation including latent-heat dissipation fur semi-crystalline materials was solved in order to predict the solidified layer and temperature profile. Injection molding experiments were carried out using polypropylene(PP) in the present study. Based on the comparison between experiments and simulations, it was found out the predicted pressure distributions and melt front propagations were accurate. Thus it was concluded that the program developed in this study was proved to be useful in simulations of injection molding process.