• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.185-191
• /
• 2008

Most threats of WLAN are easily caused by attackers who access to the radio link between STA and AP, which involves some Problems to intercept network communications or inject additional messages into them. In comparison with wired LAN, severity of wireless LAN against threats is bigger than the other networks. To make up for the vulnerability of wireless LAN, it needs to use the Intrusion Detection System using a powerful intrusion detection method as SVM. However, due to classification based on calculating values after having expressed input data in vector space by SVM, continuous data type can not be used as any input data. In this paper, therefore, we design the IDS system for WLAN by tuning with SVM and data-mining mechanism to defend the vulnerability on certain WLAN and then we demonstrate the superiority of our method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1053-1059
• /
• 2011

DMX512 protocol is a typical protocol which controls LED lighting system. It has a strong feature and can be used to a lot of lighting system. But LED control system with cable has a few problem because they have a lot of control cables. It is very difficult to set up the complex lighting. Furthermore if it is set up it is not easy to keep and recover the system from the out of order. So it is required Wireless Lighting Control System. This paper describes the proposal, design, and implementation of a novel method which can provide versatile light effects with the increased capability of the mobility and the number of universes for Wireless Lighting system. And then we implement experiment environment to control indoor lighting system controled by ZigBee and WLAN converter not having complicating control line. Data frames are transferred to DMX512 device by encapsulation and decapsulation to control color LED. In the same time give the method to solve the data bottleneck problem which can be comes out because of speed difference between Heterogeneous network and measure performance of control system.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.116-120
• /
• 2008

The conventional channel selection method for a ZigBee communication network basically detects the energy values in all channels. In the ISM band, no license is required to use channels in this band, so there may exist various interference factors in this band. It is well known that WLAN is the major interference factor degrading the performance of ZigBee in the ISM band. In this paper, we propose an efficient channel selection algorithm which uses the pattern of WLAN channel uses as the a priori information. By using the proposed algorithm, we may save the time required to select channels for the ZigBee communications.

• Journal of Practical Engineering Education
• /
• v.13 no.2
• /
• pp.321-326
• /
• 2021

Wireless communication is a core technology constituting the Internet of Things (IoT), but there is no suitable educational equipment to learn various wireless communication technologies used in the Internet of Things through practice. This paper deals with the development of advanced education and training equipment that can perform various IoT wireless communication practices. It uses an Arduino mega board as a device to control various sensors. As wireless network technologies to send and receive the sensing date wirelessly, it makes use of RFID/NFC and Bluetooth among WPAN technologies, WiFi among WLAN technologies and LoRa and 2.4GHz wireless transceiver among WWAN technologies. In addition, GPS, infrared communication, I2C communication, and SPI communication are organized so that various IoT wireless communication technologies can be learned through practice. In addition, since the educational equipment developed in this paper is equipped with two devices, it is designed to perform transmission and reception experiments for wireless network technology within the equipment.

• Journal of Internet Computing and Services
• /
• v.22 no.6
• /
• pp.91-97
• /
• 2021

The United States is responding to evolving cyberattacks through the Commercial Solutions for Classified Program (CSfC). Authorized safety evaluation and certification are being carried out so that US government agencies can quickly introduce civilian commercial security products into the national pavilion. Commercial security products registered in the CSfC process can be used by defense agencies through a rapid approval process. Defense agencies approve commercial security products without duplicate evaluation. Approved security products can reduce the time, cost, and cost of the approval process required to implement the defense information system. In this study, security control for 4 types of network security architecture MSC (Multi-Site Connectivity), MA (Mobile Access), Campus WLAN, and DAR (Data at Rest) proposed by the US National Security Agency (NSA) for introduction to national defense A detailed analysis was performed on the items.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.465-465
• /
• 2006

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.261-261
• /
• 2004

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.6
• /
• pp.1098-1115
• /
• 2010

An inseparable challenge associated with every random access network is the design of an efficient Collision Resolution Algorithm (CRA), since collisions cannot be completely avoided in such network. To maximize the collision resolution efficiency of a popular CRA, namely Binary Exponential Backoff (BEB), we propose a reactive backoff algorithm. The proposed backoff algorithm is reactive in the sense that it updates the contention window based on the previously selected backoff value in the failed contention stage to avoid a typical type of collision, referred as cross-collision. Cross-collision would occur if the contention slot pointed by the currently selected backoff value appeared to be present in the overlapped portion of the adjacent (the previous and the current) windows. The proposed reactive algorithm contributes to significant performance improvements in the network since it offers a supplementary feature of Cross Collision Exclusion (XCE) and also retains the legacy collision mitigation features. We formulate a Markovian model to emulate the characteristics of the proposed algorithm. Based on the solution of the model, we then estimate the throughput and delay performances of WLAN following the signaling mechanisms of the Distributed Coordination Function (DCF) considering IEEE 802.11b system parameters. We validate the accuracy of the analytical performance estimation framework by comparing the analytically obtained results with the results that we obtain from the simulation experiments performed in ns-2. Through the rigorous analysis, based on the validated model, we show that the proposed reactive cross collision exclusionary backoff algorithm significantly enhances the throughput and reduces the average packet delay in the network.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.7
• /
• pp.33-40
• /
• 2010

The hand over between different radio access networks, especially where their coverage overlaps, suffers various complications since the different access networks provide different service characteristics. In this paper, it is about the system which can control the wireless LAN network management system and the wireless LAN access point of variety vendor which is in different areas. Successful development of mobile sink wireless LAN network management system which supports multi-vendor devices and have center-local interoperability structure. In proposed system, speed of the mobile station give about 10% improvement when the map domain size is 5 than the existing system. Through a data plane and management system of message way, it give a stability system and consistency network.

• Information and Communications Magazine
• /
• v.24 no.7
• /
• pp.79-88
• /
• 2007

본고에서는 현재 일반적으로 가장 널리 사용되고 있는 네트워크 시뮬레이터인 NS-2(Network Simulator-2)에 대하여 알아본다. NS-2는 네트워킹의 성능분석을 목적으로 개발된 이벤트 기반(event-driven)의 시뮬레이터이다. 이 시뮬레이터의 적용 범위는 유선 네트워크의 경우 TCP/IP 프로토콜 패밀리와 각종 라우팅 프로토콜에 대한 시뮬레이션이 가능하며, 무선 네트워크에 경우에는 Ad Hoc 네트워크, WLAN, Mobile-IP와 Cellular network 등의 시뮬레이션이 가능하다. GUI가 부족하고 사용이 어렵다는 단점에도 불구하고, 공개된 소스와 두터운 이용자층에 힘입어 널리 사용되는 NS-2의 개요 및 시뮬레이션 방법에 대해 알아보기로 한다.