• 한국해양공학회지
• /
• 제9권2호
• /
• pp.75-82
• /
• 1995

The free surface effects on the aerodynamic performance of 2-D wings are investigated based on the potential flow approximation. The wing is represented b source and vortex distributions on the wing surface. The steady free surface effect is taken into account by source distribution on the free surface and the velocity potentials of air and water flows are obtained. Using three different techniques, namely, positive image method, inverse image method and source distribution method, numerical results are obtained for wave elevation, pressure distribution and lift coefficient with various foil sections. The wave elevation calculated by the inverse image method is shown to be very small even at higher speeds so that the free surface effect on the performance of wings is regraded negligible. However, the wave elevations by the positive image method and source distribution method are relatively high at higher speeds and accordingly the free surface effects on wings can not be neglected.

• Journal of Ship and Ocean Technology
• /
• 제11권3호
• /
• pp.39-50
• /
• 2007

This study aims the observation of wing-in-ground effect near free surface. Numerical computations are carried out to observe the deformation of free surface and the effects on lift and drag. The detailed flow fields around two- and three-dimensional wings with NACA 0012 section are observed from the results of a commercial CFD program, FLUENT, and the local deformations of free surface are obtained by applying a Rankine panel method. In the present cases, the small deformation of free surface under the wings is observed, but different forces are found between solid wall and free surface when the speed of wings becomes large.

• 한국해양공학회지
• /
• 제11권1호
• /
• pp.55-64
• /
• 1997

A wing operating in close proximity to the ground exhibits a reduction in induced drag, which increase the lift/drag ratio. The poert-augmented ram (RAR) phenomenon involves directiing the efflux from forward mounted propulsion ststem under the wings, with the efflux nearly stagnated under the wings. In the present paper, 3 dimentional PAR was numerically studied by solving the Navier-Stokes equations. Pressure distribution and velocity vectors are calculated around the wing surface and the ground. Through the numerical simulation, Cp values and lift/drag ratio are carefully reviewed by changing the height/chord; 0.05, 0.1, 0.3 and 0.8. The shape of model is NACA 0012 with a span/chord ratio of 3.0. According to the numerical results, the relationship between lift/drag and height/chord is fairly reasonable.

• Journal of Ship and Ocean Technology
• /
• 제12권3호
• /
• pp.14-25
• /
• 2008

Recently, there has been a serious effort to design a wing in ground effect (WIG) craft. Vehicles of this type might use low aspect ratio wings defined as those with smaller than 3. Design and prediction techniques for fixed wings of relatively large aspect ratio are reasonably well developed. However, Aerodynamic problems related to vortex lift on wings of low aspect ratio have made it difficult to use existing techniques. In this work, we firstly focus on understanding aerodynamic characteristics of low aspect ratio wings and comparing the results from experimental measurements and currently available numerical predictions for both inviscid and viscous flows. Second, we apply an improved numerical method, "B-spline based high panel method with wake roll-up modeling", to the same problem.

• Composites Research
• /
• 제23권1호
• /
• pp.44-50
• /
• 2010

본 연구에서는 염수 침수 실험과 염수 분무 실험이라는 두 가지의 실험을 위그선의 구조재료로 사용될 3가지 다른 복합재료 시스템에 대해서 해수와의 접촉에 의한 물성저하를재현하기 위해 수행하였다. 140일간 염수환경하에서 노화시킨 후 탄소섬유 복합재료와유리섬유 복합재료의 인장, 압축, 전단 강성과 강도 및 층간 전단 강도를 측정하였다. 기본 물성파의 비교를 통해서 염수환경이 복합재료의 기계적 물성에 미치는 영향이 평가되었다. 실험을 통해 염수 분무환경과 침수 환경의 차이는 거의 영향을 미치지 않음을 확인하였다. 탄소섬유 복합재료의 경우 인장 물성에 적은 손실이 발생한 반면 유리섬유 복합재료에서는 인장물성의 저하률이 탄소섬유 복합재료에 비해서 큼을 확인하였다. 그리고 모재 지배적 물성들의 큰 물성저하가 관찰되었다. 이를 통해, 염수는 복합재료의 섬유와 모재 사이의 계면을 퇴화시키고, 또한 모재 자체 물성과 유리섬유의 물성을 저하시킬 수 있음을 확인하였다.

• 해양환경안전학회지
• /
• 제19권5호
• /
• pp.491-496
• /
• 2013

수면비행선박의 지위가 국제해사기구(IMO)에서 선박으로 분류하는 것으로 결론지은 이후, 국내외적으로는 몇몇 규칙과 권고 사항들이 개정 및 승인되었다. 하지만 정작 수면비행선박의 종류 및 운항특성을 고려한 항법에 관해서는 규정이 미비하고, 수면비행선박간 항법에 관련해서는 규정이 되어 있지 않다. 이러한 상황에서, 현행 법령상에 다른 선박들과 수면비행선박간의 책임 관계를 명확히 하기 위하여 서로 시계에 항법상의 수면비행선박 관련 규정을 모든 시계로의 항법상으로 이동할 것과 수면비행선박간 안전통항을 확보하기 위하여 타입 'B'와 'C'의 수면비행선박이 타입 'A'의 수면비행선박을 피항해야 한다는 규정이 신설되어야 한다고 판단된다.

• 대한조선학회지
• /
• 제32권5호
• /
• pp.19-26
• /
• 1995

표면효과익선(WIG : Wing-In-Ground Effect Ship)은 해면 위를 낮게 비행함으로써 표면효과에 의한 양력 증가를 얻게 되어 초고속으로 운행할 수 있는 선박과 항공기의 중간형태의 차세대 해상운송 수단이다. 해면 위에 직접 이.착륙이 가능하기 때문에 별도의 활주로가 필요 없으며 수륙양용으로 사용 가능하다. 연근해 도서지방 관광 및 신선도 유지가 필수적인 신속화물의 수 송에도 사용될 수 있으며 해난사고 구난 및 해양 경비용으로도 사용가능한 해상 운송수단이다. 본 고에서는 표면효과익선의 특징을 간략히 살펴보고 21세기 고속해상운송수단으로 사용될 가 능성에 대한 경제성 검토 및 핵심애로기술을 살펴보았으며 러시아 표면효과익선의 발달과정과 개발된 선종의 특징을 조사하였다.

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.71-74
• /
• 1995

A numerical model capable of simulating a 2-D airfoil flying over in the vicinity of the waves is discussed. Instead of treating the problem as a heaving oscillation one above the rigid flat wall, sources are distributed on the prescribed wave profile. The wave deformation due to the airfoil is assumed to be negligible and treated as a rigid undulated wall. The source and vortex are distributed on the surface of the foil. It is found that the variation of $C_L$ with wave steepness in severe and that the lift variation due to waves decreases as the wing height above the water surface increases.

• Ocean Systems Engineering
• /
• 제6권3호
• /
• pp.245-264
• /
• 2016

The iterative boundary element method (IBEM) developed originally before for cavitating two-dimensional (2-D) and three-dimensional (3-D) hydrofoils moving under free surface is modified and applied to the case of 2-D (two-dimensional) airfoils and 3-D (three-dimensional) wings over water. The calculation of the steady-state flow characteristics of an inviscid, incompressible fluid past 2-D airfoils and 3-D wings above free water surface is of practical importance for air-assisted marine vehicles such as some racing boats including catamarans with hydrofoils and WIG (Wing-In-Ground) effect crafts. In the present paper, the effects of free surface both on 2-D airfoils and 3-D wings moving steadily over free water surface are investigated in detail. The iterative numerical method (IBEM) based on the Green's theorem allows separating the airfoil or wing problems and the free surface problem. Both the 2-D airfoil surface (or 3-D wing surface) and the free surface are modeled with constant strength dipole and constant strength source panels. While the kinematic boundary condition is applied on the airfoil surface or on the wing surface, the linearized kinematic-dynamic combined condition is applied on the free surface. The source strengths on the free surface are expressed in terms of perturbation potential by applying the linearized free surface conditions. No radiation condition is enforced for downstream boundary in 2-D airfoil and 3-D wing cases and transverse boundaries in only 3-D wing case. The method is first applied to 2-D NACA0004 airfoil with angle of attack of four degrees to validate the method. The effects of height of 2-D airfoil from free surface and Froude number on lift and drag coefficients are investigated. The method is also applied to NACA0015 airfoil for another validation with experiments in case of ground effect. The lift coefficient with different clearance values are compared with those of experiments. The numerical method is then applied to NACA0012 airfoil with the angle of attack of five degrees and the effects of Froude number and clearance on the lift and drag coefficients are discussed. The method is lastly applied to a rectangular 3-D wing and the effects of Froude number on wing performance have been investigated. The numerical results for wing moving under free surface have also been compared with those of the same wing moving above free surface. It has been found that the free surface can affect the wing performance significantly.

• 한국미생물·생명공학회지
• /
• 제18권6호
• /
• pp.620-623
• /
• 1990

김치발효시 nisin의 저해효과를 보기 위해 김치 g당 100IU의 nisin을 첨가하여 대조구와의 발효양상을 비교 하였다. 김치를 제조하여 15'C에서 발효시킬 때 pH의 변화는 대조구가 발효 5일에 pH 4.04인 반면 nisin 첨가구는 7 일째에 pH4.03으로 떨어졌으며, 산도는 대조구가 발효 5일, 9일 14일에 각각 0.57, 0.93, 1.13이었으나 nisin 첨가구는 0.47, 0.69, 0.88의 낮은 산생성량을 보였다. 젖산균의 최대 증식은 대조구가 발효 7 일째에 1.8, 1.6 x 10CFU/ml을 나타냈으며, nisin 첨가구는 5 일째에 9.5, 6.4 x 107CFU/ml 를 나타내어 nisin에 의한 젖산균의 생육저해를 보였다.