• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.1
• /
• pp.46-53
• /
• 2012

The WBAN technology means a short distance wireless network which provides each device's interactive communication by connecting devices inside and outside of body located within 3 meters. Standardization on the physical layer, data link layer, network layer and application layer is in progress by IEEE 802.15.6 TG BAN. It is necessary to develop the WBAN core technology that sensor node device, WBAN middleware and WBAN application service for WBAN environment. In this paper we designed the medical message structure and implemented medical application for purpose of vital information reliability. The message structure was proposed for WBAN environment and application can be check biometric information from BN on smart device through WBAN gateway.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.290-292
• /
• 2009

With advance in technologies for wireless sensor networks(WSNs), 2.4 GHz band has become gradually attractive due to increase in low-power wireless communication devices. Especially ZigBee(IEEE 802.15.4-based) technology whose frequency band includes the 2.4GHz industrial, scientific and medical band providing nearly worldwide availability has been universally applicable to a various remote monitoring system and applications related home network system. However network throughput of these systems is significantly deteriorated due to this ISM band is a license-exemption used in a variety of low-power wireless communication devices. For instance, other IEEE 802 wireless standards such as Bluetooth, WLAN, Wi-Fi and others cause radio interference to ZigBee. The experiments was carried out to analyze radio frequency interference between heterogeneous devices using ISM bands to improve the limited frequency utility factor. Finally this paper suggests a frequency hopping-based adaptive multi-channel methods to decrease interference with empirical results.

• ETRI Journal
• /
• v.38 no.2
• /
• pp.314-325
• /
• 2016

This paper examines the resource gain that can be obtained from the creation of clusters of nodes in densely populated areas. A single node within each such cluster is designated as a "hotspot"; all other nodes then communicate with a destination node, such as a base station, through such hotspots. We propose a semi-distributed algorithm, referred to as coordinated cognitive tethering (CCT), which clusters all nodes and coordinates hotspots to tether over locally available white spaces. CCT performs the following these steps: (a) groups nodes based on a modified k-means clustering algorithm; (b) assigns white-space spectrum to each cluster based on a distributed graph-coloring approach to maximize spectrum reuse, and (c) allocates physical-layer resources to individual users based on local channel information. Unlike small cells (for example, femtocells and WiFi), this approach does not require any additions to existing infrastructure. In addition to providing parallel service to more users than conventional direct communication in cellular networks, simulation results show that CCT can increase the average battery life of devices by 30%, on average.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.6
• /
• pp.2377-2397
• /
• 2020

Human activity recognition is widely used in smart homes, health care and indoor monitor. Traditional approaches all need hardware installation or wearable sensors, which incurs additional costs and imposes many restrictions on usage. Therefore, this paper presents a novel device-free activities recognition system based on the advanced wireless technologies. The fine-grained information channel state information (CSI) in the wireless channel is employed as the indicator of human activities. To improve accuracy, both amplitude and phase information of CSI are extracted and shaped into feature vectors for activities recognition. In addition, we discuss the classification accuracy of different features and select the most stable features for feature matrix. Our experimental evaluation in two laboratories of different size demonstrates that the proposed scheme can achieve an average accuracy over 95% and 90% in different scenarios.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1255-1261
• /
• 2010

An operating information and fault recode of train is very important information for safety driving and maintenance. And these information is increased and need high speed as the number of trains is increased. Wireless LAN or CDMA network is efficient to report more complicated and various information from vehicle to server in control center. Existing wireless transmission system has weakness due to transmission system is separated with TDCS and standalone. At first, standalone system needs space to be installed and cost is increased. And data transmission capacity and speed is limited by complicated structure that transmission system receive data thru serial communication like RS232 and then data transmission system send data to server in control center. This article is study to develop embedded & wireless fault code transmission device to be installed in TDCS to overcome weakness of space and to have more cost effective and simple structure. It is adapted 802.11b/g WiFi for wireless communication and OS is used embedded Linux that can easily implement wireless communication environment and ensure TCP/IP communication’s security. We also implement simple server to test wireless communication between embedded & wireless fault code transmission device and server in control center.

• Journal of Sensor Science and Technology
• /
• v.25 no.2
• /
• pp.131-137
• /
• 2016

In this study, a multilevel visible light communication (VLC) system based on resistor ladder circuit is designed to transmit medical data. VLC technology is being considered as an alternative wireless communication due to various advantages such as ubiquity, license free operation, low energy consumption, and no radio frequency (RF) radiation characteristics. With VLC even in places where traditional RF communication (e.g., Wi-Fi) is forbidden, significant bio-medical signal including the electrocardiography (ECG) and photoplethysmography (PPG) data can be transmitted. More lives could be saved anywhere by this potential advantage of VLC with a fast emergency response time. A multilevel transmission scheme is adopted to improve the data capacity with keeping simplicity, where data transmission rate can increase by log2m times (m is the number of voltage levels) than that of conventional VLC transmission based on on/off keying. In order to generate multi-amplitudes, resistor ladder circuit, which is a basic principle of digital to analog convertor, is employed, and information is transferred through LED (Light-Emitting Diode) with different voltage level. In the receiver side, multilevel signal is detected by optical receiver including a photo diode. Then, the collected data are analyzed to serve the necessary medical care to the concerned patient.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1157-1165
• /
• 2012

In this paper, we measure and analyze propagation characteristic of heating, ventilation, and air conditioning(HVAC) ducts within buildings for wireless networks. We analyze the duct structures, implement the feeders exciting propagating modes, and simulate the excitation characteristic. We measure the propagation characteristic of HAVC ducts at 2.45 GHz WiFi band and compare it with that of LOS and partitioned office environments. We propose the design method of wireless network using HVAC ducts based on our results.

• Journal of the Korean housing association
• /
• v.25 no.3
• /
• pp.115-121
• /
• 2014

This paper draws the home into the stream of information and communications technology (ICT) development. Considering that homes and our home life are constantly affected by persistent change influenced by ICT, it is remarkable that ICT has been relatively neglected as an object of research in the field of housing studies. This study provides an overview of conceptual movements in ICT/home relationships and their design and social impact through a critical discourse analysis. The conceptual movements must be considered by professionals in the field of housing and built environment to stay attuned to changes in the 21st Century. Diverse debates took place in the discourse about ICT in relation to home. The stream of thought was started by futurists who saw the electronic cottage as a solution to the social problems caused by the separation of work and home life in industrial cities. ICT has now entered a new phase, with WiFi P2P networks and location-based social media that encourage sharable homes. Based on the analysis of the discourse on ICT and home, we drew from three issues related to the paradigm shifts in homes in the context of ICT development to provide future directions for housing studies: from space programming to time scheduling, from individual ownership to shared access, and from live+work dwelling to live+work+community.

• The Journal of the Korea Contents Association
• /
• v.11 no.8
• /
• pp.448-458
• /
• 2011

The availability of many smartphone applications and ubiquitous Wi-Fi technology has greatly spread the uses of smartphones. Particularly smartphones with the locative media services in tourism are booming because location-based technology such as GPS is well suit with tourism and tourists' needs. Smartphones also overcome the technological limit of traditional information media such as printed book, newspaper, etc. Based on the Niche Theory, the study examines the competitive relationships among information media that are used in tourism including smartphones, traditional paper publications, and computers. The paper also examines the niche of each medium based on the theory and finds which medium is more effective and preferred by people who utilize the services before and during their travel.

• Journal of Korea Multimedia Society
• /
• v.17 no.12
• /
• pp.1461-1472
• /
• 2014

Recently, smart devices has been spreaded and the definition of RFID/USN(Radio Frequency Identification/Ubiquitous Sensor Network) technology has also extended. So, originally, human is an agent of communications but now, 'the things' are also an agent of communication. That is, Internet of Things(IoT). IoT is very big IT infra technology that is based on wire-wireless network technologies such as Bluetooth and Wi-Fi. However, in reality, IoT service that can provide various meaning and integrate smoothly is not appear yet. To solve these problems of IoT, we implemented Publish/Subscribe system, which operate in Zigbee based wireless sensor network by using MQTT-SN protocol. Moreover, this system can operate with combining MQTT system that is already existed in external Internet network so, extensibility and flexibility aspect is excellent. We show that possibility of IoT services that is combined between different heterogeneous network through the MQTT-SN.