• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.6
• /
• pp.890-896
• /
• 2022

In this paper, gimbal camera control through smart gloves was implemented to increase convenience and accessibility to the control of drones used in various fields. Smart gloves identify human gestures and transmit signals through Bluetooth. The received signal is converted into a signal suitable for the drone through a GCS (Gound Control Station). Signals from smart gloves are expressed in a quaternion method to prevent gimbal locks, but for gimbal cameras, conversion is required to use Roll, Pitch, and Yaw methods. The data conversion mission is performed in the GCS. The GCS transmits an input signal to the control board of the drone through Wi-Fi. The control board generates and outputs the transmitted signal in a PWM manner. The output signal is input to the gimbal camera through the SBUS method and controlled. The input signal of the smart glove averaged 0.093 s and up to 0.099 s to output to the gimbal camera, showing that there was no problem in real-time use.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.3
• /
• pp.11-16
• /
• 2023

As techniques for indoor positioning, fingerprinting, indoor positioning method using trilateration, and utilizing information obtained from equipments by Wi-Fi/Bluetooth, etc are common and representative methods to specify the user's indoor position. However, in these methods, an indoor space should be provided with enough space to install a large number of equipment (AP, Beacon). In this paper, we propose a technique that can express the user's location within a building by simultaneously using the GPS signal and the signal transmitted from the beacon in a building structure where the conventional method cannot be applied, such as a narrow building. A shortest path search system was designed and implemented by applying the Dijkstra Algorithm, one of the most representative and efficient shortest path search algorithms for shortest path search. The proposed technique can be considered as one of the methods for measuring the user's indoor location considering the structural characteristics of a building in the future.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1113-1120
• /
• 2022

In this paper, a communication methodology for the digital FRTU(: Feeder Remote Terminal Unit) required by the smart grid distribution system was studied. The digital FRTU consists of a fault handling unit and a communication unit. The fault handling unit transmits fault information to the communication unit in case of a failure, and the communication unit is designed to autonomously determine the fault section through two-way communication between surrounding digital FRTUs. For performance verification, a performance verification system consisting of 3 line sections based on 3 digital FRTUs was constructed to enable fault simulation for various failure scenarios. Various fault cases including one phase ground fault, line-to-line short-circuit fault, and three-phase short-circuit fault were experimentally simulated on the established performance verification system, and the validity of the developed methodology was confirmed by proving the accurate fault section inference results for each fault simulation case.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.117-123
• /
• 2022

Unlike the satellite-based outdoor positioning system, the indoor positioning system utilizes various wireless technologies such as BLE, Wi-Fi, and UWB. BLE-based beacon technology can measure the user's location by periodically broadcasting predefined device ID and location information and using RSSI from the receiving device. Existing BLE-based indoor positioning system studies have many studies comparing the error between the user's actual location and the estimated location at a single point. In this paper, we propose a technique to evaluate the positioning accuracy according to the movement path or area by applying the entropy analysis model. In addition, simulation results show that calculated entropy results for different paths can be compared to assess which path is more accurate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.2
• /
• pp.230-238
• /
• 2022

Internet of Things(IoT) is a communication technology that collects information of object remotely and controls the function of object by adding a communication function to object that does not have a communication function. For the IoT, various communication technologies such as Wi-Fi, 3GPP, and Bluetooth are available, and Long Range(LoRa) is communication technologies specialized in the IoT concept. LoRa is a communication technology that support long-distance, low-power, and low-speed communication, and is suitable for collecting information generated form object in remote equipment and controlling equipment. Because of these characteristics, it is used in many application field, and various performance improvement studies are in progress. This paper intends to propose an ultra-long-range LoRa communication module that can be used in a wider range of applications. We design and implement hardware, firmware, and application software for testing to develop ultra-long-range LoRa communication modules. The implemented module will be tested in a real environment to verify its performance and to check its utilization.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.1
• /
• pp.8-13
• /
• 2022

This paper investigates the method to implement a RF (Radio Frequency) energy harvesting sensor node and to build a sensor network using a CATV network and a leaky coaxial cable. The power supply of a sensor node is designed with the WPTS (Wireless Power Transfer System) receiver operating at 915MHz. A sensor network has limited coverage by the loss of RF signal at a wireless transmission link. The paper proposes to build a sensor network that the BLE signal of a sensor and the signal of a WPTS power transmitter are transmitted through a coaxial cable of a CATV network by utilizing WOC (WiFi over Coax) technology and radiates at a leaky coaxial cable. The length of a leaky coaxial cable and the total loss of a wire link are allowed to the point that the RSSI of a sensor node is more than the minimum value (-78dBm) and lead to extend wireless coverage.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.3
• /
• pp.1-17
• /
• 2022

Accurate analysis of the causes of metro rail traffic congestion provides a means of addressing issues arising from metro rail traffic congestion in metropolitan areas. Currently, congestion analysis based on counting, weight detection, CCTVs, and mobile Wi-Fi is limited by poor accuracies or because studies have been restricted to single routes and trains. In this study, a train congestion analysis model was used that includes the transfer and multi-path behavior of metro passengers and train operation plans for metropolitan urban railroads. Analysis accuracy was improved by considering traffic patterns in which passengers must wait for next trains due to overcrowding. The model updates train crowding levels every 10 minutes, provides information to potential passengers, and thus, is expected to increase the social benefits provided by the Seoul metropolitan subway

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.205-212
• /
• 2023

In the modern society, the extreme weather caused by climate change has brought about exceptional damage in succession over the world due to the use of fossil fuels, and infectious diseases such as COVID-19 worsen the quality of human life. It is urgently necessary to reduce green-house gas and use new renewable energy. The global environmental pollution should be decreased by reducing the use of fossil fuels and using new renewable energy. This paper suggests a system which can function for the environment of four seasons, safety and communication, through the photovoltaic power-based intelligent CCTV, internet and WiFi, and cooling and heating systems, and can optimally manage power, through the real-time monitoring of the production and the consumption of the photovoltaic power. It suggests a hybrid generation system supporting diesel generation without discontinuation in the case of emergency such as system power outage caused by cold waves, typhoons and natural disasters in which the photovoltaic power generating system cannot be used.

• Journal of the Korean Society for Library and Information Science
• /
• v.57 no.1
• /
• pp.5-21
• /
• 2023

The purpose of this study is to analyze how library visitors use spaces in the library and to make suggestions for improving library use environments. Library use patterns were analyzed by tracking the users' smartphone WiFi. A library located in Seoul, Korea was selected and detectors were installed in the library. The suggestions from the results analyzing data collected between September, 2016 and December, 2016 were as followed. 27.17% of library visitors used a space in the library. Among them, 28.69% used the lobby to return their checked-out materials. Therefore, the library is recommended to install a device in the area in which users are easy to return their items. Additionally, since the spatial relationship between cultural program room and book shelves was low, those programs might be improved by providing library materials related with them.

• Journal of Advanced Technology Convergence
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2023

Recently, there have been increasing interests in researches to apply wireless communication technologies for smart farm. This paper introduces the problems in the smart farm for the outdoor culture and technical considerations to solve the problems. As candidate technologies, this paper selects LoRa, Sigfox, NB-IoT, and Wi-Fi and then determines that LoRa is a suitable technology based on the CAPEX, coverage, transmission rate, battery, and the price. To provide technical analysis, this paper introduces technologies related to the physical and medium access control (MAC) layers as well as the security. Specifically, this paper includes the modulation technology in the physical layer, Class (Class A, B, and C) based protocol operations in MAC layer, and security architecture based on the LoRa version.