• 대한소아치과학회지
• /
• 제24권4호
• /
• pp.758-762
• /
• 1997

There are various types of localized tooth malpositions in the mixed dentition, such as abnormal tooth axis, anterior crossbite of some incisors, impaction, midline diastema, ectopic eruption, and so forth. We, Pediatric Dentists, have usually used removable appliances for these instances. But, removable orthodontic appliances, as is known, have marked limitations in some situations, for example, severe rotation, intrusion and extrusion, root torque, closure of large diastema, traction of impacted tooth, etc. In such cases, Whip spring, combined with fixed or removable appliance, can increase utilities of removable orthodontic appliances. The authors have applied whip springs to some cases showing localized positional and arrangement problems, and have witnessed the results as follows; 1. The refined and elaborate control of direction and magnitude of force by the operator, and accurate compliance of the patients were requisite for the treatment with it. 2. It showed special effectiveness for de rotation of incisors. Although it yields some benefit for root movement, the special consideration for incomplete roots in this age bracket was required. 3. In the localized malalignment cases in mixed dentition, uncurable with traditional removable appliances but practically unrealistic with fixed appliance therapy, the whip spring was thought to be a good alternative.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.65-66
• /
• 2012

일반적으로 HF 안테나는 6m 이상의 길이를 갖는 휩 안테나를 사용하고 있다. 본 논문에서는 상용의 HF용 휩 안테나의 크기를 줄인 새로운 HF 안테나를 제안하였다. 제안하는 안테나의 모양은 "ㄷ"자형으로, 전체 크기는 $1m{\times}2m$ 이며, 안테나의 특성을 NECWin 툴을 사용하여 시뮬레이션 하였다.

• 응용통계연구
• /
• 제28권5호
• /
• pp.1003-1011
• /
• 2015

한국 프로야구에서 팀들의 실점을 설명하기 위한 지표를 연구하였다. Kim과 Kim (2014)이 팀들의 득점력을 설명하기 위한 공격지표를 연구한 것과 유사하게 본 논문에서는 팀들의 실점을 설명하기 위한 수비지표를 연구하였다. 여러 가지의 수비지표 중 팀의 실점과 관련이 큰 것들을 결합하여 만든 몇 가지의 결합지표들을 고려하였다. 프로야구 원년인 1982년부터 2014년까지의 정규리그 전 경기 자료를 분석한 결과 WHIP와 경기당피홈런의 가중평균으로 정의되는 가중WPH가 실점을 가장 잘 설명해줬다. 구체적으로 WHIP에 81%, 경기당피홈런에 19%의 가중값을 주는 가중WPH가 팀의 평균실점과 0.95033의 상관계수를 갖는 최적의 가중WPH인 것으로 나타났다. 시대별 분석에서도 크게 다르지 않은 결과를 얻었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1015-1019
• /
• 2001

There are several bearing systems at the large steam-turbines in thermal power plant. The bearing system is one of the most important parts of rotating machinery. The steam turbine vibrations mainly depend on the bearing oil and the shaft alignment condition. This paper describes on the steam turbine abnormal vibration due to the oil whip in terms of the shaft alignment in the thermal power plant.

• 소음진동
• /
• 제8권4호
• /
• pp.574-579
• /
• 1998

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.153-158
• /
• 2000

The purpose of present paper is to prove an improvement on stability of plane Journal bearing due to the leaf spring damper(LSD) experimentally A flexible rotor system is designed and manufackuea in order to generate oil whip instability of journal bearing at relative lower rotating speed. Vibration amplitude and instability onset speeds are investigated for a conventional plane journal bearing and plane journal bearing with LSD. To investigate the damping effects of LSD on stability of bearing, experiments are also conducted on the leaf spring dampers with and without working oil. It is found that the leaf spring damper can considerably increase the instability onset speed of a plane journal bearing.

• Tribology and Lubricants
• /
• 제17권3호
• /
• pp.185-190
• /
• 2001

The purpose of present paper is to prove an improvement on stability of plane journal bearing due to the leaf spring damper (LSD) experimentally. A flexible rotor system is designed and manufactured, in order to generate oil whip instability of journal bearing at relative lower rotating speed. Vibration amplitude and instability onset speeds are investigated for a conventional plane journal bearing and plane journal bearing with LSD. To investigate the damping effects of LSD on stability of bearing, experiments are also conducted on the leaf spring dampers with and without working oil. It is found that the leaf spring damper can considerably increase the instability onset speed of a plane Journal bearing.

• 대한치과보철학회지
• /
• 제37권5호
• /
• pp.640-650
• /
• 1999

As an optimal quality of the restorations, there should be a least amount of seating discrepancy between the casting and abutment teeth. However, high viscosity of the cementing medium and its resulting thickness may prevent complete seating of the restoration. The use of die spacing material provides adequate internal relief for the cementing medium. The purpose of this study is to compare the thickness of three commonly used die spacing materials. Materials and Methods: Stone plates were fabricated and divided into 12 sections to be painted with die spacers. Tru-Fit, Whip-Mix and Belle do St. Claire die spacer which are commonly used in dental practice were tested in this study. Each die spacers were painted layer by layer according to the manufacturer's recommendation. The average thickness of each die spacers were measured with light microscope(${\times}100$) and compared between them. Results and Conclusions. A silver-colored Tru-Fit die spacer has the lowest value of thickness without statistical significance comparing with a gold-colored Tru-Fit die spacer and a gray layer of Whip-Mix die spacer has the highest value of thickness without any statistical significance comparing with Belle de St. Claire die spacer. Three and four layers of Tru-Fit die spacer and two layers of Whip-Mix and Belle de St. Claire die spacers seem to be in the acceptable range of thickness of 25 to $45{\mu}m$ for optimal seating of the restorations. The standard experimental design and method should be fur thor evaluated for more consistent and objective results.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.636-643
• /
• 2001

Interference between the crossover leg of the reactor coolant system (RCS) and the pipe whip restraints (PWR) has brought a degradation issue of the integrity of the Reactor Coolant System in Westinghouse type nuclear power plants (NPPs) of Korea. According to the gap Inspect ion carried out during planned overhaul (Year 2000), interference between the crossover leg and the PWR was found in each RCS loop. This plant has had the high vibration problem on the RC pump 'B'. The reason for the high vibration in the RC pump 'B' had been massively surveyed and it was found that the crossover leg of RCS contacted with the PWR in hot condition. Since the contact between the crossover leg and the PWR changes the dynamic characteristics of the piping system for the RCS, this is considered as one reason for the high vibration. And a possibility of overstress on the crossover leg due to the contact with the PWR should be evaluated. Through performing RCS integrity analyses, subsequent actions were initiated to increase the gap between those parts. As the results of the appropriate separation between two parts, it was reported that there was no unusual noise or vibration during plant heat-up. In this paper, the evaluations for the gap between the crossover leg and the PWR and the structural integrity due to loop binding is described.

• Restorative Dentistry and Endodontics
• /
• 제5권1호
• /
• pp.29-34
• /
• 1979

The purpose of this study was to measure thermal expansions of dental investments, Biovest(Casting Investment. Dentsply International INC, U.S.A.), Multi-Best (Use for all dental chrome-cobalt alloys, The Ransom & Randolph Co. U.S.A.), Kerr(Inlay Investment. Sybron Kerr, U.S.A.), O. K. (Inlay Investment. Shofu Dental MFG, Co. Japan), Whip-Mix (Cristobalite Inlay Investment. Whip-Mix Corporation. U.S.A.). Thermal expansion of specimens(5mm in diameter and 50mm in length) was measured by a dilatometer at the temperature range from $20^{\circ}C$ to $700^{\circ}C$ by comparing expansion between standardized quartz and experimental specimens with heating rate about $300^{\circ}C$/hr. The following results were obtained. 1. The coefficient of thermal expansion of Biovest was $15{\times}10^{-6}/^{\circ}C$ in the water powder ratio 18/100 and $14{\times}10^{-6}/^{\circ}C$ in the water powder ratio 28/100. Those of Multi-Best were $9{\times}10^{-6}/^{\circ}C$ in the water powder ratio 14/100 and $7{\times}10^{-6}/^{\circ}C$ in the water powder ratio 24/100. 2. The coefficient of thermal expansion of Kerr were $17{\times}10^{-6}/^{\circ}C$ in the water powder ratio 38/100 and $14{\times}10^{-6}/^{\circ}c$ in the water powder ratio 48/100. Those of O. K. were $9{\times}10^{-6}/^{\circ}C$ in the water powder ratio 33/100 and $7{\times}10^{-6}/^{\circ}C$ in the water powder ratio 43/100 3. The coefficient of thermal expansion of Whip-Mix were $14{\times}10^{-6}/^{\circ}C$ in the water powder ritio 40/100 and $12{\times}10^{-6}/^{\circ}c$ Fein the water powder ratio 50/100. Those of Hi-Heat were $11{\times}10^{-6}/^{\circ}c$ in the water powder ratio 28/100 and $10{\times}10^{-6}/^{\circ}c$ in the water powder ratio 38/100.