• 제목/요약/키워드: WHEN-DO

검색결과 8,449건 처리시간 0.04초

DESIGN OF A CONTEXT ANALYSIS MODEL ON USN ENVIRONMENT

  • Jin, Cheng-Hao;Lee, Yong-Mi;Nam, Kwang-Woo;Lee, Jun-Wook;Ryu, Keun-Ho
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
    • /
    • pp.122-125
    • /
    • 2008
  • Sensors used in many USN (Ubiquitous Sensor Network) domain applications generate a large amount of sensor stream data. The volume of sensor stream data is too huge to store the whole data and data speed is too fast to control each of them. In order to provide rapid and reliable context analysis service over sensor stream data, we propose a WHEN-DO context analysis model that supports the functionality of sliding window. This model is designed to be used as follows: If the sensor stream data satisfies condition in 'WHEN' clause, then it will execute actions in 'DO' clause in WHEN-DO context analysis model. The proposed WHEN-DO context analysis model can be applied to many other USN environment applications such as monitoring the status of a building and then taking actions in corresponding context condition.

  • PDF

인상채득 후 경화시 트레이의 위치에 따른 주모형의 변화 (Change master cast by hardening method to position of tray after impression taking)

  • 이정애
    • 한국치위생학회지
    • /
    • 제8권2호
    • /
    • pp.53-66
    • /
    • 2008
  • There was to purpose of this study improves analyzing cause that prosthesis brings bite engaging that is inaccurate in patient's mouth, when supposed that all conducts that do in operatory and dental laboratory are perfect. Impression did check bite by alginate impression material and polymerization style silicon impression material that use usually in presence at a sickbed Irreversibility, hydrocolloid, alginate impression material washed in flowing water and poured anhydrite after wait about 8 minutes so that region that charge interest after impression check bite may become undoing. And hydrophile property addition polymerization style impression material poured anhydrite after blow 30 considering impression material dwell time and H2 gas occurrence time (5~15 minute) after have washed in flowing water. I got each 7 models, result that manufactures total 28 and measures by third dimension measuring instrument (Meteo, Korea) following sequence curing in tray holder and floor 1, By Alginate impression when is hardened in tray holder and when is hardened in the floor after do check bite, SPH 4, SPH5 all as there is synonymy appeared(P<0.05). By in case do not use average 0.1741 in case use tray holder in 0.0447 SPH5s in case do not use average 0.2838 pastas in case use tray holder in SPH4 0.0309, When did not use both SPH4 and SPH5 tray holder, when used tray holder, 1 appeared more greatly. 2. By amity sex addition polymerization style silicon impression when is hardened in tray holder after do check bite and when is hardened in the floor SPH 4, a11 of the SPH5s very big synonymy be(P>0.05). And in case use tray holder in 0.000657 pasta SPH5s in case do not use average 0.000129 pastas in case use tray holder in SPH4 average 0.000114 pastas, by in case do not use 0.000757, I appeared more greatly when used tray when did not use both SPH4 and SPH5 tray holder, but 1 appeared is not level to keep in mind(Table 8~9). 3 SPH4 was looked very big mindfulness in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon without using tray holder(P< 0.001). I use tray holder and SPH4 did not appear synonymy in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon(P>0.05). Study finding of above when see synthesis Alginate certainly tray holder use must and I could know that hardening method does not exert big influence on volume stability if remove impression sieve of excess because amity sex accessory penalty silicon passes over tray, Also, Alginate impression material previewed can get heading a conspiracy style that volume stability of accessory penalty silicon impression material degree is if use tray holder.

  • PDF

CMMI 기반 군 항공기 인터콤 탑재용 제어 소프트웨어 개발에 대한 DO-178C 적용 연구 (A Study on Applying The DO-178C to The Control SW Development of The Military Aircraft Intercom Based on CMMI)

  • 윤인복
    • 전기전자학회논문지
    • /
    • 제19권3호
    • /
    • pp.415-423
    • /
    • 2015
  • 미국 FAA에서 민간 항공기에 대한 감항인증 시 채택되고 있는 DO-178C 가이드가 최근 국내에서도 군 항공기 감항인증을 위한 가이드로 채택되고 있는 실정이다. 이것은 군항공기 감항인증 담당자가 소프트웨어 개발 문서들을 점검할 때 모든 문서들이 DO-178C 가이드에 따라 검증되었는지 여부를 검토한다는 것을 의미한다. 그러나 군항공기용 인터콤 장비의 국산화 개발 시 DO-178C 가이드 준용 요구사항이 없었기 때문에 우리는 군 항공기 인터콤 제어 소프트웨어를 CMMI 레벨3에 따라 개발하였다. 따라서 우리가 인터콤 시스템의 감항인증을 고려할 때 추가적으로 필요한 소프트웨어 산출문서들을 준비하기 위해 CMMI 레벨3 기반의 소프트웨어 개발이 DO-178C 가이드와 얼마나 다른지에 대한 분석이 필요하게 되었다. 그러므로 본 연구는 CMMI 레벨3과 DO-178C 간 차이점들을 분석하고 DO-178C 가이드와 비교하여 CMMI 레벨3상의 어떤 데이터들이 항공기 감항인증 준수에 필요한지를 제시한다. 분석 결과를 통해 감항인증 시 참조되는 DO-178C 가이드 대비 CMMI모델에서 필요한 데이터가 무엇인지를 알 수 있고 향 후 CMMI 모델 환경에서 감항인증 준수를 고려한 항공기 구성품 탑재용 소프트웨어 개발시 본 연구결과를 적용할 수 있다.

해상가두리 어류양식업의 지역별 어종별 생산성 분석 (Productivity Analysis by Region and Species of Fish Cage-culture)

  • 김수현;김대영
    • 수산경영론집
    • /
    • 제52권3호
    • /
    • pp.27-38
    • /
    • 2021
  • This study is aimed to figure out the productivity and variability of cage-aquaculture changes. According to the analysis, the productivity of major fish species has been increasing, except mullet. Although the regional productivity has decreased in the last two years, it has been on the rise considering as a whole. Gyeongsangnam-do showed the highest level of productivity by region. Productivity by species was also higher than other regions in the cases of rock fish, mullet and sea bream followed by productivity of Chungcheongnam-do. The production of marine cage-culture in Jeollanam-do is the second largest in Korea in value/weight while its productivity is lower than that of Chungcheongnam-do. When it comes to comparison by region, Gyeongsangnam-do shows the lowest productivity variation. And Jeollanam-do shows the second-lowest variation in productivity that is only about half of that of Chungcheongnam-do province. Thus, it is found that Jeollanam-do region has an advantage in management stability while its productivity is low. On the other hand, productivity by species was also analyzed. Gyeongsangnam-do has the highest productivity by species for rock fish, mullet and sea bream whereas rock bream productivity is the highest in Jeollanam-do. Therefore, it probably needs to reflect these results when choosing regional-focused incubation fish species.

수질오염이 산업용수에 미치는 영향 -경안천을 중심으로- (Effect of Water Pollution on the Irrigation Water - On the Kyungan Stream -)

  • 라규환;권영식;노수홍
    • Environmental Analysis Health and Toxicology
    • /
    • 제6권1_2호
    • /
    • pp.1-6
    • /
    • 1991
  • The quality of water in Kyungan stream was analyzed in three different areas between season of irrigation on May and of nonirrigation on august in 1990. The results of Water quality from this study were summarized as follows: 1. The quality of water is season of irrigation containing metal ions, such as Cu and Zn as well as TN was exceeded standard levels of quality of agricultural water However, in season of nonirrigation, the quality of water in Kyungan stream was not suitable for using agricultural water due to over standard levels of containing ions of Cu and Zn or DO, COD and TN. 2. The correlation of water quality exception of pH was shown a reliance when p values were greater than 0.01 for containing ions such as Cu and Zn with the DO, COD and TN. 3. The comparison of water qualities for pH between season of irrigation and season of nonirrigation in Kyungan stream was a considerable significance property when p values were less than 0.05. The water quality containing ions of Cu and Zn with DO, COD, TN and SS also indicated a significant property when p values were less than 0.01. 4. The average water qualities of a year in three different areas for pH have shown a significant property when p values are less than 0.01. The average water qualities of a year containing DO have also shown a significant property having p values of less than 0.05. But other constituents have shown no significant property in the above three different areas.

  • PDF

가습기살균제 노출로 인한 건강피해 신고자의 지역별 편차에 대한 고찰 (A Study on the Regional Distribution of Enrollment Cases Who Reported Humidifier Disinfectant-Related Health Effects)

  • 주민재;윤정교;조은경;이슬아;오재현;박진현;양원호;최윤형
    • 한국환경보건학회지
    • /
    • 제47권4호
    • /
    • pp.303-309
    • /
    • 2021
  • Background: Humidifier disinfectant is a biocidal product used in the water tanks of humidifiers to prevent the growth of microorganisms. Although there are a huge number of cases of reported humidifier disinfectant-related health effects across the entire Korean population, their numbers are distributed differently depending on the region. Objectives: This study aimed to investigate the regional distribution of enrollment cases who reported humidifier disinfectant-related health effects. Methods: This study used data on 6,240 subjects who experienced humidifier disinfectant-related health effects and who enrolled their cases which is conducted by the Korea Ministry of Environment. We examined the regional distribution of the enrolled cases based on sixteen administrative divisions and assessed the: 1) crude number; 2) proportional rate; and 3) age-standardized proportional rate of enrollment by region. Results: When we examined the crude number of enrollments by region, the highest number were in Gyeonggi-do Province (n=1,896), followed in order by Seoul (n=1,405), Incheon (n=436) Busan, Daegu, Gyeongsangnam-do Province, Daejeon, Chungcheongnam-do Province, Gyeongsangbuk-do Province, Jeollabuk-do Province, Gwangju, Chungcheongbuk-do Province, Gangwon-do Province, Jeollanam-do Province, Ulsan, and Jeju-do. When we examined proportional rate of the regional enrollment (cases per 100,000 population), Daejeon (n=16.2) was the region with the highest rate, followed in order by Gyeonggi-do Province (n=16.1), Incheon-do Province (n=15.9), Seoul, Daegu, Gwangju, Jeollabuk-do Province, Chungcheongnam-do Province, Busan, Chungcheongbuk-do Province, Gangwon-do Province, Gyeongsanbuk-do Province, Gyeongsangnam-do Province, Ulsan, Jeju-do, and Jeollanam-do Province, which is inconsistent with the order in terms of crude numbers. However, when we examined the age-standardized proportional rate of regional enrollment (cases per 100,000 population), their ranked distribution is consistent with the crude rate. Conclusions: This study observed that the regional distribution of the enrolled cases who reported humidifier disinfectant-related health effects is inconsistent with the regional distribution of the proportional rate of enrollment cases, which may be caused in part by the volume of the inherent population of each region.

Writing papers: literary and scientific

  • Hwang, Kun
    • Journal of Trauma and Injury
    • /
    • 제35권3호
    • /
    • pp.145-150
    • /
    • 2022
  • This paper aims to summarize why I write, how to find a motif, and how to polish and finish a manuscript. For William Carlos Williams, practicing medicine and writing poetry were two parts of a single whole, not each of the other. The two complemented each other. Medicine stimulated Williams to become a poet, while poetry was also the driving force behind his role as a doctor. Alexander Pope, the 18th century English poet, wrote a poem entitled "The Epistle to Dr. Arbuthnot" that was dedicated to a friend who was both a poet and a physician. In this poem, we receive an answer to the questions of "Why do you write? Why do you publish?" Pope writes, "Happy my studies, when by these approv'd! / Happier their author, when by these belov'd! / From these the world will judge of men and books." When I write, I first reflect on whether I only want to write something for its own sake, like "a dog chasing its own tail," instead of making a more worthwhile contribution. When my colleagues ask me, "Why do you write essays as well as scientific papers?" I usually answer, "Writing is a process of healing for me-I cannot bear myself unless I write." When the time comes to sit down and put pen to paper, I remind myself of the saying, festina lente (in German, Ohne Hast, aber ohne Rast, corresponding to the English proverb "more haste, less speed"). If I am utterly exhausted when I finish writing, then I know that I have had my vision.

Low-cycle fatigue behaviors of 316L austenitic stainless steel in high temperature water: Effects of pre-soaking, dissolved oxygen, and boric acid & lithium hydroxide

  • Xiong, Yida;Watanabe, Yutaka;Shibayama, Yuki;Zhong, Xiangyu;Mary, Nicolas
    • Nuclear Engineering and Technology
    • /
    • 제54권9호
    • /
    • pp.3215-3224
    • /
    • 2022
  • Latest studies found that for 316LN austenitic stainless steel (ASS), its LCF life decreased noticeably in high temperature water containing a great amount of dissolved oxygen (DO) (2 ppm DO), compared with that in the water containing 50 or 100 ppb DO. This finding is different from previous studies about ASSs. This study confirmed that the 316L had similar behavior to 316LN. The LCF life of 316L in water containing 1000 ppb DO water was considerably shorter than that in the water containing 50 ppb DO. Addition of boric acid & lithium hydroxide and pre-soaking did not display noticeable effects on the LCF life of this material in the water with 1000 ppb DO, indicating the discrepancy between the latest studies and previous studies was not caused by the boric acid & lithium hydroxide and pre-soaking. This study also confirmed that similar to 316LN, when a certain amount of DO was added into the water, the amount of hydrogen absorbed into the material decreased significantly compared with that when the DO was less than 5 ppb.

Automatic Control Of Dissolved Oxygen In Activated Sludge Aeration Tank

  • Park, Kwang-Soo;Heo, Nam-Hyo;Lee, Hae-Goon;Han, Gee-Baek;Kim, Chang-Won
    • Environmental Sciences Bulletin of The Korean Environmental Sciences Society
    • /
    • 제3권2호
    • /
    • pp.113-119
    • /
    • 1999
  • The quality of the effluent from an activated sludge aeration tank can deteriorate when the substrate removal rate decreases due to an abrupt reduction in the DO concentration, which is affected by such operating conditions as the loading rate, temperature, wastewater composition, and so on. In this research, a DO control system that includes a PI (proportional-integral) controller/Hiraoka controller was developed and applied to a pilot-scale activated sludge process, then its acceptability was estimated. The applicability of the respiration rate to DO control was also estimated. The respiration rate indicated a variety of input organic loading rates, which is the main disturbance to the DO concentration in an aeration tank. When the influent concentration incrementally decreased and increased between CODcr 1,000 mg/l and 100 mg/l, the control system with a PI controller exhibited a good llperformance-the average DO concentrations were 2.00$\pm$0.14 mg/l and 1.88$\pm$0.15 mg/l (set value was 2.0 mg/l), respectively, and the settling time was just 10 minites. When the control system was operated for 4 days, the DO concentration was 1.99$\pm$0.18 mg/l and 32.6% of the air flowrate was saved. However, the fluctuations in the respiration rates and air flowrates were severe, which could be harmful to the stability of the biomass and mechanical stability of the blower. A possible approach to solve this problem may be the simultaneous control of the loading rate and DO concentration.

  • PDF

Unstable vivax malaria in Korea

  • Ree, Han-Il
    • Parasites, Hosts and Diseases
    • /
    • 제38권3호
    • /
    • pp.119-138
    • /
    • 2000
  • Korean vivax malaria had been prevalent for longtime throughout the country with low endemicity. As a result of the Korean war (1950-1953), malaria became epidemic. In 1959-1969 when the National Malaria Eradication Service (NMES) was implemented, malaria rates declined, with low endemicity in the south-west and south plain areas and high endemic foci in north Kyongsangbuk-do (province) and north and east Kyonggi-do. NMES activities greatly contributed in accelerating the control and later eradication of malaria. The Republic of Korea (South Korea) was designated malaria free in 1979. However, malaria re-emerged in 1993 and an outbreak occurred in north Kyonggi-do and north-west Kangwon-do (in and/or near the Demilitarized Zone, DMZ) , bordering North Korea. It has been postulated that most of the malaria cases resulted from bites of sporozoite-infected females of An. sinensis dispersed from North Korea across the DMZ. Judging from epidemiological and socio-ecological factors, vivax malaria would not be possible to be endemic in South Korea. Historical data show that vivax malaria in Korea is a typical unstable malaria. Epidemics may occur when environmental, socio-economical, and/or political factors change in favor to malaria transmission, and when such factors change to normal conditions malaria rates become low and may disappear. Passive case detection is a most feasible and recommendable control measure against the unstable vivax malaria in Korea in cost-effect point of view.

  • PDF