• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.1
• /
• pp.59-65
• /
• 2022

Virtual memory is used as the method to ensure the safety of the system through memory protection in the real-time system. TLB miss caused by using virtual memory makes the real-time system WCET more pessimistically. TLB lockdown can be applied as a method to improve this problem. However, processors with limited TLB lockdown entries, a selection criterion is needed to efficiently utilize the TLB lockdown entry. In this paper, the most frequently accessed virtual pages in the process are applied to the TLB lockdown by analyzing memory profiling. The results showed that micro data TLB miss stall cycle and main data TLB miss stall cycle of the processor decreased by at least 4.7% and up to 29.7%.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.4
• /
• pp.467-478
• /
• 1999

실시간 태스크의 최악 실행시간을 예측할 때 과예측이 발생하는 원인은, 첫째 프로그램의 동적인 최악 실행 행태를 정적으로 분석하는 것이 근본적으로 어렵기 때문이며, 둘째 최근의 RISC 형태 프로세서에 포함되어 있는 파이프라인 실행 구조와 캐쉬 등이 그러한 정적 분석을 더욱 어렵게 만들기 때문이다. 그런데 기존의 연구에서는 각각의 과예측 원인을 해결하기 위한 방법에 대해서만 언급하고 있을 뿐 분석의 정확도에서 각 원인이 차지하는 비중에 대해서는 언급하고 있지 않다. 이에 본 연구에서는 최악 실행시간 예측시 과예측을 유발하는 원인들, 즉 분석 요소들의 영향을 정량적으로 조사함으로써 기존의 최악 실행시간 분석 기법들이 보완해야 할 방향을 제시하고자 한다. 본 연구에서는 실험이 특정 분석 기법에 의존하지 않도록 하기 위하여 시뮬레이션 방법에 기반한다. 이를 위해 분석 요소별 스위치가 포함된 MIPS R3000 프로세서를 위한 시뮬레이터를 구현하였는데, 각 스위치는 해당 분석 요소에 대한 분석의 정확도 수준을 결정한다. 모든 스위치 조합에 대해서 시뮬레이션을 반복 수행한 다음 분산 분석을 수행하여 어떤 분석 요소가 가장 큰 영향을 끼치는지 고찰한다.Abstract Existing analysis techniques for estimating the worst case execution time (WCET) of real-time tasks still suffer from significant overestimation due to two types of overestimation sources. First, it is unavoidably difficult to predict dynamic behavior of programs statically. Second, pipelined execution and caching found in recent RISC-style processors even more complicate such a prediction. Although these overestimation sources have been attacked in many existing analysis techniques, we cannot find in the literature any description about questions like which one is most important. Thus, in this paper, we quantitatively analyze the impacts of overestimation sources on the accuracy of the worst case timing analysis. Using the results, we can identify dominant overestimation sources that should be analyzed more accurately to get tighter WCET estimations. To make our method independent of any existing analysis techniques, we use simulation based methodology. We have implemented a MIPS R3000 simulator equipped with several switches, each of which determines the accuracy level of the timing analysis for the corresponding overestimation source. After repeating simulation for all of the switch combinations, we perform the variance analysis and study which factor has the largest impact on the accuracy of the predicted WCETs.

• International Journal of Automotive Technology
• /
• v.5 no.4
• /
• pp.269-276
• /
• 2004

There has been considerable activity in recent years in developing timing analysis algorithms for distributed real-time control systems. However, it is difficult for control engineers to analyze the timing behavior of distributed real-time control systems because the algorithms was developed in a software engineer's position and the calculation of the algorithm is very complex. Therefore, there is a need to develop a timing analysis tool, which can handle the calculation complexity of the timing analysis algorithms in order to help control engineers easily analyze or develop the distributed real-time control systems. In this paper, an interactive timing analysis tool, called RAT (Response-time Analysis Tool), is introduced. RAT can perform the schedulability analysis for development of distributed real-time control systems. The schedulability analysis can verify whether all real-time tasks and messages in a system will be completed by their deadlines in the system design phase. Furthermore, from the viewpoint of end-to-end scheduling, RAT can perform the schedulability analysis for series of tasks and messages in a precedence relationship.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.1
• /
• pp.194-203
• /
• 2005

The process of guaranteeing that a distributed real-time control system will meet its timing constraints, is referred to as schedulability analysis. However, schedulability analysis algorithm cannot be simply used to analyze the system because of complex calculations of algorithm. It is difficult for control engineer to understand the algorithm because it was developed in a software engineer's position. In this paper we introduce a Response-time Analysis Tool(RAT) which provides easy way far system designer to analyze the system by encapsulating calculation complexity. Based on the RAT, control engineer can verify whether all real-time tasks and messages in a system will be completed by their deadline in the system design phase.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06b
• /
• pp.255-260
• /
• 2007

내장 실시간 시스템은 논리적 정확성과 시간적 정확성을 모두 만족해야 하는 내장 시스템이다. 시스템의 시간적 정확성을 위해서는 해당 시스템에서 동작하는 태스크들의 스케줄링 가능성을 검사해야 한다. 스케줄링 가능성을 분석하기 위해서는 태스크의 실행 시간 분석이 선행 되어야 한다. 하지만 태스크의 실행 시간은 실행 시점에 따라 가변적이기 때문에 태스크의 정확한 실행 시간을 알아내기는 힘들다. 따라서 가능한 모든 경우를 고려하여 해당 태스크를 구성하는 코드 경로 중 최악의 경로일 경우의 실행 시간인 최악 실행 시간을 이용한다. 기존의 정적 최악 실행 시간 분석을 하는 도구의 경우 동적인 상황의 정보 부재로 인해 최악 실행 시간의 과대 측정 비율이 높다는 문제점이 있다. 본 논문에서는 정적 최악 실행 시간 분석 시 과대 측정 비율을 줄이기 위해 대상 기기에 실행 정보를 적용한 RunInfo(WCET analysis tool using the Run-Time Information) 분석 도구를 설계하고 구현한다. 실행 정보를 정의하고, RunInfo 분석 도구의 구조에 대해 설명한다. 그리고 실행 정보를 적용할 때, 고려할 점에 대해 알아본다. 성능 평가를 위해 RunInfo 분석 도구의 과대 측정 비율을 기존의 분석도구와 비교한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.866-874
• /
• 2006

This paper proposes a new Dynamic Voltage Scaling(DVS) algorithm to achieve low-power scheduling of aperiodic hard real-time tasks. Aperiodic tasks schedulingcannot be applied to the conventional DVS algorithm and result in consuming energy more than periodic tasks because they have no period, non predictable worst case execution time, and release time. In this paper, we defined Virtual Periodic Task Set(VTS) which has constant period and worst case execution time, and released aperiodic tasks are assigned to this VTS. The period and worst case execution time of the virtual task can be obtained by calculating task utilization rate of both periodic and aperiodic tasks. The proposed DVS algorithm scales the frequency of both periodic and aperiodic tasks in VTS. Simulation results show that the energy consumption of the proposed algorithm is reduced by 11% over the conventional DVS algorithm for only periodic task.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.5
• /
• pp.91-101
• /
• 2014

In this study, we presented a timing verification method for a passenger car diesel engine management system (EMS) using measurement-based worst-case execution time (WCET) analysis. In order to cope with AUTOSAR-compliant software architecture, a development process model is proposed. In the process model, a runnable is regarded as a test unit and its temporal behavior (i.e. maximum observed execution time, MOET) is obtained along with on-target functionality evaluation results during online unit test. Furthermore, a cost-effective framework for online unit test is proposed. Because the runtime environment layer and the standard calibration environment are utilized to implement test interface, additional resource consumption of the target processor is minimized. Using the proposed development process model and unit test framework, the MOETs of 86 runnables for diesel EMS are obtained with 213 unit test cases. Using the obtained MOETs of runnables, the WCETs of tasks are estimated and the schedulability is evaluated. From the schedulability analysis results, the problems of the initially designed schedule table is recognized and it is fixed by redesigning of the runnable mapping and task offset. Through the various test scenarios, the proposed method is validated.

• Journal of KIISE:Software and Applications
• /
• v.28 no.3
• /
• pp.211-223
• /
• 2001

본 논문에서 제안하는 시나리오기반 검증기법의 목적은 UML로 작성된 객체지향 분석모델의 완전성 및 일관성을 진단하는 것이다. 검증기법의 전체 절차는 요구분석을 위한 Use Case 모델링 과정에서 생성되는 Use Case 시나리오와 UML 분석모델로부터 역공학적 방법으로 도출된 객체행위 시나리오와의 상호참조과정 및 시나리오 정보트리 추적과정을 이용하여 단계적으로 수행된다. 본 검증절차를 위하여 우선, UML로 작성된 객체지향 분석모델들은 우선 정형명세언어를 사용하여 Use Case 정형명세로 변환하다. 그 다음에, Use Case 정형명세로부터 해당 Use Case 내의 객체의 정적구조를 표현하는 시나리오 정보트리를 구축하고, Use Case 정형명세 내에 포함되어 있는 객체 동적행위 정보인 메시지 순차에 따라 개별 시나리오흐름을 시나리오 정보트리에 표현한다. 마지막으로 시나리오 정보트리 추적과 시나리오 정보 테이블 참조과정을 중심으로 완전성 및 일관성 검증작업을 수행한다. 즉, 검증하고자 하는 해당 Use Case의 시나리오 정보트리를 이용한 시나리오 추적과정을 통해 생성되는 객체행위 시나리오와 요구분석 과정에서 도출되는 Use Case 시나리오와의 일치여부를 조사하여 분석모델과 사용자 요구사양과의 완전성을 검사한다. 그리고, 시나리오 추적과정을 통해 수집되는 시나리오 관련종보들을 가지고 시나리오 정보 테이블을 작성한 후, 분석과정에서 작성된 클래스 관련정보들의 시나리오 포함 여부를 확인하여 분석모델의 일관성을 검사한다. 한편, 본 논문에서 제안하는 검증기법의 효용성을 증명하기 위해 대학의 수강등록시스템 개발을 위해 UML을 이용해 작성된 분석모델을 특정한 사례로써 적용하여 보았다. 프로세싱 오버헤드 및 메모리와 대역폭 요구량 측면에서 MARS 모델보다 유리함을 알 수 있었다.과는 본 논문에서 제안된 프리페칭 기법이 효율적으로 peak bandwidth를 줄일 수 있다는 것을 나타낸다.ore complicate such a prediction. Although these overestimation sources have been attacked in many existing analysis techniques, we cannot find in the literature any description about questions like which one is most important. Thus, in this paper, we quantitatively analyze the impacts of overestimation sources on the accuracy of the worst case timing analysis. Using the results, we can identify dominant overestimation sources that should be analyzed more accurately to get tighter WCET estimations. To make our method independent of any existing analysis techniques, we use simulation based methodology. We have implemented a MIPS R3000 simulator equipped with several switches, each of which determines the accuracy level of the

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.286-298
• /
• 2002

The Remote Procedure Call(RPC) has been traditionally used for Inter Process Communication(IPC) among precesses in distributed computing environment. As distributed applications have been complicated more and more, the Mobile Agent paradigm for IPC is emerged. Because there are some paradigms for IPC, researches to evaluate and compare the performance of each paradigm are issued recently. But the performance models used in the previous research did not reflect real distributed computing environment correctly, because they did not consider the evacuation elements for providing security services. Since real distributed environment is open, it is very vulnerable to a variety of attacks. In order to execute applications securely in distributed computing environment, security services which protect applications and information against the attacks must be considered. In this paper, we evaluate and compare the performance of the Remote Procedure Call with that of the Mobile Agent in IPC paradigms. We examine security services to execute applications securely, and propose new performance models considering those services. We design performance models, which describe information retrieval system through N database services, using Petri Net. We compare the performance of two paradigms by assigning numerical values to parameters and measuring the execution time of two paradigms. In this paper, the comparison of two performance models with security services for secure communication shows the results that the execution time of the Remote Procedure Call performance model is sharply increased because of many communications with the high cryptography mechanism between hosts, and that the execution time of the Mobile Agent model is gradually increased because the Mobile Agent paradigm can reduce the quantity of the communications between hosts.