• Bulletin of the Korean Chemical Society
• /
• 제30권4호
• /
• pp.897-901
• /
• 2009

Heme oxygenase-1 (HO-1) is an anti-inflammatory and anti-apoptotic protein and has been applied to various gene therapy researches. However, constitutive expression of HO-1 may induce deleterious side effects. In this research, hypoxia inducible HO-1 expression plasmid, pEpo-SV-HO-1, was constructed with the erythropoietin (epo) enhancer and simian virus 40 (SV40) promoter to avoid these unwanted side effects. Dexamethasone conjugated polyethylenimine (PEI-Dexa) was used as a gene carrier. It was previously reported that dexamethasone protected cardiomyocytes from apoptosis under hypoxia. In this research, PEI-Dexa reduced the caspase-3 level in hypoxic H9C2 cardiomyocytes as a derivative of dexamethasone, suggesting that PEI-Dexa is an anti-apoptotic reagent as well as a gene carrier. pEpo-SV-HO-1 was transfected to H9C2 cardiomyocytes using PEI-Dexa and the cells were incubated under normoxia or hypoxia. HO-1 expression was induced in the pEpo-SV-HO-1 transfected cells under hypoxia. In addition, cell viability under hypoxia was higher in the pEpo-SV-HO-1 transfected cells than the pEpo-SV-Luc transfected cells. Also, caspase-3 level was reduced in the pEpo-SV-HO-1 transfected cells under hypoxia. In addition to the anti-apoptotic effect of PEI-Dexa, hypoxia inducible HO-1 expression by pEpo-SVHO- 1 may be helpful to protect cardiomyocytes under hypoxia. Therefore, pEpo-SV-HO-1/PEI-Dexa complex may be useful for ischemic heart disease gene therapy.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1995년도 춘계학술대회
• /
• pp.74-74
• /
• 1995

GABA transaminase is inactivated by preincubation with p$^1$, p$^2$-bis(5'-pyridoxal) diphosphate at pH 7.0. The inactivation under pseudo-first order conditions proceeds at a slow rate (K$\_$obs/=0.035 min$\^$-1/). The degree of labeling of the enzyme by p$^1$, p$^2$-bis(5'-pyridoxal) diphosphate was determined by absorption spectroscopy, The blocking of 2 lysyl residues/dimer is needed for inactivation of the transaminase. The time course of the reaction is significantly affected by the substrate ${\alpha}$-ketoglutarate, which afforded complete protection against the loss of the catalytic activity. Whereas cofator pyridoxal phosphate failed to prevent the inactivation of the enzyme. Therefore, it is postulated that binding of ${\alpha}$-ketoglutarate tn lysyl residues is the major factor contributing to stabilization of the catalytic site and bifuctional reagent p$^1$, p$^2$bis(5'-pyridoxal) diphosphate blocks lysyl residues other than those involved in the binding of the cofactor.

• Advances in environmental research
• /
• 제9권2호
• /
• pp.135-150
• /
• 2020

Many industries, such as textiles, chemical refineries, leather, plastics and paper, use different dyes in various process steps. At the same time, these industrial sectors are responsible for discharging contaminants that are harmful and toxic to humans and microorganisms by introducing synthetic dyes into wastewater. Of these dyes, methylene blue dye, which is classified as basic dyes, is accepted as a model dye. For this reason, methylene blue dye was selected in the study and its removal from the water was studied. In this study, two efficient biosorbents were developed from chitosan and sunflower waste, an agro-industrial waste and modified using iron nanoparticles. The biosorption efficiency was evaluated for methylene blue (MB) dye removal from aqueous solution under various parameters such as treating agent, solution pH, biosorbent dosage, contact time, initial dye concentration and temperature. We investigated the kinetic properties of dye removal from water for Chitosan-Sunflower (CS), Chitosan-Sunflower-Nanoiron (CSN). When the wavelength of MB dye was spectrophotometrically scanned, the maximum absorbance was determined as 660 nm. For the core shell biosorbents we obtained, we found that the optimum time for removal of MB from wastewater was 60 min. The pH of the best pH was determined as 5 in the studied pH. The most suitable temperature for the experiment was determined as 30℃. SEM-EDAX, TEM, XRD, and FTIR techniques were used to characterize biosorbents produced and modified in the experimental stage and to monitor the change of biosorbent after dye removal. The interactions of the paint with the surface used for removal were explained by these techniques. It was calculated that 80% of CS and 88% of CSN removed MB in optimum conditions. Also, the absorption of MB dye onto the surface was investigated by Langmiur and Frendlinch isotherms and it was determined from the results that the removal was more compatible with Langmiur isotherm.

• Macromolecular Research
• /
• 제10권2호
• /
• pp.91-96
• /
• 2002

To explore the effects of intramolecular interactions within the copolymer on the phase separation behavior of polymer blends, copolymers having two different types of intramolecular interactions, i.e., intramolecular repulsion and intramolecular attraction were prepared . In this study, poly(styrene-co-methylmethacrylate) (P(S-MMA)) having intramolecular repulsion caused by positive interaction between styrene and MMA and poly(styrene-co-ethyl-methacrylate) (P(S-EMA)) and poly(styrene-co-cyclohexylmethacrylate) (P(S-CHMA)) having intramolecular attraction caused by negative interaction between styrene and methacrylate were blended with tetramethyl poly-carbonate (TMPC). The phase behavior of blends was examined as a function of copolymer composition and blend composition. TMPC formed miscible blends with styrenic copolymers containing less than certain amount of methacrylate. The phase separation temperature of TMPC blends with copolymer such as P(S-MMA) and P(S-EMA), first increases with methacrylate content, goes through a maximum and then decreases just prior to the limiting content of methacrylate for miscibility, while that of TMPC blends with P(S-CHMA) always decreases. The calculated interaction energy for TMPC-P(S-EMA) pair is negative and monotonically increases with EMA content of the copolymer. Such behavior contradicted the general notion that systems with more favorable energetic interactions have higher LCST, The detailed inspection of the lattice-fluid theory related to the phase behavior was performed to explain such behavior.

• Geomechanics and Engineering
• /
• 제12권3호
• /
• pp.505-522
• /
• 2017

A fundamental study of drilled shafts-soil systems subjected to lateral cyclic loading in weathered soil was conducted using numerical analyses. The emphasis was on quantifying the soil resistance of laterally cyclic loaded pile using 3D finite element analysis. The appropriate parametric studies needed for verifying the cyclic p-y characteristic are presented in this paper. A framework for determining the cyclic lateral load transfer curve (p-y curves) on the basis of numerical analyses is proposed. Through comparisons with results of field load tests, the three-dimensional numerical methodology in the present study is in good agreement with the general trend observed by in situ measurements and thus, represents a realistic soil-pile interaction for laterally loaded piles in soil than that of existing p-y method. It can be said that a rigorous present analysis can overcome the limitations of existing cyclic p-y methods to some extent by considering the effect of realistic three-dimensional combination of pile-soil forces. The proposed cyclic p-y curve is shown to be capable of predicting the behavior of the drilled shafts in weathered soil.

• 한국표면공학회지
• /
• 제47권4호
• /
• pp.210-214
• /
• 2014

We investigated emission characteristics of tandem organic light emitting devices (OLEDs) with p-type materials as charge generation layer. The tandem OLEDs were fabricated by using $MoO_x$, $WO_x$, C60 and HATCN as p-type material or not using p-type material for charge generation. When HATCN was used as p-type material, it showed high current density at low applied voltage, but increase of efficiency was small because of charge unbalance in emitting layer. In case of tandem OLED not using p-type material, applied voltage increased remarkably because of difficulty of hole injection. In case of $MoO_x$, $WO_x$ or C60 as p-type material, current emission efficiency increased greatly. In particular, current emission efficiency of tandem OLED using $MoO_x$ as p-type material increased up to 3 times than current emission efficiency of single OLED. The Commission Internationale de l'Eclairage (CIE) 1931 color coordinates were changed by overlapping of 504 nm emission wavelength. As a result, emission efficiency of tandem OLED improved compared with single OLED, but driving voltage also increased by increase of organic layer thickness.

• 한국표면공학회지
• /
• 제25권4호
• /
• pp.189-206
• /
• 1992

The effect of activation and electroless nickel plating conditions on contact properties was investi-gated for selective electroless nickel plating of Si wafers in order to obtain an optimum condition of con-tact hole filling. According to RCA prosess, p-type silicon (100) surface was cleaned out and activated. The effects of temperature, DMAB concentration, time, and strirring were investigated for activation of p-type Si(100) surface. The optimal activation condition was 0.2M HF, 1mM PdCl2, 2mM EDTA,$ 70^{\circ}C$, and 90sec under ultrasonic vibration. In electroless nickel plating, the effect of temperature, DMAB concentra-tion, pH, and plating time were studied. The optimal plating condition found was 0.10M NiSO4.H2O, 0.11M Citrate, pH 6.8, $60^{\circ}C$, 30minutes. The contact resistance of films was comparatively low. It took 30minutes to obtain 1$\mu\textrm{m}$ thick film with 8mM DMAB concentration. The film surface roughness was improved with decreasing temperature and decreasing pH of the plating solution. The best quality of the film was obtained at the condition of temperature $60^{\circ}C$ and pH 6.0. The micro-vickers hardness of film was about 800Hv. Plating rate of nickel on the hole pattern was slower than that of nickel on the line pattern.

• 센서학회지
• /
• 제31권2호
• /
• pp.85-89
• /
• 2022

We investigated a pH sensor using an Indium tin oxide (ITO) nanoparticle (NP) film printed on a flexible substrate. First, the printing precision and mechanical stability of the ITO-printed film were investigated. In particular, the factors that influence the crystallinity of ITO films were studied using X-ray diffraction pattern analysis. The response of the ITO pH sensor was calibrated using a series of standard pH solutions (pH 3-11). The pH values of various specimens were measured using an ITO pH sensor, and the results were compared with those of various pH measurement methods. As a result of the experiment, the maximum error was approximately ± 0.04 pH (0.4 %) at pH 9, which indicated that the ITO pH sensor is highly suitable for pH measurement. Finally, we used the ITO pH sensor to the measure of general specimens such as solvents and beverages and compared the results in comparison with those obtained from several conventional methods.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.55-56
• /
• 2007

The p-type ZnO thin film, fabricated by means of the ampoule-tube method, was used to make the ZnO p-n junction, and its characteristics was analyzed. The ampoule-tube method was used to make the p-type ZnO based on the As diffusion, and the hall measurement was used to confirm that the p-type is formed. the current-voltage characteristics of the ZnO p-n junction were measured to confirm the rectification characteristics of a typical p-n junction and the low leakage voltage characteristics. Using the ampoule-tube to fabricate the p-type ZnO will provide a very useful technology for producing the UV ZnO LED and ZnO-based devices.

• 공업화학
• /
• 제17권1호
• /
• pp.100-105
• /
• 2006

$UV/TiO_2$ 허니컴 광촉매가 고정된 반응기에서 여러 운전 변수에 따른 페놀의 분해반응을 고찰하였다. 광촉매의 종류에 따른 페놀의 분해능을 비교한 결과, 이시하라사 STS-02로 코팅한 허니컴 광촉매는 데구사 P25에 비해 약간 높은 광산화 활성을 나타내 주었다. 반면에 국내 N사의 광촉매로 코팅한 허니컴의 경우에는 페놀의 광분해 효과가 거의 나타나지 않았다. 허니컴 광촉매는 데구사 P25의 코팅량이 증가함에 따라 페놀의 광산화 반응속도가 증가하는 경향을 나타내주었다. 데구사 P25로 코팅된 허니컴 반응기의 경우에 원수의 유량이 증가함에 따라 페놀의 광산화 속도가 지속적으로 증가하다가 500 mL/min 이상의 유속에서는 감소하는 경향을 나타내었다. 광촉매 표면이 페놀에 의해 미리 흡착된 경우에는 초기 반응시간에 자외선 조사에 의한 페놀의 부분산화 반응이 일어나 오히려 269 nm에서 페놀의 흡광도가 상승하는 결과를 나타내 주었다.