• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.5
• /
• pp.29-40
• /
• 2018

Even if a small amount of arsenic (As) is entering to small agricultural reservoir from upper streams, small agricultural reservoir becomes sensitive to changes in arsenic concentration depending on the water level in case of accumulation continuously because of its scale. If we want to manage arsenic concentration in small agricultural reservoir, it is very important to understand arsenic changes in agricultural reservoir. In spite of the fact that modeling is the most accurate method for analyzing arsenic concentration changes in small agricultural reservoirs, but, it is difficult to monitor arsenic change everyday. So, if data is prepared for modeling arsenic changes, water quality modeling is more effective than monitoring. Therefore, in this study, arsenic concentration changes was simulated and arsenic concentration change mechanism in small reservoir was analyzed using hydrological and water quality monitoring data and by conducting EFDC (Environment Fluid Dynamics Code)-WASP (Water Quality Analysis Simulation Program) linkage. EFDC-WASP coupling technique was very useful for modeling arsenic changes because EFDC can consider hydrodynamic and WASP can perform arsenic concentration simulation, separately. As a results of this study, during dry season, As concentration was maintained relatively high arsenic concentrations. Therefore, water level control will be needed for managing As concentration of reservoir.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.975-985
• /
• 2013

In this research, the integrated modeling system by coupling of a watershed model, a reservoir model, and a river model has been constructed in Doam reservoir watershed. Because of domestic climate characteristics, it is inevitable to construct the dam for control of flood, water use, and power production due to the heavy rain in the summer. Especially, when the dam is constructed on the stream for these kinds of purpose, it is necessary to consider this region as one watershed and also to make the integrated system for simulation and management. In this study, SWAT model was constructed for watershed modeling and EFDC-WASP model was constructed for simulating the hydrodynamic and water quality of the reservoir and the downstream in Doam dam watershed. Also, the water quality improvement equipment for demonstration was applied in the upstream part of Doam reservoir, which shows the applicability of the developed integrated modeling system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1999.02a
• /
• pp.103-265
• /
• 1999

• Proceedings of the Korea Water Resources Association Conference
• /
• 2000.05a
• /
• pp.703-708
• /
• 2000

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.743-754
• /
• 2000

Model parameters of the WASP5 applied to Saemanguem lake were estimated. The methodology is based on grouping water quality constituents and relevant parameters and successively estimating each group of parameters by a trial-and-error procedure. Chlorophyll-a, nitrogen cycles, phosphorus cycles, BOD and DO were simulated at the complexity level 4. The Saemangeum basin divided into a number of unit sub-watershed. And a water budget model analysis with 22 years from 1975 to 1996 year was examined. In this paper, input data at upstream boundaries of model was made to determine seasonally-averaged flow rate through water budget analysis. Calibration and verification of the model were used seasonal average of water quality measurements in 1997 and 1998 years. Grouping water quality constituents and associated parameters proved to be efficient in estimating a number of model parameters. From the results of model calibration and verification, it was found that quantitative evaluations of nonpoint source for organic matters are essential.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.165-165
• /
• 2022

담수호는 하구에 방조제를 축조하여 인위적으로 조성된 저수지로, 배수갑문을 통해 적정수위를 유지하면서 이수 목적의 수자원으로 재활용할 경우 경제적이며 효율적인 수자원이 될 수 있다. 한편, 담수호는 유역의 최하류에 위치하므로 담수호의 통합적 수자원 관리를 위해서는 상류 유역 특성과 유입 오염물질 및 수체 특성에 대한 종합적인 이해를 바탕으로 수문, 수질, 염도 등 다양한수자원 요소를 고려하여 적절한 관리방안을 수립할 필요가 있다. 따라서 본 연구에서는 유역모형 및 호소모형을 연계하여 담수호의 내외 수위차를 고려한 배수갑문 운영 시나리오에 따른 호내 수문 및 수질 측면에서의 영향을 정량적으로 분석하였다. 충청남도 서산시에 위치한 간월호를 대상으로 HSPF (Hydrological Simulation Program-FORTRAN) 모형을 적용하여 상류유역의 장기유출량 및 수질 모의를 수행하여 호내 유입량 자료로 활용하였다. 호소 내 수리-수질 모의를 위해 3차원 수리해석 모형인 EFDC (Environmental Fluid Dynamics Code)와 호소수질모의 모형인 WASP (Water Quality Analysis Simulation Program)을 연계하여 배수갑문 운영에 따른 호내 수문 및 수질 변화를 모의하였다. 본 연구의 결과는 향후 수문 및 수질 영향을 고려한 담수호의 최적 수자원 관리방안 수립하는데 기초자료로 활용될 수 있을 것으로 기대된다.

• Journal of Korean Society of Water and Wastewater
• /
• v.14 no.2
• /
• pp.174-180
• /
• 2000

In this study two water quality models, widely used in Korea, WASP5 and SWRRB were applied to Lake Paldang. The simulated results were compared with the measured data. The simulation results using WASP5 showed that this model could reasonably predict the concentrations of $NO_3$-N, Organic N, and Organic P. In order to investigate the effect of pollution by non-point source SWRRB was simulated and the concentrations of nutrients were predicted. The results from WASP5 and SWRRB are not directly comparable because their input data are different and output values are differently presented. Therefore, if these two simulation models were applied simultaneously, many valuable data and information could be obtained due to their own applicabilities and advantages.

• Journal of Korean Society on Water Environment
• /
• v.24 no.1
• /
• pp.7-18
• /
• 2008

The objective of this study was to develop and apply a water quality simulation model for the evaluation of ungaged watershed. The Modified WASP5 consisted of three sub-models, LOAD-M, DYN-M, and EUT-M. LOAD-M, an empirical model, estimates runoff loadings using point and non-point source data of villages. Daecheong Dam watershed was selected for the research to calibrate, verify and application of Modified-WASP5. LOAD-M model was established using field data collected from all items of water quality and water quantity gaging stations of the watersheds, and was applied to the ungauged watersheds, taking the watershed properties under consideration. The result of water quality simulation using ModifiedWASP5 shows that the observed BOD data of Yongpo and Daechong Dam in 1999 were 0.8 mg/L and 1.0 mg/L, and simulated data were 0.9 mg/L and 0.9 mg/L, respectively. In case of 1999, average BOD concentrations were 0.8 mg/L and 1.0 mg/L. Simulated concentration showed 1.1 mg/L and 1.5 mg/L, respectively. Generally, the simulation results were in good agreement with the observed data. This study was focused on formulating an integrated model for evaluating ungauged watersheds. Even though simulation results varied slightly due to limited availability of data, the model developed in this study would be a useful tool for the assessment and management of ungauged watersheds.

• Journal of Environmental Science International
• /
• v.18 no.6
• /
• pp.683-690
• /
• 2009

The water quality of reservoir can be controled by water quality prediction model because it can not only grasping the present water state but also predicting the water quality in future. In this study, WASP model is used to predict the water quality of Chungju reguration reservoir. This model has some special option which predicts the pollutant outflow phenomenon caused by the contamination sources. So this model is widely used because that can present the scientific basis in this field. This model can help the managers make the right choice of water quality policy. Environmental grade of Chungju reguration reservoir is in III,IV grade which is in bad condition comparatively. The water contamination will be in poor as the year passes. When considering T-N, T-P which are the nutrient to control eutrophication, the concentrated administration about contamination sources is in urgent.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.462-466
• /
• 2009

The power expansion planning is large and capital intensive capacity planning. In the past, the expansion planning was established with the proper supply reliability in order to minimize social cost. However, the planning can't use cost minimizing objective function in the power markets with many market participants. This paper proposed the power expansion planning model using multi-criteria decision rule. This model used multi objective function considering not only cost minimizing but also GENCO's intension. This paper compared proposed model with WASP model in order to verify the result of proposed model.