• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.225-225
• /
• 2011

국내 기후 특성상 하절기에 집중되는 강우로 인해 댐의 건설이 홍수조절, 용수확보 및 전력생산 등의 목적에 있어서 불가피하다. 이와 같은 저수지와 하류하천은 댐 수문 개폐에 따른 흐름변화로 인하여 수체의 거동 및 수질 변화가 발생하며, 일반적인 하천과는 다른 특성을 지니게 된다. 또한 수심이 깊은 저수지의 경우에는 흐름 방향과 더불어 수심 방향의 특성도 중요하며, 수리 및 수질 모형의 연계를 통한 3차원적인 해석을 필요로 한다. 본 연구 대상인 도암댐은 송천유역에 위치하며, 1989년에 유역변경을 통한 발전용 댐으로 건설되었으나 방류수에 영향을 받는 남대천의 수질이 악화되면서 운영이 중단되었고, 이후 댐 방류수는 그대로 송천으로 흘러 보냄으로써 송천 하류부의 수질에 악영향을 미치고 있는 실정이다. 따라서 하천과 하천 사이 호소가 포함된 유역 단위를 통합적으로 관리할 수 있는 시스템 구축이 필요하다. 본 연구에서는 도암댐 유역의 통합탁수관리시스템을 구축하기 위하여 유역모형과 호소모형을 연계하였으며, 호소내 흐름은 수평방향 뿐만 아니라 수심방향을 통합적으로 해석하기 위해 수리모형과 수질모형을 연계하였다. 또한 호소에 적합한 모형을 선정하고, 호소를 포함한 유역의 영향을 파악해보기 위해 소유역 단위의 모의를 하고자 하였다. 크게 상류유역과 호소 구간으로 나누어 상류유역은 유역모형인 SWAT을 이용하고, 이 결과를 호소 부분의 유입 경계조건으로 적용하여 호소의 수리 및 수질모형인 EFDC-WASP의 연계를 통해 통합수질관리시스템을 구축하였고, 현장 조사결과를 이용하여 시스템의 적합성에 대해 검토하였다.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.1
• /
• pp.29-36
• /
• 2007

This study was carried out to develop a water quality simulation model for the evaluation of an ungauged watershed. For this purpose, the WASP5 model was selected and modified. The model consists of three sub-models, LOAD-M, DYN-M, and EUT-M. LOAD-M, an empirical model, estimates runoff loadings using point and non-point source data of villages. The Geum River Estuary watershed was selected to calibrate and verify the Modified-WASP5. The LOAD-M model was established using field data of water quality and quantity at the gauging stations of the watershed and was applied to the ungauged watersheds, taking the watershed properties into consideration. The result of water quality simulation using Modified-WASP5 shows that the observed average BOD data from Gongju and Ganggyeong were 2.6 mg/L and 2.8 mg/L, and the simulated data were 2.5 mg/L and 2.4 mg/L, respectively. Generally, simulation results were in good agreement with the observed data. This study focused on formulating an integrated model for evaluating ungauged watersheds. Even though simulation results varied slightly due to limited availability of data, the model developed in this study would be a useful tool for the assessment and management of ungauged watersheds.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.4
• /
• pp.534-541
• /
• 2012

This paper tries to elicit an optimal generation mix of Korea. Two approaches, using the screening curve method and taking advantage of a generation expansion planning tool, WASP-IV, are applied in getting the mix. The data used in this study is based on the 5th basic plan for long-term electricity supply and demand. The Load Duration Curve, that is needed for applying Screening Curve Method(SCM), is made based on the load profile in 2010. In our using SCM, the nuclear plant's operation characteristic, carbon emission cost and spinning reserve are considered. In using WASP-IV to get the adequate generation mix, the base and target demand forecasts in the 5th basic plan are used and the carbon emission cost is also considered. In this paper, It introduces the domestic adequacy generation mix in 2024 though SCM and WASP-IV.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.439-439
• /
• 2018

충주호는 충청권의 생 공 농업용수로 이용되는 광역상수원이며, 2016년 기준 연간 약 3만6천톤이 방류되어 남한강 전체 수질에 큰 영향을 미친다. 현재 충주호는 상류 유역의 오염원이 적게 분포하여 1급수의 수질기준을 만족하고 있으나, 상류 유역의 개발로 오염원 유입이 증가할 경우 호소 내 수질 및 남한강 전체 수질에 악영향을 미칠 수 있다. 따라서 충주댐 상류 유역의 오염부 하량 변화에 따른 수질변화를 예측하고, 현재수질 유지를 위한 허용 오염부하량을 산정할 필요가 있다. 한편, EFDC-WASP 연계모델은 수리학적 계산을 보다 정확하게 할 수 있는 동시에 이를 수질모델에 사용할 수 있어 다수의 연구자들에 의해 호소의 수질 모델링이 이루어졌으며 적용성이 많이 검증되었다. 본 연구에서는 EFDC-WASP 연계 모형을 이용하여 충주댐 상류유역의 배출부하 변화에 따른 호내 수질특성 변화를 분석하고자 한다. 모의구간은 충주댐의 유입지점부터 방류지점까지로, 수치해석을 위한 격자망은 총 800여개의 격자로 구성하였다. 수위자료는 한강홍수통제소에서 제공하는 충주댐 수위자료를 사용하였으며, 수질자료는 환경부 호소 측정지점인 충주호1,2,3 의 자료와 하천 측정지점인 제천A과 한강B의 자료를 사용하였다. 모의기간은 2013-2015년으로 2013년은 모델의 안정기로, 2014년은 보정, 2015년은 검정에 각각 활용하였다. 보검정된 모델을 활용하여 유입부하량 변화에 따른 수질변화를 모의하였고, 1급수 수질을 만족하는 허용부하량을 도출하였다. 본 연구의 방법은 향후 호소 상류유역의 개발에 따른 수질변화 예측과 허용부하량 산정에 활용할 수 있을 것으로 기대된다.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.3
• /
• pp.252-258
• /
• 2000

SWMM and WASP5 were applied for pollutant loading estimate from watershed and reservoir water quality simulation, respectively, to predict estuarine reservoir water quality. Application of natural systems to improve estuarine reservoir water quality was reviewed, and its effect was predicted by WASP5. Study area was the Hwa-Ong reservoir in Hwasung-Gun, Kyonggi-Do. Procedures for estimation of pollutant loading from watershed and simulation of corresponding reservoir water quality were reviewed. In this study, SWMM was proved to be an appropriate watershed model to the nonurban area, and it could evaluate land use effects and many hydrological characteristics of catchment. WASP5 is a well known lake water quality model and its application to the estuarine reservoir was proved to be suitable. These models are both dynamic and the output of SWMM can be linked to the WASP5 with little effort, therefore, use of these models for reservoir water quality prediction in connection was appropriate. Further efforts to develop more logical and practical measures to predict reservoir water quality are necessary for proper management of estuarine reservoirs.

• Journal of Korea Water Resources Association
• /
• v.45 no.3
• /
• pp.331-347
• /
• 2012

The downstream of the Nam River Dam is crucial region for long-term water resource planning for Busan and Gyeongnam Province. Thus, the analysis of flow behavior and water quality is necessary for the sustainable surface water management and the control of pollutant source. In this study, the flow field and BOD transport at the downstream of Nam River Dam were analyzed by incorporating 2-D water quality model, RAM4 and 3-D water quality model, WASP with the hydrodynamic model, RAM2 and EFDC, respectively. The application of 2-D flow analysis model, RAM2 showed that velocity distributions at the five transverse sections of the meandering part closely followed the measured values by ADCP, and the flow field and overflow characteristic at the submerged weir showed satisfactory performance compared with the result of 3-D EFDC model. In addition, the BOD concentration field obtained by RAM2-RAM4 coupled modeling was in good agreement with the result by EFDC-WASP model throughout the computational domain. The hydrodynamic characteristic and water quality at the downstream reach of Nam River Dam are mainly influenced by the Dam discharge, and the water quantity is closely related to the water quality control and fishery environment at the lower part of Nakdong River. Therefore, when further quantitative analysis is necessary regarding these issues, 2-D semi-coupled modeling is recommended in terms of computational effectiveness and model application aspect.

• Journal of Korea Water Resources Association
• /
• v.56 no.5
• /
• pp.337-345
• /
• 2023

Monitoring river microplastics is a challenging task since it is a time-consuming and high-cost process. The use of a physical model to have a better understanding of river microplastics' behaviors can complement the challenging monitoring process. However, there have been very limited studies on modeling river microplastics. In this study, therefore, we evaluated the applicability of one commonly used river water quality model, i.e., the Water Quality Analysis Simulation Program (WASP), in simulating the microplastic concentration in the river environment. We simulated the microplastic concentration in the Anyangcheon stream using the WASP's biochemical oxygen demand (BOD) and suspended solid (SS) variables as possible surrogate variables for the microplastics. Simulation analyses indicate that the SS state variable performs better than the BOD state variable to mimic the observed concentrations of microplastics. This is because of the characteristics of each water quality parameter; the BOD variable, a biochemical indicator, is inappropriate for modeling the behaviors of microplastics, which have generally constant biochemical features. In contrast, the SS variable, which has similar physical behaviors, followed the observed patterns of the microplastic concentrations well. To build a more advanced and accurate model for simulating the microplastic concentration, comprehensive and long-term monitoring studies of the river microplastics under different environmental conditions are needed, and the unit of microplastic concentration should be carefully addressed before its modeling application.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.708-714
• /
• 1999

For the assessment of the level of stream pollution, SWAT-WASP model linked with GIS was applied to a respresentative rural watershed and evaluated for its applicability through calibration and verfication using observed data. Using daily water yields, sediment yields and nutrient discharge simulated by SWAT model, WASP input file was build. Point source pollutant and water quality change in stream was considered in WASP model. For the model applicatiion , digital maps were constructed for watershed boundary, ladn-use , soil series , digital elevation, and topographic data of Bok-Ha watershed using GRASS. The model application results showed that the simulated runoff was in a good agreement with the observed data and indicated reasonable applicability of the model.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.2
• /
• pp.148-160
• /
• 2002

Lake water quality assessment information is useful to anyone involved in lake management, from lakeshore owners to lake associations. 11 provides lake water quality, which can improve how to manage lake resources and how to measure current conditions. It also provides a knowledge base that can be used to protect and restore lakes. SWMM was applied to simulate the discharge and pollutant loads from Boryeong watershed, and WASP5 was applied to analyze the changes of water quality in Boryeong freshwater lake. In each model, the most suitable parameters were calculated through sensitive analysis and some parameters used default data. Simulated in SWMM and measured discharge showed the accuracy of 88.6%. T-N and T-P exceeds the criteria in the simulation of water quality in Boryeong freshwater lake, and control of pollutant loads in the main stream showed the most effective way. Integrated water quality management system was developed to give convenience in the operation of SWMM and WASP5 and data acquisition.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.177-188
• /
• 1993

Model parameters of the WASP4 applied to Lake Paldang were estimated. The methodology is based on grouping water quality constituents and relevant parameters and successively estimating each group of parameters by a trial-and-error procedure. Chlorophyll a, nitrogen cycles, phosphorus cycles, BOD and DO were simulated at the complexity level 4. A water budget analysis using the monthly records of reservoir inflows and outflows in 1989 and 1990 was made to determine seasonally-averaged flowrates at model boundaries. Estimated flowrates were used, together with the seasonal average of water quality measurements in 1989 and 1990 for the calibration and verification, respectively, of the model. Grouping water quality constituents and associated parameters proved to be efficient in estimating a number of model parameters. From the results of model calibration and verification, it was found that quantitative evaluations of nonpoint and benthic sources of organic matters are essential. Benthic sources near the entrance of the Kyeongancheon were the most significant.