• The Magazine of Kiice
• /
• v.5 no.1
• /
• pp.33-37
• /
• 2004

최근 M/W 주파수 대역은 3∼30 ㎓까지 이용되고 있으나 주로 3∼11 ㎓에 밀집되어 운용 중에 있다. 향후 새로운 이동통신 주파수 대역으로 전파전파 특성상 6 ㎓ 이하 대역이 부각되고 있어 이동통신용 주파수 대역을 확보하기 위해서는 기존의 서비스 채널을 재배치하는 것이 필수적인 사항이다. 즉, 일반적으로 3∼10㎓ 대역은 전송거리가 15∼60km 정도까지 M/W 통신로를 구성할 수 있으며, 10∼20㎓ 주파수 대역은 전송거리가 15km 이하인 전송로 구성으로 이용되고 있다. 그러나 갈수록 전송용량이 기하급수로 증가하고 있어 장거리용으로 사용되고 있는 주파수 대역의 부족현상이 나타나는 추세이다. (중략)

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.233-236
• /
• 2005

국내외적으로 M/W 중계용 주파수 대역은 3${\sim}$30GHz 대역이다. 그러나 갈수록 늘어나는 서비스와 전송용량의 증대로 인해 주파수 부족현상이 일어나는 추세이다. 이에 대한 방안으로 주파수 재배치에 관한 문제가 대두되고 있다. 이동방송 중계용 링크인 FPU 링크는 차후 다른 주파수 대역으로 이전시 이전의 링크에서 사용되었던 시스템 제원을 토대로 필요한 대역에 대해 다양한 변조방식으로 시뮬레이션 평가 후 이용채널 개수 및 이전 가능 여부등과 같은 조치가 수행되어져야 한다. 본 논문에서는 M/W 대역 휴대용 디지털 무선전송 시스템으로써 디지털 FPU 링크 시스템을 모델링하고 이동환경에서 발생하는 도플러 천이 효과를 고려한 Clark & Gans 페이딩 채널 모델을 고려하여 페이딩의 영향에 따른 시스템 성능을 분석하였다.

• Journal of IKEEE
• /
• v.26 no.1
• /
• pp.89-94
• /
• 2022

The W-band (75-110GHz) is a band that can utilize at least 10 times more bandwidth than the existing 5G band. Therefore, it is one of the bands suitable for future mobile communication that requires high speed and low latency, such as virtual and augmented reality. However, since the wavelength is short, it has a high path loss and is very sensitive to the atmospheric environment. Therefore, in order to develop a W-band communication system in the future, it is necessary to analyze the characteristics of path loss according to the channel environment. In this paper, to analyze the characteristics of the W-band path loss, the random forest technique was used, and the influence of the channel parameters according to the distance section was analyzed through the path loss data according to various channel environment parameters. As a result of the simulation, the distance has the highest influence on the path loss in the short distance, and the other channel environment factor is almost ignored. However, as the distance section became longer, the influence of distance decreased while the impact of clutter and rainfall increased.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.33-38
• /
• 2008

The probability of an oscillation occurrence in M/W frequency conversion repeaters is low on account of the different operating frequency of the input and output signals. The probability of interference caused by the M/W frequency conversion repeaters to other systems is also low because the systems are used in the line-of-sight. Therefore M/W frequency conversion repeaters are generally used for retransmitting the signal received from base station to the islands. This paper describes the design and implementation of analog predistorter for M/W frequency conversion repeaters in mobile communications. The M/W repeaters convert IF frequency of 1010+/-10MHz to RF frequency of 11GHz. A predistorter can be designed for the M/W repeater operating in either IF or M/W frequency. In this paper IF predistorter operated in 1010MHz is designed and implemented because a M/W predistorter operated in 11GHz is difficult to implement. The IF predistorter can linearize RF modules in the repeater followed by IF stages. The performance test results show that the implemented analog predistorter improves ACPR of 10dB at the output power of 25dBm with the signal frequency of 10.805GHz.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.163-168
• /
• 2018

We developed W-band transceiver module using open MMIC chip such as receiver single chip and transmitting power amplifier. In order to calculate the noise figure and output power value, we analyzed the W-band transition loss from the antenna to MMIC connection and constructed the 12 channel receiver and the 5 channel transmitter. And compared with the results of the measurement. As a result, the output power of the transmitter was similar to the analytical results and the measured results at room temperature and environmental conditions. The noise figure of the receiver was also similar, but some channels showed error of about 3 dB due to manufacturing error.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.2
• /
• pp.345-354
• /
• 2024

In this paper, we propose a triple band WLAN antenna for Wi-Fi 6E band with DGS. The proposed antenna has the characteristics required frequency band and bandwidth by considering the interconnection of two strip lines and three areas on the ground place. The total substrate size is 31 mm (W) × 50 mm (L), thickness (h) 1.6 mm, and the dielectric constant is 4.4, which is made of 22 mm (W₆ + W₄ + W₅) × 43mm (L₁ + L₂ + L₃ + L₅) antenna size on the FR-4 substrate. From the fabrication and measurement results, bandwidths of 340 MHz (1.465 to 1.805 GHz) for 900 MHz band, 480 MHz (2.155 to 2.635 GHz) for 2.4 GHz band and 1950 MHz (4.975 to 6.925 GHz) for 5.0/6.0 GHz band were obtained on the basis of -10 dB. Also, gain and radiation pattern characteristics are measured and shown in the frequency triple band as required.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.4
• /
• pp.441-448
• /
• 2015

In this paper, a CPW-fed dual-band monopole antenna with two branch strips for WLAN(Wireless Local Area Networks) applications was designed, fabricated and measured. The proposed antenna is based on a CPW-feeding structure, and composed of two branch strips and then designed and tuned the length of two branch lines to obtained required frequencies bands. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and carried out simulation about parameters $L_5$, $L_8$, $W_3$, $W_5$, $W_9$. The proposed antenna is fabricated on the FR-4 substrate using the obtained parameters. The numerical and experiment results demonstrated that the proposed antenna obtained the -10 dB impedance bandwidth 1,095 MHz (1.57~2.665 GHz) for 2.4 GHz band and 1,680 MHz (4.99~6.67 GHz) for 5 GHz band satisfied requirement while simultaneously covering the WLAN bands. And characteristics of gain and radiation patterns are determined for WLAN operating bands.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2697-2702
• /
• 2014

In this paper, we demonstrated a Ku-band 2W MMIC power amplifier for satellite communication applications. The device technology used relies on $0.25{\mu}m$ GaAs pseudomorphic high electron mobility transistor (PHEMT) of Wireless Information Networking (WIN) Semiconductor foundry. The 2W MMIC power amplifier has gain of over 29 dB and saturation output power of over 33.4 dBm in the frequency range of 13.75 ~ 14.5 GHz. Power added efficiency (PAE) is a 29 %. To our knowledge, this is the highest power added efficiency reported for any commercial GaAs-based 2W MMIC power amplifier in the Ku-band.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.127-132
• /
• 2018

In this paper, a high conversion gain cascode mixer was designed in W-band and verified by the fabrication and measurements. In the high frequency band such as a W-band, the conversion loss of a mixer is increased because of the poor performance of transistors. This high conversion loss of the mixer requires additional circuits which can give an extra gain such as an RF buffer amplifier, and this can affects the linearity and stability of the overall systems. Therefore, it is necessary to maximize the conversion gain of the mixer. To maximize the conversion gain of the mixer, biases of the transistor were optimized, and output load impedance was optimized by the load-pull simulations. The designed mixer was fabricated in $0.1-{\mu}m$ GaAs pHEMT technology and verified by the measurements. The measurement results shows a maximum conversion gain of -4.7 dB at W-band and an input 1-dB compression point of 2.5 dBm.

• Journal of IKEEE
• /
• v.26 no.1
• /
• pp.77-82
• /
• 2022

The effect of the bias network on the performance of the W-band power amplifier(PA) was investigated. The performances of the typical RC and radial stub networks were examined, and a hybrid network was proposed for W-band application and its performance was confirmed. To verify this, a W-band PA was designed using a 60-nm GaN pHEMT process. When hybrid networks were applied, the PA had improved stability in all frequency bands, secured about 9 dB of power gain at operating frequencies 87 GHz to 93 GHz, and the maximum PAE was found to be about 12.3% at output power of 26.7 dBm.