• 대한치과교정학회지
• /
• 제16권2호
• /
• pp.43-51
• /
• 1986

The highly accurate laser holographic interferemotry method was used to determine in what way low-magnitude forces during maxillary expansion are transmitted to the entire maxillary complex and its surrounding structures. The experiments were carried out on a dryed human skull which had a perfectly preserved, normally aligned maxillary dental arch and intact alveolar process. The skull was fixed within a constructed metal frame which ensured maximal stability of the object. The optical equipment and the object were mounted on antivibration table. Interferograms were taken on the lateral and frontal sides of the maxillary complex, using the 10mW He-Ne laser and the double-exposure method. Analysis of the fringe pattern on the recorded object surface was performed by graphically determining the deformation curves related to the bony surface in selected horizontal and vertical planes. On the basis of this study, the following conclusions can be drawn: 1. The density of the interference fringes was gradually increased with the degree of expansion force. 2. Mechanical reactions on the maxillary complex, circummaxillary sutures, and surrounding bones were clearly visible, even with the lowest loading degree. 3. The amount of bone displacement was greater in application of the force after $90^{\circ}$ turn than in initial application of the same force. 4. The direction of interference fringes on the bony surface was similar at all loading degrees.

• 한국분말재료학회지
• /
• 제26권2호
• /
• pp.112-118
• /
• 2019

Infiltration is a popular technique used to produce valve seat rings and guides to create dense parts. In order to develop valve seat material with a good thermal conductivity and thermal expansion coefficient, Cu-infiltrated properties of sintered Fe-Co-M(M=Mo,Cr) alloy systems are studied. It is shown that the copper network that forms inside the steel alloy skeleton during infiltration enhances the thermal conductivity and thermal expansion coefficient of the steel alloy composite. The hard phase of the CoMoCr and the network precipitated FeCrC phase are distributed homogeneously as the infiltrated Cu phase increases. The increase in hardness of the alloy composite due to the increase of the Co, Ni, Cr, and Cu contents in Fe matrix by the infiltrated Cu amount increases. Using infiltration, the thermal conductivity and thermal expansion coefficient were increased to 29.5 W/mK and $15.9um/m^{\circ}C$, respectively, for tempered alloy composite.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.585-588
• /
• 2003

본 연구는 4D시스템에서 공사일정과 도면의 3D 객체정보를 간편히 연계할 수 있는 방법론 개발을 시도하고 있다. 일반적으로 기존의 방법론에서 이들 정보의 연계는 외부 공정관리 소프트웨어에서 공사일정을 분석하고, CAD 도구에 의해 3D 객체를 생성한 후, 4D시스템에 결과정보를 보내어 연계하는 방식이며, 이러한 방식은 4D시스템 테에서 이들 정보들을 개발 공정마다 재 연결을 해야 하므로 많은 불편함을 야기하고 있다. 본 연구에서는 이러한 불편함을 감소하기 위해 4D시스템내부에서 자체적으로 일정과 3D객체정보를 생성시켜 4D 정보로 활용함으로써, 초기정보입력과정을 단순화하는 방법론을 제시한다.

• Steel and Composite Structures
• /
• 제48권3호
• /
• pp.275-291
• /
• 2023

This paper has focused on presenting vibration analysis of trapezoidal sandwich plates with 3D-graphene foam reinforced polymer matrix composites (GrF-PMC) core and FG wavy CNT-reinforced face sheets. The porous graphene foam possessing 3D scaffold structures has been introduced into polymers for enhancing the overall stiffness of the composite structure. Also, 3D graphene foams can distribute uniformly or non-uniformly in the plate thickness direction. The effective Young's modulus, mass density and Poisson's ratio are predicted by the rule of mixture. In this study, the classical theory concerning the mechanical efficiency of a matrix embedding finite length fibers has been modified by introducing the tube-to-tube random contact, which explicitly accounts for the progressive reduction of the tubes' effective aspect ratio as the filler content increases. The First-order shear deformation theory of plate is utilized to establish governing partial differential equations and boundary conditions for trapezoidal plate. The governing equations together with related boundary conditions are discretized using a mapping-generalized differential quadrature (GDQ) method in spatial domain. Then natural frequencies of the trapezoidal sandwich plates are obtained using GDQ method. Validity of the current study is evaluated by comparing its numerical results with those available in the literature. It is explicated that 3D-GrF skeleton type and weight fraction, carbon nanotubes (CNTs) waviness and CNT aspect ratio can significantly affect the vibrational behavior of the sandwich structure. The plate's normalized natural frequency decreased and the straight carbon nanotube (w=0) reached the highest frequency by increasing the values of the waviness index (w).

• 대한핵의학회지
• /
• 제22권1호
• /
• pp.65-76
• /
• 1988

High affinity complexes for the tumor were obtained by changing pH and composition in the preparation of $^{99m}Tc-DMSA$. The purpose of this study was to investigate the tumor affinity, and in vitro and in vivo characteristics of these complexes. The results obtained were as follows; 1) Tumor imaging agent was formed successfully at pH $6.0\sim9.0$ and renal imaging agent at pH $2.0\sim5.0$. 2) The serum protein binding of $^{99m}Tc-DMSA$ was $89.1\sim92.8%$ at pH $2.0\sim5.0$ and $11.8\sim30.5%$ at pH $6.0\sim9.0$ respectively, and it was not changed with time. 3) The T 1/2 of tumor affinity complex in blood between 3 and 6 hours after injection was $187{\pm}29$ minutes $(mean{\pm}SD)$. 4) In the blood, the radioactivity was mainly in the plasma, and less than 1% was in the cellular components. 5) In the Walker carcinosarcoma 256 bearing Wistar rats, the radioactivity in the kidney increased, and decreased in the skeleton with time. The radioactivity in the tumor showed the peak in 6 hours after injection and decreased thereafter. 6) In the tumor cell, the radioactivity localized mainly in the cytosol, the soluble fraction of the cytoplasm. This study provides the basic knowledge about tumor affinity and usefulness of $^{99m}Tc-DMSA$ in the diagnosis of malignant disease.

• Structural Engineering and Mechanics
• /
• 제75권5호
• /
• pp.571-583
• /
• 2020

Permeation grouting is of great significance for consolidating geo-materials without disturbing the original geo-structure. To dip into the filtration-induced pressure increment that dominates the grout penetration in permeation grouting, nonlinear filtration coefficients embedded in a convection-filtration model were proposed, in which the volume of cement particles in grout and the deposited particles of skeleton were considered. An experiment was designed to determine the filtration coefficients and verify the model. The filtration coefficients deduced from experimental data were used in simulation, and the modelling results matched well with the experimental ones. The pressure drop revealed in experiments and captured in modelling demonstrated that the surge of inflow pressure lagged behind the stoppage of flow channels. In addition, both the consideration of the particles loss in liquid grout and the number of filtrated particles on pore walls presented an ideal trend in filtration rate, in which the filtration rate first rose rapidly and then reached to a steady plateau. Finally, this observed pressure drop was extended to the grouting design which alters the water to cement (W/C) ratio so as to alleviate the filtration effect. This study offers a novel insight into the filtration behaviour and has a practical meaning to extend penetration distance.

• Steel and Composite Structures
• /
• 제22권3호
• /
• pp.537-565
• /
• 2016

Australian railway networks possess a large amount of aging timber components and need to replace them in excess of 280 thousands $m^3$ per year. The relatively high turnover of timber sleepers (crossties in a plain track), bearers (skeleton ties in a turnout), and transoms (bridge cross beams) is responsible for producing greenhouse gas emissions 6 times greater than an equivalent reinforced concrete counterparts. This paper presents an innovative solution for the replacement of aging timber transoms installed on existing railway bridges along with the incorporation of a continuous walkway platform, which is proven to provide environmental, safety and financial benefits. Recent developments for alternative composite materials to replace timber components in railway infrastructure construction and maintenance demonstrate some compatibility issues with track stiffness as well as structural and geometrical track systems. Structural concrete are generally used for new railway bridges where the comparatively thicker and heavier fixed slab track systems can be accommodated. This study firstly demonstrates a novel and resilient alterative by incorporating steel-concrete composite slab theory and combines the capabilities of being precast and modulated, in order to reduce the depth, weight and required installation time relative to conventional concrete direct-fixation track slab systems. Clear benefits of the new steel-concrete composites are the maintainability and constructability, especially for existing railway bridges (or brown fields). Critical considerations in the design and finite element modelling for performance benchmarking of composite structures and their failure modes are highlighted in this paper, altogether with risks, compatibilities and compliances.

• 한국식품과학회지
• /
• 제37권6호
• /
• pp.957-961
• /
• 2005

쌀엿 유통과정 중 변패를 일으키는 효모를 분리하여, 지방산 분석을 통하여 동정하였다. 분리된 균주의 지방산을 Microbial Identification system(MIDI)으로 분석하여 16:0, 16.1$({\Delta}cis\;7)$, 18:2$({\Delta}cis\;9)$, 18:1$({\Delta}cis\;9)$ 그리고 18:1의 탄소골격을 지닌 5가지 지방산을 확인하였다. 이 결과를 MIDI 데이터베이스와 비교하였으며 쌀엿 유통과정 중 변패를 일으킨 변패균을 Zygosaccharomyces bailii로 동정하였다. 쌀엿 변패균의 오염에 의한 쌀엿의 품질 저하를 방지하기 위하여 당도의 변화에 따른 쌀엿의 %수분함량과 수분활성도$(a_w)$의 관계를 연구하였다. 쌀엿의 당도를 약 $1^{\circ}brix$ 증가 시켰을 경우 약 1%의 수분함량이 감소하게 되는 반비례의 상관관계를 가짐을 알 수 있었다. 그리고 $77^{\circ}brix$에서$83^{\circ}brix$까지 당도가 증가하는데 수분활성도$(a_w)$가 0.09 감소하였다. $15^{\circ}C$ 및 $25^{\circ}C$에서 당도가 조정된 쌀엿에 변패균을 접종한 후 저장 시 변패균의 생육을 관찰하였다. $79^{\circ}brix$ 이하의 쌀엿에 변패균이 접종되었을 경우 모두 일정시간 동안 적은 균체 증가량을 나타내다가 급격한 균수의 증가 후 감소하는 생육 특징을 보였다. 그러나 $81^{\circ}brix$ 이상의 조건에서는 15, $25^{\circ}C$에 관계없이 접종 후 3-4주까지 급격한 균수의 감소를 보였으며, 이후에도 완만한 감소를 보이다 14주차부터 변패균의 생육이 더 이상 관찰되지 않았다. 결론적으로 쌀엿이 $81^{\circ}brix$, $25^{\circ}C$ 이하로 생산, 저장된다면 Z. bailii와 같은 변패균의 노출에 다른 피해를 방지할 수 있음을 알 수 있었다.

• 한국강구조학회 논문집
• /
• 제22권3호
• /
• pp.271-280
• /
• 2010

본 연구에서는 국내 건축 구조용 강재인 SN490 강재를 사용하여 실물 크기의 H형강 보와 기둥으로 구성된 모멘트저항골조의 외부 T자형 용접모멘트접합부를 대상으로 실험을 계획하였다. 실험변수를 용접접근공형상, 접합부 이음 방식, RBS(Reduced Beam section)로 하여 9개의 시험체를 제작하였고, 반복재하 실물대 실험을 수행하였다. 실험에 따른 각 시험체의 파괴형태 및 모멘트-층간변위 관계, 변형률 분포를 나타내었으며, 재료인장 실험을 통하여 실험에 사용된 시험체의 전소성모멘트를 구한 다음 특수모멘트 접합부에 해당하는 시험체를 분류하였다. 각 시험체의 모멘트-층간변위 곡선을 골격곡선과 바우싱거곡선으로 분리하여 내력상승률, 소성배율, 에너지 소산량 등을 나타내었으며 이를 가지고 각 시험체의 소성변형능력을 평가하였다. 실험결과 용접접근공이 제거된 시험체가 기존 용접접근공형상을 가지는 시험체에 비하여 우수한 내진성능을 나타내었고, 보 웨브를 용접과 볼트를 병행하고 전단탭을 전체에 걸쳐 보강 용접한 시험체가 가장 우수한 내진성능을 나타내었다.

• 한국산림과학회지
• /
• 제66권1호
• /
• pp.16-36
• /
• 1984

화강암질풍화토(花崗岩質風化土)의 미교란(未攪亂) 시료(試料)를 사용하여 일면(一面) 직접(直接) 전단시험(剪斷試驗)으로 측정(測定)한 전단강도(剪斷强度)와 함수비(含水比), 간극비(間隙比), 건조밀도(乾燥密度), 비중(比重)과의 관계(關係)를 통계(統計) 분석(分析)하였고, 화강암질풍화토(花崗岩質風化土)의 사방시공지(砂防施工地)에 식재(植栽)된 리기다소나무림(林)과 리기테-다소나무림(林)에서 토양단면(土壤斷面)을 만들어 산중식토양경도계(山中式土壤硬度計)로 토양(土壤)의 견밀도(堅密度)를 측정(測定)하고 수근분포(樹根分布)를 조사(調査)하여 통계(統計) 분석(分析)한 결과(結果) 다음과 같다. 1) 함수비(含水比), 간극비(間隙比)와 전단강도(剪斷强度) 간(間)에는 유의적(有意的)인 부(負)의 상관(相關)이며 직접적(直接的)인 관계(關係)에 있었다. 2) 건조밀도(乾燥密度)와 전단강도(剪斷强度) 사이에는 정(正)의 상관(相關)이며 직접적(直接的)인 관계(關係)에 있었다. 3) 비중(比重)과 전단강도(剪斷强度) 간(間)에는 유의적(有意的)인 상관관계(相關關係)를 인정(認定)할 수 없었다. 4) 전단강도(剪斷强度)에 영향(影響)을 미치는 영향요소(影響要素)의 직접효과(直接效果)의 크기는 함수비(含水比)>간극비(間隙比)>건조밀도(乾燥密度)의 순위(順位)이다. 5) 다중선형(多重線型) 회귀방정식(回歸方程式)의 분산분석결과(分散分析結果) 함수비(含水比)만이 회귀성(回歸性)이 인정(認定)되므로 함수비(含水比)를 독립변수(獨立變數)로 하여 전단강도(剪斷强度)를 추정(推定)하기 위한 회귀방정식(回歸方程式)은 제한(制限)된 건조밀도(乾燥密度)의 범위내(範圍內)에서 적합도(適合度)가 매우 높게 평가(評價)되었다. 6) 토양(土壤)의 견밀도(堅密度)는 토심(土深)이 깊어짐에 따라 높아진다. 7) 토양(土壤)의 지표경도(指標硬度)와 수근수(樹根數) 간(間)에는 유의적(有意的)인 부(負)의 상관(相關)이며 직접적(直接的)인 관계(關係)에 있었다. 8) 리기다소나무와 리기테-다소나무의 수근(樹根)은 토심(土深) 20cm까지에 대부분 분포(分布)하고 있었다. 9) 리기다소나무림(林)과 리기테-다소나무림(林)에서 측정(測定)한 토양(土壤)의 지표경도(指標硬度)를 독립변수(獨立變數)로한 회귀방정식(回歸方程式)으로 수근수(樹根數)를 추정(推定)할 수 있었으나 낮은 적합도(適合度)를 나타내었다.