• 한국진공학회지
• /
• 제7권s1호
• /
• pp.1-6
• /
• 1998

The influence of the order-disorder structural transition on the magnetic and mageto-optical, and transport properties of Fe-Al and Co-Al alloy films has been investigated. The disordered states in the alloy films were prepared by vapor quenching deposition on glass substrates cooled by liquid nitrogen. The experimental study of the magento-optical properties of the ordered and disordered Fe-Al and Co-Al alloy films has been carried out in 1.05-5.0 eV energy range at room temperature. The transport properties have been measured in 2-300K temperature range with and without magnetic field of 0.5T. The influence of the order-disorder structural transition on the magnetic and magneto-optical properties was discussed by using the effective medium approximation and the structural defect approach. That on the temperature dependence of the resistivity was analyzed in a framework of the partial localization of the electronic states and the variable range hopping conductivity.

• 한국재료학회지
• /
• 제8권9호
• /
• pp.819-824
• /
• 1998

합금의 주조시 냉각속도가 $\textrm{Nd}_{16}\textrm{Fe}_{72}\textrm{V}_{4}\textrm{B}_{8}$ 소결자석의 결정립 분포와 착자특성에 미치는 영향에 대하여 조사하였다. 냉각속도가 높은 Cu mold를 사용하여 제작한 시료는 좁은 결정립 분포와 착자특성의 향상을 보였다. B화합물을 생성하는 Cr, Mn, Nb 그리고 w과 같은 첨가원소가 Nd-Fe-B계 소결자석의 착자특성에 미치는 영향에 대해서도 조사하였다. Cr이나 W첨가는 보자력의 향상에 효과적이고 $\textrm{Nd}_{16}\textrm{Fe}_{72}\textrm{Cr}_{4}\textrm{B}_{9}$합금은 $\textrm{Nd}_{16}\textrm{Fe}_{72}\textrm{V}_{4}\textrm{B}_{8}$합금과 비슷한 착자특성을 보였다.

• 연구논문집
• /
• 통권29호
• /
• pp.163-171
• /
• 1999

A new titanium alloy system. Ti-xFe-ySi (x,y=0-4 wt%). was designed and characterized with the point at low cost and high strength for casting applications. Fe improved room and elevated temperature mechanical properties owing to solid solution hardening and beta phase stabilization. Si yielded titanium silicides and Si addition over 1 wt% resulted in poor ductility due to coarse silicide chains at prior beta boundaries. The optimum composition was found to be Ti-4Fe-(0.5-1)Si in the viewpoint of tensile strength and ductility which are comparable to the Ti-6Al-4V. The metal-mould reaction was also examined for Ti-xFe and Ti-xSi binary alloy system. The thickness of surface reaction layer w as not affected significantly with Fe content, while it was decreased with Si content. In the Ti-4Si alloy, no reaction layer was found. The depth of surface hardening layer was about $200\mum$ regardless of the mould materials.

• 열처리공학회지
• /
• 제23권3호
• /
• pp.137-141
• /
• 2010

The Co-Cr alloys have clinical histories in dental and orthopaedic implants, and recently in cardiovascular stent applications because the alloys exhibit a high elastic modulus and radiopacity. In order to improve mechanical property of the Co-Cr alloys, electropolishing is employed as the final process. Electropolishing, an anodic dissolution process in the transpassive state, is sensitively affected by process conditions such as current density, machining time, electrode gap. In this study, the effect of heat treatment conditions on surface roughness and inclusion analysis is investigated in Co-Cr alloy (L605). The most smooth surface of Co-Cr alloy is obtained when electropolishing is performed at 15-20 V for 15-30 sec with a electrode gap of 3.5 mm.

• 한국재료학회지
• /
• 제2권6호
• /
• pp.461-467
• /
• 1992

최근 선진국에서 강화되고 있는 CAFE(Corporate Average Fuel Economy :기업평균연비) 규제를 극복하기 위해서는 차량의 경량화가 필수적이며 이를 위해 기존의 금속재료에 비하여 비강도, 탄성계수, 인성등이 우수한 기계적 성질을 가지면서 고분자 기지의 복합재료에 비해서 고온강도, 전기 및 열전도도와 내마모성이 우수한 금속기지 복합재료의 개발은 필수적이고도 중요한 위치를 차지한다. 따라서 본 연구에서는 자동차용 부품재 및 일반산업용 재료로 사용되고 있는 AC4A Al합금에 Si$C_w$prefohm을 용탕 단조법으로 강화하여 복합재료를 제조란 후 matrix와 함계 기계적성질, 마멸특성, 조직실험을 행한 결과 용탕 단조법에 의한 AC4A/Si$C_w$ 복합재료의 최적 제조조건은 용탕온도 80$0^{\circ}C$, 금형은도 40$0^{\circ}C$, preform은도 750-80$0^{\circ}C$, 가압압력 75MPa이었으며 Si$C_w$강화재가 I/M재에 비하여 경도값은 두배이상으로 상승하였고 Si$C_w$ 20v/o에서는 가압에 의한 큰 효과는 없었다.

• 열처리공학회지
• /
• 제9권3호
• /
• pp.177-186
• /
• 1996

Surface alloying of Ti alloy by $CO_2$ laser is able to produce few hundred micrometers thick TiN or TiC surface-alloyed layer with high hardness on the substrate by injecting reaction gas($N_2$ or $CH_4$). Laser surface alloying by means of process control is in many applications essential in order to obtain predictable hardening layer. This research has been investigated the effect of such parameters on TiN and TiC gas alloying of Ti-6Al-4V alloy by $CO_2$ laser. The maximum surface hardness of TiN layer was obtained 1750Hv on the conditions of 0.8kW laser power, 0.8m/min scanning speed and 100% $N_2$ atmosphere. However, the maximum hardness of TiC formation layer after laser treatment was about 630Hv. As scanning speed was increased, the hardness and depth of these layers were decreased at constant laser power.

• Corrosion Science and Technology
• /
• 제8권2호
• /
• pp.89-92
• /
• 2009

Pure Ti as well as Ti-6Al-4V alloy exhibit excellent properties for dental implant applications. However, for a better biocompatibility it seems important to avoid in the composition the presence of V due to the toxic effects of V ion release. Thus Al and V free and composed of non-toxic element such as Nb, Zr alloys as biomaterials have been developed. Especially, Zr contains to same family in periodic table as Ti. The addition of Zr to Ti alloy has an excellent mechanical properties, good corrosion resistance, and biocompatibility. In this study, the electrochemical characteristics of Ti-Zr alloys for biomaterials have been investigated using by electrochemical methods. Methods: Ti-Zr(10, 20, 30 and 40 wt%) alloys were prepared by arc melting and homogenized for 24 hr at $1000^{\circ}C$ in argon atmosphere. Phase constitutions and microstructure of the specimens were characterized by XRD, OM and SEM. The corrosion properties of the specimens were examined through potentiodynamic test (potential range of -1500 ~ 2000 mV), potentiostatic test (const. potential of 300 mV) in artificial saliva solution by potentiostat (EG&G Co, PARSTAT 2273. USA).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제16회 학술발표회 논문개요집
• /
• pp.123-123
• /
• 1998

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2001년도 제21회 학술발표회 초록집
• /
• pp.147-148
• /
• 2001

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2002년도 제23회 학술발표회 초록집
• /
• pp.171-171
• /
• 2002