• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.96-102
• /
• 2001

plasma-sprayed Cr$_2$O$_3$-based coatings containing MoO$_3$ were studied to gain a better understanding of the influence of MoO$_3$ composition in the coatings on their tribological behaviour. A reciprocal type tribo-tester was employed to examine friction and wear behavior of the specimens at high temperature(450。C). The physical characteristics of worn surfaces were investigated by scanning electron microscopy and chemical composition of the coating surfaces was analyzed using a X-ray photoelectron spectrometer. The results showed that friction coefficient of the MoO$_3$-added coatings were lower than those without MoO$_3$ addition. The larger protecting layers were observed at the worn surface of plasma spray coated specimens with MoO$_3$ addition. XPS analysis of the protecting layer indicated that MoO$_3$ composition was dominantly formed at the surface. MoO$_3$ composition in the protecting layer appears to be more favorable in reducing the friction.

• Journal of the Korean Vacuum Society
• /
• v.7 no.2
• /
• pp.141-149
• /
• 1998

The W thin films were deposited on Si3N4 by a PECVD technique. The effects of substrate temperature and gas flow ratio on the properties of the W films were investigated. The deposition of W films were limited by surface reaction at the temperature range of 150>~$250^{\circ}C$, W films had the deposition rate of 150~530 $\AA$/min and stress of 0.85~$14.35\times10 ^9 \textrm {dynes/cm}^2}$ at various substrate temperatures and $SiH_4/WF_6$ flow ratios. $SiH_4/WF_6$ flow ratio affected the deposition rate and stress of the W films, expecially, excessive flow of SiH4 abruptly changed the structure, chemical bonding, and stress of the W films. Among the deposited W films on TiN, Ti, Mo, NiCr and Al adhesion layer, the one on the Al had the best adhesion property.

• Korean Journal of Crystallography
• /
• v.13 no.2
• /
• pp.82-85
• /
• 2002

From the reaction of cis,cis,trans- [MoBr/sub 2/(CO)/sub 2/(PPh/sub 3/)/sub 2/］with 2,6-dimethylphenyl isocyanide, a molybdenum oxohaloisocyanide compound cis,fac-[Mo(O)Br/sub 2/,(CN-C/sub 6/H/sub 3/,-2,6-Me/sub 2/)sub 3/] (1) was iso-lated. Compound 1 was characterized by spectroscopy (/sup 1/H-NMR, /sup 13/C｛/sup 1/H｝-NMR, IR) and X-ray diffraction. Crystallographic data for 1: triclinic space group P(equation omitted), a=9.172(2) (equation omitted), b ＝ 11.550(3) (equation omitted), c ＝ 15.106(3) (equation omitted), α ＝ 100.44(2)°, β＝ 107.12(2)°, γ＝ 107.83(1)°, Z ＝ 2, R(wR/sub 2/) ＝ 0.0529(0.1344).

• Journal of the Korean Society of Radiology
• /
• v.3 no.4
• /
• pp.23-28
• /
• 2009

Monochromatic X-ray can make a medical image of high contrast under a low radiation dose and can be easily generated by combining an X-ray tube and a multilayer mirror. A W/C multilayer mirror was optimally designed for a characteristic X-ray generated from a X-ray tube with Mo target. The d-spacing and the thickness ratio in design parameters were determined under the maximum-reflectivity condition. Tolerances for deposition and alignment of the W/C multilayer mirror were calculated. Within a deposition tolerance of 0.2nm and a alignment tolerance of ${\pm}0.01^{\circ}$, 85% of the theoretical peak reflectivity could be achieved. A multilayer mirror can be widely used for making medical images because of generating high fluence monochromatic X-ray.

• Journal of the Korean institute of surface engineering
• /
• v.33 no.4
• /
• pp.266-272
• /
• 2000

Sputtered $MoS_2$ thin films provide lubrication and wear improvements for vacuum and space applications. In this study, deposition of $MoS_2$ thin films by R.F. magnetron sputtering was studied with regard to the micro-structural change of $MoS_2$ film and mechanical properties. The coating parameters such as the working pressure, the RF power, the substrate temperature, the etching time were varied to determine how these parameters affected the film morphology and mechanical properties of deposited films. The best wear properties and critical load were observed with the film deposited at $70^{\circ}C$, 1.0$\times$$10^{ -3}$ Torr, 170W and 1 hour deposition time. The critical load increased with the increase of sputter etching time.

• Journal of Nutrition and Health
• /
• v.17 no.4
• /
• pp.297-304
• /
• 1984

The effect of dietary fish oil ( mackerel oil : MO, eel oil : EO) on energy utilization in rats was studied with measurements of various tissue lipoprotein lipase( LPL ) and live and heart mitochondrial respiration. Fatty acid composition of mitrochondrial inner membrane matrix was also investigated. Dietary fat level was 10%( w/w) and reference groups were fed soybean oil (SO), repeseed oil ( RO) and beef tallow( BT ). Activity of LPL was about 60% higher in post-heparin plasma and 2 to 3 times higher in adipose tissue of BT group than fish oil or vegetable oil group. But there was no significant difference between fish oil and vegetable oil groups. Inclusion of EO above 2% (w/w) in dietary fat with fille oil of BT, markedly reduced both post -heparin plasma and adipose tissue LPL. Effects of MO and EO were not different in adipose tissue LPL, but EO was more effective than MO, in reducing post -heparin plasma LPL when mixed fat with varying amount of fish oil was used. Hepatic mitochondria isolated from fish oil-fed group showed the lowest rate of respiration but had P/O ratio comparable to SO and BT groups. On the other hand, cardiac mitochondria of fish oil group showed no difference in all the mitochondrial respiration parameters observed RO group had lowest P/O ratio both in hepatic and cardiac mitochondria. Fatty acid compositions of mitochondrial lipid differ between SO, RO, BT and MO groups, notably in the content of $C_{22:1}$ fatty acid.

• Economic and Environmental Geology
• /
• v.51 no.6
• /
• pp.493-507
• /
• 2018

The Wooseok deposit in Jecheon belongs to the Hwanggangri Mineralized Distict of the northeastern Ogcheon Metamorphic Belt. Its geology consists mostly of limestone of the Choseon Supergroup and the Cretaceous Muamsa granite intruded at the eastern area of the deposit. The deposit shows vertical occurrence of skarn and hydrothermal vein ores with W-Mo-Fe and Cu-Pb-Zn mineralization and skarn is developed only at lower levels of the deposit. Skarn minerals are replaced or cut by ore minerals in paragenetic sequence of magnetite-hematite, molybdenite-scheelite-wollframite, and higher abundances of pyrrhotite-chalcopyrite-pyrite-sphalerite-galena. Garnet has chemical compositions of $Ad_{65.9-97.8}Gr_{0.3-32.0}Pyr_{0.9-3.0}$, corresponding to andradite series, and pyroxene compositions are $Hd_{4.5-49.7}Di_{42.3-93.9}Jo_{0.5-7.9}$, prevailing in diopside compositions, both of which suggest oxidized conditions of skarnization. On the FeS-MnS-CdS ternary diagram, FeS contents of sphalerite in vein ores decrease with increasing MnS contents from bottom to top levels, possibly relating to W mineralization in deep and Pb-Zn mineralization in shallow level. Sulfur isotope values of sulfide minerals range from 5.1 to 6.8‰, reflecting magmatic sulfur affected by host rocks. W-Mo skarn and Pb-Zn vein mineralization in the Wooseok deposit were established by spatio-temporal variation of decreasing temperature and oxygen fugacity with increasing sulfur fugacity from bottom to top levels.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.4
• /
• pp.446-448
• /
• 2000

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.97-97
• /
• 2009

산업용 온수관련용 자동차용 등의 다양한 용도로 응용이 가능한 고기능성 세라믹 히터 제작을 위해 후막공정 기술을 적용한 적층형 세라믹 히터의 수요가 증가하고 있으며, 고열로 인한 변형의 우려가 있는 내열성 기판 제작에도 적층형 HTCC 세라믹 기판 적용이 확대되고 있다. 이러한 고내열성 세라믹 기판 제작을 위해서는 paste의 균일성, Low TCR 특성 및 세라믹과 paste 매칭성 확보가 중요한 요소이다. 본 연구에서는 W/Mo 함량비를 변화시켜가며 paste를 제조하여 비저항과 TCR 특성을 비교한 후 가장 낮은 값을 나타내는 조성을 선정하였다. 이 조성에 $Al_2O_3$, $Ta_2O_5$ 등의 첨가제를 사용하여 비저항 특성 개선을 위한 실험을 통해 우수한 고내열성 기판용 paste 조성을 확보하고자 하였다. 그리고 이 Paste를 적용하여 HTCC 그린시트와 매칭성 조건을 확인하고자 하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.191-191
• /
• 2007

유효 산화막 두께가 약 2.0nm 정도의 $ZrO_2$ 절연막 위에 Ta-Mo 금속 합금과 Ru-Zr 금속 합금을 Co-sputtering 방법을 이용하여 여러 가지 일함수를 갖는 MOS capacitor를 제작하여 전기적 재료적 특성에 관하여 연구를 하였다. 그 결과 각각의 금속 합금 게이트는 4.1eV 에서 5.1eV 사이의 다양한 일함수를 나타냈으며, $400^{\circ}C$, $500^{\circ}C$, $600^{\circ}C$, $700^{\circ}C$, $800^{\circ}C$ RTA 후의 C-V특성 곡선 및 I-V 측정을 통하여 누설전류를 확인하였다. 그 결과 Ta-Mo 금속 합금의 경우 스퍼터링 파워가 100W/70W에서 NMOS에 적합한 일함수를 가졌으며, Ru-Zr 금속 합금의 경우 스퍼터링 파워가 50W/100W에서 NMOS에 적합한 일함수를 가졌다. 열처리 후의 C-V특성 곡선에서도 정전용랑 값이 거의 변하지 않았으며 평탄 전압의 변화도 거의 없었다. 누설전류 특성에서는 물리적 두께가 비슷한 기존의 $SiO_2$ 절연막에서 실험결과와 비교하여 약 100배 정도 감소되었음을 알 수 있었다. 또한 기존의 실험들에서 나타난 열처리 후의 $ZrO_2$ 절연막과 Si 기판 사이의 Interfacial layer 의 동반 두께 증가로 인한 전기적 특성 저하가 나타나지 않는 줄은 특성을 보여준다.