• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.137-144
• /
• 2005

Recently a pressurized grouting soil nail is demanded due to problems beyond of economical and engineering purpose. In this study, a newly modified soil nailing technology named as the PGSN (Pressurized Grouting Soil Nailing) system is respected to reduced displacements of nails and increase of global slope stability. And effects of various factors related to the design of the PGSN system, such as the length of the soil nail, injected pressure and W/C ratio of cement grout in the pressurized grouting soil nail are examined throughout a series of the displacement-controlled field pull-out tests. Displacement-controlled field pull-out tests are performed in the present study and the volume of grouting are also evaluated based on the measurements. In addition, both short-term and long-term characteristics of pull-out deformations of the newly proposed PGSN system are analyzed and compared with those of the general soil nailing system by carrying out the stress-controlled field pull-out tests. From the pull-out characteristics of pressurized grouting soil nails, it is found that the effect of the length of the soil nail, injected pressure and W/C ratio of cement grout are important parameters.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.4
• /
• pp.163-169
• /
• 1998

The strength and freeze-thaw test were carried out in order to use recycled aggregate as crushed aggregate in concrete. The recycled concrete had a lower flexture and compressive strengths than ordinary concrete, but the inclusion of fly ash shows similar results in both concretes. The resistance of freeze-thaw was strongly influenced by W/C ratio, content of recycled aggregate and fly ash, and it was also found that the resistance was higher when W/C ratio and fly ash content was lower. and was superior when replacement level of recycled aggregate reached to 80%.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.129-133
• /
• 1998

We have studied a relationship between the pattern of complex modulus change versus internal phase volume ratio and the rheological consistency of concentrated W/O emulsions with Magnesium Sulfate in the range 0.0 to 0.5 wt% and with different oil polarities, respectively. The rheological consistency with time of concentrated W/O emulsion was checked using Fudoh Rheometer and the coalescence of deformed water droplets was examined using polarized light microscope(LEICA DMRP). To find the pattern of complex modulus change of the concentrated emulsions versus internal phase volume ratio, the effect of varying water phase volume fraction from 0.78 up to 0.85 on viscoelastic measurements was investigated using rotational rheometer (HAAKE Rheostress RS 50). The rheological consistency was mainly destroyed by the coalescence of the deformed water droplets. The greater the increase of complex modulus was, the less coalescence occurred and the more consistent the concentrated emulsions were. And the pattern of complex modulus increase versus volume ratio has been explained with the resistance to coalescence of the deformed interfacial film of water droplets in concentrated W/O emulsion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.632-635
• /
• 2001

Microcrystalline Si films have been deposited by using five W-wire filaments of 0.5 mm diameter for hot-wire chemical vapor deposition (HWCVD). We compared the HWCVD grown films with the film exposed to transformer couple plasma system for the modification of seed layer. W-wire filament temperature was maintained below 1600$^{\circ}C$ to avoid metal contamination by thermal evaporation at the filament. Deposition conditions were varied with H$_2$dilution ratio, with and without plasma treatment. From the Raman spectra analysis, we observed that the film crystallization was strongly influenced by the H$_2$dilution ratio and weakly depended on the distance between the wire and a substrate. We were able to achieve the crystalline volume fraction of about 70% with an SiH$_4$/H$_2$ratio of 1.3%, a wire temperature of 1514$^{\circ}C$, a substrate separation distance of 4cm, and a chamber pressure of 38 mTorr. We investigated the influence of ${\mu}$c-Si film properties by using a plasma treatment. This article also deals with the influence of the H$_2$dilution ratio in crystallization modification.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.9
• /
• pp.33-44
• /
• 2020

In order to analyze the shear strength characteristics of the grout with sudden gelation in the pre-hardening state, the viscosity of the mixture and the indoor vane shear test were performed. The grout was prepared according to the water-cement (w/c) ratio and the shear strength test was conducted. The plastic-state shear strength of grout was affected by the w/c ratio, so the lower the w/c ratio, the higher the initial shear strength was, and the longer the curing time was, the higher the shear strength was. The maximum shear strength occurred at the faster rotation angle as the higher shear strength was developed, and the lower shear strength occurred at the larger rotation angle. In addition, it was confirmed that the pre-hardening grout rapidly decreased in strength after the maximum shear strength was gained, and converged at a certain level after the rotation angle of the vane blade was about 70° to 90°.

• Microbiology and Biotechnology Letters
• /
• v.37 no.4
• /
• pp.365-370
• /
• 2009

For the production of diglyceride (DG) containing medium chain fatty acid, which could be utilized as a substrate to structured lipid production, monoglyceride (MG) and caprylic acid were reacted in the presence of lipase. The reaction system was well mixed homogeneously without using any organic solvent. Among the lipases investigated, Lipozyme RM IM and Novozym 435 were selected on the basis of equilibrium DG yields from the medium chain fatty acid and MG. And reaction conditions such as addition of molecular sieve, water content of immobilized lipase, reaction temperature, and mole ratio of MG/caprylic acid are optimized to increase DG production by using Lipozyme RM IM. DG content of reaction mixture showed 8% increase by adding molecular sieve to reaction mixture. Removal of water from the immobilized lipase could affect seriously equilibrium content of DG. More than 2.8%(w/w) removal of water from the support could make 44% of DG. Optimum temperature was found to $60^{\circ}C$. Temperature shift from $60^{\circ}C$ to $25^{\circ}C$ resulted in increase of free fatty acid (FFA) content. The equilibrium DG yield was not seriously affected by on MG/caprylic acid molar ratio. However, at the stoichiometric ratio of 1:1 the highest DG yield was obtained. Increasing MG/caprylic acid ratio from 0.3 to 1.8 decreased FFA content from 34% to 13%, while MG content increased from 27% to 50%.

• Journal of the Korean Vacuum Society
• /
• v.7 no.2
• /
• pp.141-149
• /
• 1998

The W thin films were deposited on Si3N4 by a PECVD technique. The effects of substrate temperature and gas flow ratio on the properties of the W films were investigated. The deposition of W films were limited by surface reaction at the temperature range of 150>~$250^{\circ}C$, W films had the deposition rate of 150~530 $\AA$/min and stress of 0.85~$14.35\times10 ^9 \textrm {dynes/cm}^2}$ at various substrate temperatures and $SiH_4/WF_6$ flow ratios. $SiH_4/WF_6$ flow ratio affected the deposition rate and stress of the W films, expecially, excessive flow of SiH4 abruptly changed the structure, chemical bonding, and stress of the W films. Among the deposited W films on TiN, Ti, Mo, NiCr and Al adhesion layer, the one on the Al had the best adhesion property.

• Journal of the Korea Institute of Building Construction
• /
• v.7 no.4
• /
• pp.145-151
• /
• 2007

In this paper, tests are carried out in order to investigate the strength development of concrete under various binder types, W/B and curing temperature ranged from $5{\sim}20^{\circ}C$. Fly ash and blast furnace slag were incorporated by as much as 30%, respectively. Strength development of concrete are estimated using Logistic model and strength ratio of concrete at 28days to that at early age are also investigated. According to experimental results, it is found that good agreements are obtained between measured values and calculated ones using logistic model below $20^{\circ}C$. Strength ratio of concrete at 28days to that at early age increases in case W/B decreases and curing temperature increases. Tables and graphs for strength ratio of concrete are provided in this paper. It is capable of obtaining and predicting the periods to attain design strength by considering increment factor of strength easily with the table and graphs presented in this paper. This paper presents the reference data to decide removal time of form, time to reach target strength and strength inspection of remicon whether the test specimens meet the specified criteria of compressive strength. Multi regression models with respect to the relationship between 7days compressive strength and 28 days compressive strength depending on W/B and admixture types are presented.

• Journal of the Korea Concrete Institute
• /
• v.21 no.1
• /
• pp.55-64
• /
• 2009

This study is aimed to derive the optimum mix proportion of the combined self compacting concrete according to cement types (blast-furnace slag cement and belite cement) and to propose the basic data to field construction work after evaluating the quality properties. Specially, lime stone powder (LSP) as binder and viscosity agent are used in the combined self compacting concrete because slurry wall of an underground LNG storage tank should be kept stability of quality during concrete working. Replacement ratio of LSP is determined by confined water ratio test and main design factors including fine aggregate ratio ($S_r$), coarse aggregate ratio ($G_v$) and water-cement ratio (W/C) are selected. Also, quality properties including setting time, bleeding content, shortening depth and hydration heat on the optimum mix proportion of the combined self compacting concrete according to cement type are compared and analyzed. As test results, the optimum mix proportion of the combined self compacting concrete according to cement type is as followings. 1) Slag cement type-replacement ratio of LSP 13.5%, $S_r$ 47% and W/C 41%. 2) Belite cement type-replacement ratio of LSP 42.7%, Sr 43% and W/C 51%. But optimum coarse aggregate ratio is 53% regardless of cement types. Also, as test results regarding setting time, bleeding content, shortening depth and hydration heat of the combined self compacting concrete by cement type, belite cement type is most stable in the quality properties and is to apply the actual construction work.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.5
• /
• pp.447-454
• /
• 1985

As a part of serial study for comparing lipid components in freshwater fishes, this work was undertaken to compare the lipid components among wild and cultured carp, Cyprinus carpio, and Israeli carp, Cyprinus carpio nudus. The lipid components of cultured carp were analyzed and compared with those of wild and Israeli carp. In the content of total lipid, the lipid content in cultured carp was slightly lower than that in wild one, but similar to that in Israeli carp. The lipid contents in viscera of wild and cultured carp were 2 times higher than those in edible portion, but the lipid content in viscera of Israeli carp showed a similar trend to that in edible portion. In the fatty acid composition of neutral lipid in edible portion, percentages of $C_{18:1},\;C_{18:2},\;C_{18:3},\;C_{22:5}\;and\;C_{22:6}$ in cultured carp wire higher than those in wild one, while percentages of $C_{16:0},\;C_{18:0},\;C_{16:1},\;C_{20:4}\;and\;C_{20:5}$ lower, and percentage of $C_{18:2}$ in Israeli carp was noticeably higher than that in wild and cultured carp. In the case of phospholipid in edible portion, percentages of $C_{18:0},\;C_{18:1},\;C_{18:2},\;C_{18:3}\;and\;_C{22:6}$ in cultured carp were higher than those in wild one, while percentages of $C_{16:0},\;C_{16:1},\;C_{20:4},\;C_{20:5}\;and\;C_{22:5}$ lower. The unsaturation (TUFA/TSFA) of neutral lipid in cultured carp was slightly higher than that in wild one, but slightly lower than that in Israeli carp. In the case of phospholipid, the unsaturation showed a similar trend to that of neutral lipid. The essential fatty acid content(TEFA) of neutral lipid in edible portion of cultured carp was higher than that of wild one, but that in viscera lower. In the case of phospholipid in edible portion, the essential fatty acid content in Israeli carp was slightly higher than that in wild and cultured carp, and that in wild one was higher than that in cultured one. The w3 highly unsaturated fatty acid contents(w3 HUFA) of neutral lipid almost showed a similar trend to the essential fatty acid contents in wild and cultured carp, and Israeli carp. In the case of phospholipid, the w3 HUFA in Israeli carp was considerably higher than those in cultured and wild carp. In the ratio (A/C) of fatty acid content(A) in cultured carp to that(C) in diet, the A/C ratios of $C_{20:5}\;w3(0.12),\;C_{22:5}\;w6(0.53),\;C_{22:5}\;w3(0.68)\;and\;C_{22:6}\;w3(0.26)$ were much lower and in the ratio (B/C) of fatty acid content (B) in Israeli carp, the B/C ratios of $C_{18:3}\;w3(0.61),\;C_{20:5}\;w3(0.11),\;C_{22:4}\;w6(0.16),\;C_{22:5}\;w6(0.07)\;and\;C_{22:6}\;w3(0.79)$ were also lower than the other fatty acid. Consequently, it is considered that the ratios of w3 HUFA is related to the biosynthesis of polyenoic acid and growth rates of cultured and Israeli carp.