• 제목/요약/키워드: W/C ratio

검색결과 1,772건 처리시간 0.032초

110dB, 3-mW 4차 단일비트 시그마 델타 모듈레이터 (A 110dB, 3-mW Fourth-order ${\Sigma}-{\Delta}$ Modulator for high accuracy measure systems)

  • 김태윤;박원기;민경원;최종찬;이성철
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.609-610
    • /
    • 2008
  • In this paper, a 110 dB, 1.024 MHz fourth-order single-loop Delta-Sigma sigma modulator has been presented with an over-sampling ratio of 128 and an overload factor of -6 dB for a bandwidth of 4 kHz. In particular, this ${\Sigma}-{\Delta}$ modulator is well suited for high accuracy measure systems. The whole modulator consumes only 3-mW from a single 3.3V supply in a $0.35-{\mu}m$ CMOS technology.

  • PDF

The Effect of Plasma Power on the Composition and Microhardness of a-SiC:H Films Grown by PECVD

  • Lee, Young-Ku-K;Kim, Yunsoo
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 1999년도 제17회 학술발표회 논문개요집
    • /
    • pp.123-123
    • /
    • 1999
  • Amorphous hydrogenated silicon carbide (a-SiC:H) films were deposited at the temperature of 40$0^{\circ}C$ using plasma enhanced chemical vapor deposition. The a-SiC:H films were characterized by x-ray photoelectron spectroscopy (XPS) and nanoindentation method. By increasing the plasma power from 20W to 160W, the oxygen content of the a-SiC:H films were observed to decrease from 12.1% to 4.4%. On the other hand, the plasma power did not affect the ratio of carbon to silicon in our experiment where the 1, 3-disilabutane was used as the precursor. Microhardness of the films was observed to increase as the plasma power increased, while the elastic modulus was observed to gave a maximum value at the plasma power of 80W. Microhardness of the film is thought to be strongly affected by the content of adventitious oxygen in the film and it is concluded that the hardness of the film can be improved by increasing the plasma power.

  • PDF

밀기울을 첨가한 토하젓의 숙성과정 중 영양성분의 변화 (Changes in Nutritional Components of Toha-jeot with Wheat Bran during Fermentation)

  • 박영희;박복희
    • 한국가정과학회지
    • /
    • 제3권2호
    • /
    • pp.77-89
    • /
    • 2000
  • In this study, to activate the industrialization and to improve the quality of Toha-jeot by shortening the fermentation period, we investigated the changes in the nutritional components of Toha-jeot. salt-fermented Toha shrimp( Caridina denticulata denticulata $D_{E}$ $H_{AAN}$) which was salted with a low-salt group and high-salt group during fermentation. In this experiment. there are four groups of Toha-jeot which were manufactured with 15% ratio of common salt: the first group containing 2% wheat bran (w2%-L). the second high-salt group containing 2% wheat bran( w2%-H) , the third low-salt group containing 4% wheat bran (w4%-L) and the last high-salt group containing 4% wheat bran(w4%-H). These four groups were refrigerated at 4${\pm}$1$^{\circ}C$ and then taken out for analysis at three month intervals during 9 month. Among the free amino acid contents in Toha-jeot, 22 kinds were detected. 6 month after the fermentation when the quantity of the amino acid contents in Toha-jeot is highest, ornitine, glutamic acid, leucine. alanine. lysine and valine occupy the majority, in the order of abundance. In cases of nucleotides. 6 month after the fermentation. from the groups w2%-L, w2%-H and w4%-L, inosine and IMP were not detected. and hypoxanthine, AMP, ADP were detected but 9 month after the fermentation ADP was not detected. The main constituents of fatty acid were as follows : (a) from w2%-L, w2%-H, 6 month after the fermentation. $C16:0$, $C12:0$, $C18:1$, $C18:3$, and $C16:1$. (b) from w4%-L. 6 month after the fermentation, $C18:3$, $C16:0$, $C12:0$ and $C18:1$. (c) from W4%-H, $C16:0$, $C12:0$, $C18:3$ and $C18:1$. In case of mineral contents. Na, Ca. K. Mg, Fe. Zn, Mn and Cu were detected according to the magnitude of the quantity. From the group w4%-H, high quantity of Na was detected during the total fermentation period. In case of color value, from the groups w2%. the values of L. a. b were highest after 6 month fermentation and were decreased after 9 month fermentation, while from groups w4%, the values of L, a, b were gradually decreased after 3 month fermentation.ion.

  • PDF

화학 결합 종류에 따른 생활 용품 기반 마찰 발전기 거동 연구 (Investigation on Behaviors of Triboelectric Nanogenerators Based on Life Supplies according to Kinds of Chemical Bonding)

  • 황희재;최동휘;최덕현
    • Composites Research
    • /
    • 제32권6호
    • /
    • pp.307-313
    • /
    • 2019
  • Triboelectric nanogenerators (TENGs)는 정전기 기반의 마찰 전기 발전기로써 간단한 구조로 저비용, 대면적으로 손쉽게 활용할 수 있는 기술이다. 본 연구에선 생활 용품을 활용하여 화학적 결합 및 SEM image로써 분석을 하고 C-C/C-H/C-O/C=O bonding에 따라 bonding 조성비에 따라 C-C bonding의 비율이 클수록 음전하, C-H bonding 비율이 클수록 양전하 대전체가 되는 것을 확인하였다. 그러한 특성을 가지고 최적 생활용품을 활용하여 정전 출력 실험을 했을 때 최대 210 V, 14.6 ㎂, 9.83 mW의 출력을 얻었다. 최종적으로, 랩과 마그네틱 노트를 이용해 97개의 Light Emitting Diodes (LEDs)를 점등할 수 있었다.

개별 Reflector를 이용한 100W RGBY LED 투광기 개발 (Development of 100W RGBY flood lighting system using separate reflector)

  • 김기훈;박정욱;김영우;김진홍;천우영;송상빈
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2008년도 추계학술대회 논문집
    • /
    • pp.157-160
    • /
    • 2008
  • 색온도 및 광색 가변형 100W RGBY LED 투광기를 개발하기 위하여, 투광기의 광학 및 방열기구를 설계하였다. 또한 100W LED 광원모듈을 구동하기 위한 구동회로와 색온도 및 광색 가변을 위한 제어회로를 개발하였다. 이와 같은 설계결과를 적용하여 100W RGBY 투광기의 시제품을 제작하였고, 시제품의 광학적 성능은 협각 $20^{\circ}$, 중각 $50^{\circ}$, 광각 $75^{\circ}$이상을 만족시켰다. 또한 색온도의 변화는 CIE 1931 색좌표에서 흑체궤적과 일치하여 $2,000K{\sim}10,000K$까지 변화하도록 R,G,B,Y LED의 Duty Ratio를 설정하였다. 또한 방열 특성은 100W 구동시 녹색 LED의 온도는 $37{\sim}41.3^{\circ}C$, heatsink의 온도는 $34{\sim}35^{\circ}C$에서 동작되도록 하였다.

  • PDF

Calciumsilicate의 생성반응에 미치는 $SO_3$ 영향(III) (Effect of $SO_3$ on Calciumsilicate Formation(III))

  • 임은극;박병철
    • 한국세라믹학회지
    • /
    • 제21권3호
    • /
    • pp.221-230
    • /
    • 1984
  • In this study an investigation was made to determine optimum ratio between $SO_3$, MgO and $K_2O$ that maximizes $C_2S$ formation in Clinkering reaction Using response surface analysis method. It was proved that 1) Residual $K_2O$ int he clinker should be converted to $K_2SO_4$ because $K_2SO_4$ has less effect on the burnability than $K_2O$, 2) Optimum ratio if $SO_3$/K2O is 1.5, 3) Optimun balance between $CaSO_4$ and MgO is to be adjusted to such a level that w/o SO3=0.7(w/o MgO-2).4) In case of lack of $K_2O$ free CaO was minimized when $K_2SO_4$=2.3w/o and MgO=1.5w/o but if remaining $K_2O$ was 2w/o free CaI was minimized in the level that $K_2SO_4$=2.3w/o and MgO =1.5 w/o but if remaining $K_2O$ was 2 w/o free CaO was minimized in the level that $K_2SO_4$=4.5w/o and MgO =3.0 w/o.

  • PDF

RF 마그네트론 스퍼터링법에 의해 증착된 SrBi$_2$$Nb_2$>$O_9$ 박막의 전기적 특성에 관한 연구 (Electrical Properties of SrBi$_2$$Nb_2$>$O_9$ Thin Films deposited by RF Magnetron Sputtering Method)

  • 조금석;최훈상;이관;최인훈
    • 한국재료학회지
    • /
    • 제11권4호
    • /
    • pp.290-293
    • /
    • 2001
  • 세라믹 타겟인 Sr$_2$Nb$_2$O$_{7}$ (SNO)과 Bi$_2$O$_3$을 장착한 RF-마그네트론 스퍼터링을 이용하여 SrBi$_2$Nb$_2$O$_{9}$ (SBN) 박막을 p-type Si(100) 기판 위에 증착하였다. 증착시 두 타겟의 파워비를 조절하여 조성의 변화에 따른 SBN 박막의 구조적 및 전기적 특성을 조사하였다. 증착된 SBN 박막은 $700^{\circ}C$의 산소분위기에서 1시간 동안 열처리를 하였으며 상부전극으로 Pt를 증착한 후 산소분위기에서 30분 동안 $700^{\circ}C$에서 전극 후열처리를 실시하였다. 증착된 SBN 박막은 $700^{\circ}C$ 열터리 후에 페로브스카이트 상을 나타냈으며 SNO 타겟과 Bi$_2$O$_3$타겟의 파워가 120 W/100 W 일 때 가장 좋은 전기적 특성을 나타내었다. 이때의 조성은 EPMA(Electron Probe X-ray Micro Analyzer) 분석을 통하여 확인하였으며 Sr:Bi:Nb의 비가 약 1:3:2임을 나타내었다. 이러한 과잉의 Bi조성을 가진 SBN 박막은 3-9 V의 인가전압에서 1.8 V-6.3 V의 우수한 메모리 윈도우 값을 나타내었으며 누설전류 값은 인가전압 5 V에서 1.54$\times$$10^{-7}$ A/$\textrm{cm}^2$였다.

  • PDF

습윤상태의 피복두께와 물-시멘트비를 고려한 반전위와 철근 부식량의 상관성 (Relationship between Half Cell Potential and Corrosion Amount Considering Saturated Cover depth and W/C ratios in Cement Mortar)

  • 류화성;박재성;권성준
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제21권3호
    • /
    • pp.19-26
    • /
    • 2017
  • 콘크리트는 다공성 건설재료이며, 매립된 철근의 부식은 내구성 및 안전성에 큰 영향을 미친다. 본 연구는 비파괴 검사인 반전위측정값과 생성된 부식량과의 상관성을 피복두께, 물-시멘트비를 고려하여 도출하는 것이다. 이를 위해, 3가지 수준의 물-시멘트비와 4가지 수준의 피복두께를 가진 시멘트 모르타르 시편이 제조되었으며, 3가지 수준의 촉진부식기간을 고려하여 부식량 및 반전위를 측정하였다. 습윤상태에서는 반전위가 크게 증가하였으며, 부식량과 촉진기간은 선형적인 관계를 가지고 있었다. 부식량이 증가할수록, 피복두께가 감소할수록, 물-시멘트비가 증가할수록 반전위는 증가하였다. 전체의 반전위 측정값을 부식량과 비교할 경우 0.67의 낮은 결정계수를 가지고 있었으나 부식량(촉진기간)을 고려하여 3가지 수준을 고려할 경우 0.90이상의 높은 결정계수를 가지고 있었다. 실내조건과 같이 온도가 일정하고 포화상태일 경우, 측정된 반전위는 부식량과 선형적인 상관성을 가지고 있었으며, 피복두께, 물-시멘트비, 철근직경, HCP의 측정범위를 알 수 있다면, 매립된 철근의 부식량을 예측할 수 있다고 판단된다.

초음파 C-Scan을 이용한 구조용 세라믹스의 기계적 특성평가 (Evaluation of Mechanical Properties of Structural Ceramics ($Al_{2}O_{3}$) Using the High Frequency Ultrasonic C - Scan)

  • 장영권
    • 비파괴검사학회지
    • /
    • 제9권2호
    • /
    • pp.18-24
    • /
    • 1989
  • Computer-aided high frequency ultrasonic is applied to aluminum oxide(85w%, 94w%, 96w%, and 99w%) MOR(modulus of rupture) samples to evaluate mechanical properties such as density variation, pore content, elastic modulus, shear modulus, and poisson's ratio. Ultrasonic wave velocity and attenuation measurement techniques were used as an evaluator of such properties. Pulse-echo C-Scan images with different fate setting method using 50MHz center frequency 1 inch focal length transducer allows evaluation of density variation and pore content. Elastic modulus calculated with the relation of density and ultrasonic velocity. It shows good reliability as compared with resonance method. Sintered density variation of $0.025g/cm^{3}$, that is 0.6% of theoretical density in $Al_{2}O_{3}$ samples can be observed by ultrasonic velocity measurement. Attenuation measurement method qualitatively agree with 4-point fracture testing result concerning of porosity content.

  • PDF

고령자 친화 딸기 젤리 개발 및 저장수명 결정 (Development and shelf-life determination of senior-friendly strawberry jelly)

  • 김지현;민세철
    • 한국식품과학회지
    • /
    • 제49권2호
    • /
    • pp.181-185
    • /
    • 2017
  • 설탕 또는 잔탄검의 함량이 증가함에 따라 딸기 젤리의 경도, 검성, 그리고 씹힘성이 상승하는 경향을 보였다. 딸기 젤리의 텍스처는 딸기 주스의 함량에 따른 경향성을 보이지 않았다. 고령자 친화 젤리에 알맞은 경도(1.3 N)를 가지도록 최적화된 딸기 젤리의 제형은 딸기 주스 함량 40.0%, 설탕 함량 10.0%, 그리고 잔탄검/로커스트콩검의 비율 1.5였다. 모든 저장 온도에서 젤리의 경도, 검성, 그리고 씹힘성은 증가하였고, 명도는 감소하였다. $15^{\circ}C$에서는 저장 일자가 길어질수록 황색화가 증가하였다. 경도를 품질지표로 선정하여 예측하였을 때 $5^{\circ}C$$15^{\circ}C$에서의 젤리의 저장수명은 각각 38일과 26일이었다. 본 연구를 통해 냉동 딸기를 이용하여 고령자 친화 딸기 젤리를 개발하였고 제품의 저장 중 품질 특성과 저장수명을 예측할 수 있었다.