• 천문학회지
• /
• 제38권2호
• /
• pp.257-260
• /
• 2005

We have mapped the W 3 giant molecular cloud in the $C^o\;^3P_1-^3 P_o$ ([CI]) line with the Mount Fuji Submillimeter-wave Telescope. The [CI] emission is extended over the molecular cloud, having peaks at three star forming clouds; W 3(Main), W 3(OH), and AFGL 333. The [CI] emission is found to be strong in the AFGL 333 cloud. We have also observed the $C^{18}O,\;CCS,\;N_2H^+$, and $H^{13}CO^+$ lines by using the Nobeyama Radio Observatory 45 m telescope. In the AFGL 333 cloud, we find two massive cores, which are highly gravitationally bound and have no sign of active star formation. The high [$C^o$]/[CO] and [CCS]/[$N_2H^+$] abundance ratios suggest that the AFGL 333 cloud is younger than the W 3(Main) and W 3(OH) clouds.

• 한국주조공학회지
• /
• 제17권5호
• /
• pp.480-487
• /
• 1997

Particle reinforced metal matrix composites(MMCs) via a centrifugal spray-cast deposition(CSD) process were fabricated by injecting second phase particles($Al_2O_3$<40${\mu}m$, W<17.3${\mu}m$) into copper melt on the atomizing disc. Compositing modes were investigated by combining microstructures and mathematical modeling between Cu droplets and the reinforced particles injected. The $Cu/W_P$ powders were shown that the W particles penetrate and get embedded in the Cu droplets. It is considered that the W particles composite preferentially in Cu melt on the atomizing disc. On the other hand, the $Al_2O_3$, particles did not penetrate into the Cu droplets on the atomizing disc but get attached in surface of Cu droplets during the flight. It is considered that the compositing may be attained in the flight distance which the relative velocity between Cu droplet and $Al_2O_3$, particle is maximum. The microstructure of the $Cu/W_P$ and the $Cu/(Al_2O_3)_p$ composite preform was strongly influenced by compositing modes of droplets, and after subsequent deposition it was comprised as it is called the dispersed type and the cell type of microstructure, respectively.

• 대한화장품학회지
• /
• 제20권1호
• /
• pp.64-81
• /
• 1994

유화제로 polyoxyethylene(20)sorbitan monostearate, sorbitan sesquioleate을 혼합 사용하고, 분산상으로 liquid paraffin, 연속상으로 deionized water를 원료로 사용하여 Direct유화법을 이용한 전상법과 Invert유화법을 3가지 단계의 제조방법으로 나누어서 O/W에멀젼을 제조하였고, 각 단계 전상유화법에서 첨가되는 물의 양에 따른 최종 O/W에멀젼의 입자크기변화를 관찰하였다. Direct유화법을 이용한 2단계 전상유화법을 사용하여 제조한 결과, 미세하고 균일한 입자를 갖는 O/W에멀젼은 W/O에서 (W/O)W 이중에멀젼으로의 전환 단계를 거쳐야만 생성됨을 알 수 있었다. Invert유화법을 사용한 3단계전상유화법은 W/O 에서 일종의 Pseudomicroemulsion gel상을 거쳐 미세하고 균일한 O/W유화 입자가 얻어졌다. 3단계 전상법이 2단계 전상법보다 더 미세하고 균일한 입자를 생성하였다. 실험에서 사용한 모든 유화법에서 혼합유화제의 HLB가 10.0 - 10.8 영역에서 가장 미세한 에멀젼입자가 형성되었다. 이 HLB영역에서 혼합유화제가 용해되어있는 오일상에 첨가되어 가용화되는 물의 양이 최대로 많았으며, 최대 가용화 물양을 갖는 유화제의 조성에서 가장 미세하고 균일한 입자가 얻어졌다.

• 한국자기학회지
• /
• 제6권6호
• /
• pp.382-387
• /
• 1996

본 연구에서는 ${(Ni_{x}Cu_{0.2}Zn_{0.8-x}O)}_{1-w}{(Fe_{2}O_{3})}_{1+w}$의 Ni 함량(x)과 $Co_{3}O_{4}$ 첨가량에 따른 복소투자율 변화에 관하여 검토하였다. Ni 함량 x=0.6 이상에서는 매우 좁은 투자율 허수항($\mu$") 피이크가 형성됨으로서 다른 조성에 비해 손실이 적음을 알 수 있었고 공명주파수($f_{\mu"max}$)는 Ni 함량의 변화와 비례하여 현저하게 증가하였다. $Fe_{2}O_{3}$ 결핍량(w)이 많을 수록 $\mu$" 값은 낮았으나, $Fe_{2}O_{3}$ 결핍량(w)의 변화가 공명주파수에는 큰 영향을 미치지 않는 경향을 나타내었다. NiCuZn 페라이트 조성에 대하여 $Co_{3}O_{4}$를 첨가한 경우는 첨가량이 많아짐에 따라 초기투자율이 감소하여 $f_{\mu"max}$ 값은 증가하였으나, 전체적인 손실의 정도를 제어하는데에는 Ni 함량을 변화시키는 것이 더 효과적임을 알 수 있었다.

• 한국세라믹학회지
• /
• 제20권1호
• /
• pp.19-24
• /
• 1983

Dielectrics used as capacitor was studied in the system of $Pb(MgW)_{0.5} O_3-PbTiO_3-PbZrO_3$ Curie tempera-tures of $PbTiO_3 PbZrO_3$ and $Pb[MgW]_{0.5} O_3$ were 49$0^{\circ}C$ 23$0^{\circ}C$ and 39$0^{\circ}C$ respectively. When these materials formed solid solution the more amount of $Pb(MgW)_{0.5}O_3$ was increased the more Curie temperature lowered and dielectric constant increased. Higher dielectric constants were measured in the solid solution of which X-Ray diffraction patterns were changed. Especially Curie temperature and dielectric constant were 85$^{\circ}C$ and 4159 respectively in the composition of 60 $Pb(MgW)_{0.5}O_3-30 PbTiO_3-10PbZrO_3$. Also in this composition ferroeletric material with thermal stability was obtained.

• 소성∙가공
• /
• 제27권1호
• /
• pp.48-53
• /
• 2018

Aluminum nitride (AlN) is used by the semiconductor industry that has requirements for high thermal conductivity. The theoretical thermal conductivity of single crystal AlN is 320W/mK. Whereas, the values measured for polycrystalline AlN ceramics range from 20 W/mK to 280 W/mK. The variability is strongly dependent upon the purity of the starting materials and non-uniform dispersibility of the sintering additive. The conventional AlN sintering additive used yttria ($Y_2O_3$), but the dispersibility of the powder in the mixing process was important. In this study, we investigated the mechanical and thermal conductivity of yttrium nitrate ($Y(NO_3)_3{\cdot}6H_2O$), as a sintering additive in order to improve the dispersibility of $Y_2O_3$. The sintering additives content was in the range of 2 to 4.5wt.%. The density of AlN gradually increased with increasing contents of sintering additive and the flexural strength gradually increased as well. The flexural strength of the sintered body containing 4 wt% of $Y_2O_3$ and $Y(NO_3)_3{\cdot}6H_2O$ was 334.1 MPa and 378.2 MPa, respectively. The thermal conductivities were 189.7W/mK and 209.4W/mK, respectively. In the case of hardness, there was only a slight difference and the average value was about 10 GPa. Therefore, densification, density and strength values were found to be proportional to its content. It was confirmed that AlN using $Y(NO_3)_3{\cdot}6H_2O$ displayed relatively higher thermal conductivity and mechanical properties than the $Y_2O_3$.

• 한국대기환경학회지
• /
• 제3권1호
• /
• pp.1-12
• /
• 1987

A series of supported sulfided Ni-W/$\gamma-Al_2O_3$ and Co-W/$\gamma-Al_2O_3$ catalysts with different nickel and cobalt contents were studied in the hydrodenitrogenation of pyridine dissolved in n-heptane. The ranges of experimental conditions were at the temperatures between 453 and 753 K, and the pressures between 30 and 50 Bar. The catalytic activities with different nickel and cobalt contents were shown to be maximum at Ni/Ni+W = 0.2 - 0.3, Co/Co+W = 0.3 - 0.4. Pyridine conversion increased with pressure and temperature and the step of piperidine formation was found to be irreversible. The reaction orders in Ni-W/$\gamma-Al_2O_3$ and Co-W/$\gamma-Al_2O_3$ catalysts were the first with respect to pyridine and reaction rate constants decreased with increase of initial pyridine concentration and their activation energies were 12.98 and 9.23 kcal/mol, respectively.

• 수산해양교육연구
• /
• 제24권2호
• /
• pp.234-245
• /
• 2012

This study aims to analyze the factors of the extra-curricula area in personal school performance record and propose the practical strategies for entrance examination affairs on this area. To address this goal, we have applied a SWOT analysis with related documents and research results. We found out five strengths: (S1) Link the students' experience to right people for the university, (S2) Quantitative Indicators, (S3) Qualitative Indicators, (S4) Link to other evaluation factors, and (S5) Analysis of Human Resource. The weakness included: (W1) Fairness, (W2) Reliability, (W3) Difficulties to set standards, (W4) Difficulties to set environments, and (W5) Lack of systemic experience of an evaluation. We also discovered five opportunities (O1) Recognition of public education, (O2) The need of national support, (O3) The importance of autonomy, (O4) Specialization, and (O5) Networks. Finally, threat factors consisted of: (T1) Frequent change of educational policy, (T2) Increasing of private education, (T3) Lack of information and preparation time, and (T4) The accuracy and reliability of personal school records. Based on these results, we suggested practical strategies with these four dimensions: S-O, W-O, S-T, and W-T.

• 한국항공우주학회지
• /
• 제37권12호
• /
• pp.1245-1251
• /
• 2009

고온/고압, 장시간 연소조건에서 비삭마에 가까운 삭마 특성을 갖는 초소형 목삽입재 선정을 위한 연구를 수행하였다. 평가 소재로서 C/SiC, CIT, W/$Y_2O_3$를 선정하였으며, 연소시간 20초의 내열성능평가모타로 시험하였다. 시험 결과 W/$Y_2O_3$가 가장 우수하였으나, 균열이 발생하였다. 본 연구를 통하여 각 소재들의 열반응 특성 및 내열 성능을 이해할 수 있었으며, W/$Y_2O_3$의 적용가능성을 확인하였다.

• 한국재료학회지
• /
• 제14권9호
• /
• pp.649-654
• /
• 2004

In this paper, the fracture toughness and mechanisms of failure in a random SiC-whisker/$Al_{2}O_3$ ceramic composite were investigated using in situ observations during mode I(opening) loading. $SiC_{w}/Al_{2}O_3$ composite was obtained by hot press sintering of $Al_{2}O_3$ powder and SiC whisker as the matrix and reinforcement, respectively. The whisker and powder were mixed using a turbo mill. The composite was produced at SiC whisker volume fraction of $0.3\%$. Compared with monolithic $Al_{2}O_3$, fracture toughness enhancement was observed in $SiC_{w}/Al_{2}O_3$ composite. This improved fracture toughness was attributed to SiC whisker bridging and crack deflection. $SiC_{w}/Al_{2}O_3$ composite exhibited typically brittle fracture behavior, but a fracture process zone was observed in this composite. This means that the load versus load-line displacement curve of $SiC_{w}/Al_{2}O_3$ composite from a fracture test may involve a small non-linear region near the peak load.