• 한국항해항만학회지
• /
• 제34권6호
• /
• pp.429-434
• /
• 2010

해양의 다양한 환경에 노출된 선체 표면의 거칠기를 일반화 하여 모델 실험을 PIV기법을 적용하여 회류수조에서 수행하였다. 모델의 유동방향 표면 거칠기의 폭에 기초하여 본 연구에 적용된 레이놀즈수 Re=1.0$\times$103에서 유동가시화, 시간평균 속도장 및 와도장을 상호 평가를 통하여 유동특성을 조사하였다. 와의 생성과 소멸 메커니즘을 통해 와류의 중심은 표면 거칠기 높이의 0.5H로 나타났다. 또한 거칠기 계수가 증가함에 따라 와의 크기와 비례하고, 와의 생성위치도 상부와 전방으로 이동하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제2권1호
• /
• pp.12-19
• /
• 2001

Study of turbulent mixing layers has been a popular subject from the point of view of both practical application and phenomenological importance in engineering field. Turbulent mixing layers can be applied in many fields where rapid transition to turbulence is desirable in order to prevent boundary layer separation or to enhance mixing. The ability to control mixing, structure and growth of the shear flow would obviously have a considerable impact on many engineering applications. In addition to practical applications, free shear flows are one of the simplest flows to understand the fundamental mechanism in the transition process to turbulence. After the discovery of large-scale vortical structure in free shear flows many researchers have investigated the physical mechanism of generation and dissipation processes of the vortical structure. This study investigated the role of the large-scale vortical structures in the turbulent mixing layer using LES(Large-Eddy Simulation). The result shows that the pairing interaction of the vortical structure plays an important role in the growth rate of a mixing layer. It is found that the turbulence quantities depend strongly on the velocity ratio. It is also found that the vorticity in the high-velocity-side can extract energy from the mean flow, while the vorticity in the low-velocity-side lose energy by the viscous dissipation. Finally the results suggest the guideline to obtain the desired flow by control of the velocity ratio.

• 대한조선학회논문집
• /
• 제28권2호
• /
• pp.118-131
• /
• 1991

자유수면 근처에서의 박리유동 현상을 수치 시뮬레이션 방법과 유선 가시화 시험 방법으로 연구하였다. 수치 시뮬레이션은 물체표면에서 유기되고 확산(diffusion) 및 대류(convection)에 의해 유동중으로 박리되어 방출되는 보오티시티(vorticity)를 다수의 보오텍스로 치환하여 유동의 변화와 유체력을 구하는 보오텍스블럽 법을 사용하여 수행하였다. 이 방법으로 대규모의 와류의 생성 및 변화를 추정할 수 있으며 또한 자유수면과 와류유동의 상호간섭현상 그리고 동 유체력 등을 추정할 수 있었다. 유선 가시화 시험은 해사기술연구소의 공동수조에서 수행하였으며, 직류 전원에 의해 얻어진 수소기포를 가시화 입자로 이용하였다. 조명장치는 할로겐 램프를 이용하였고, 연속사진을 가시화의 결과로 사용하였다. 또한 자유수면의 시간적 공간적 변화를 파고계를 이용하여 계측하고 이로부터 와류유동의 변화 주기를 추정하였다.

• 대한조선학회논문집
• /
• 제45권6호
• /
• pp.620-630
• /
• 2008

The characteristics of complicated propeller wake influenced by hull wake are investigated by using a two-frame PIV (Particle Image Velocimetry) technique. As the propeller is significantly affected by the hull wake in a real marine vessel, the measurements of propeller wake under the hull wake would be certainly necessary for more reliable validation and the prediction of numerical simulation with wake modeling. Velocity field measurements have been conducted in a medium-size cavitation tunnel with a hull wake. Generally, the hull wake generated by the boundary layer of ship's hull produces the different loading distribution on the propeller blade in both upper and lower propeller planes. The difference of the propeller wake behaviors caused by the hull wake is discussed in terms of axial velocity, vorticity and turbulence kinetic energy distribution in the present study.

• Wind and Structures
• /
• 제2권4호
• /
• pp.285-303
• /
• 1999

A discrete vortex method (DVM) has been developed at the Department of Aerospace Engineering, University of Glasgow, to predict unsteady, incompressible, separated flows around closed bodies. The basis of the method is the discretisation of the vorticity field, rather than the velocity field, into a series of vortex particles that are free to move in the flow. This paper gives a brief description of the method and presents the results of calculations on static and transversely oscillating square section cylinders. The results demonstrate that the method successfully predicts the character of the flow field at different angles of incidence for the static case. Vortex lock-in around the resonance point is successfully captured in the oscillatory cases. It is concluded that the vortex method results show good agreement, both qualitatively and quantitatively, with results from various experimental data.

• 설비공학논문집
• /
• 제13권7호
• /
• pp.595-601
• /
• 2001

We applied PIV method to obtain instantaneous and ensemble averaged velocity fields from the first row to the fifth row of a staggered tube bundle. The Reynolds number based on the tube diameter and the maximum velocity was set to be 4,000. Remarkably different natures are observed in the developing bundle flow. Such differences are depicted in the mean recirculating bubble length and the vorticity distributions. The jet-like flow seems to be a dominant feature after the second row and usually skew. However, the ensemble averaged fields show symmetric profiles and the flow characteristics between the third and fourth measuring planes are not so different. comparison between the PIV data and the RANS simulation yields severe disagreement in spite of the same Reynolds number. It can be explained that the distinct jet-like unsteady motions are not to be accounted in th steady numerical analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권5호
• /
• pp.679-685
• /
• 2009

In order to simulate a smoke or poisonous gas emergency in a rectangular tunnel and to investigate a better way to exhaust the smoke, the characteristics of smoke flow have been analyzed using flow field data acquired by Particle Image Velocimetry(PIV). Olive oil has been used as tracer particles with the kinematic viscosity of air, $1.51{\times}10^{-5}\;m^2/s$. The investigation has done in the range of Reynolds number of 1600 to 5333 due to the inlet velocities of 0.3 m/s to 1 m/s respectively. The average velocity vector and instantaneous kinematic energy fields with respect to the three different Reynolds numbers are comparatively discussed by the Flow Manager. In general, the smoke flow becomes more disorderly and turbulent with the increase of Reynolds number. Kinematic energy in the measured region increases with the increase of Reynolds number while decreasing at the leeward direction about the outlet region.

• 한국분무공학회지
• /
• 제4권4호
• /
• pp.38-45
• /
• 1999

The near field structure of round turbulent jets with initially asymmetric velocity distribution is investigated experimentally. Experiments were carried out using a constant temperature hot-wire anemometry system to measure streamwise velocity in the jets. The measurements were undertaken across the jet at various streamwise stations in a range starting from the jet exit plane and up to a downstream location of twelve diameters. The experimental results include the distribution of mean and instantaneous velocities, vorticity field, turbulence intensity, and the Reynolds shear stress. The asymmetry of the jet exit plane was obtained by using circular cross-section pipes with a bend at the upstream of the exit. Three pipes were used for this study: A straight pipe, 90 and 160 degree-bended pipes. Therefore, at the upstream of the pipe exit, the secondary flow through the bend and the mean streamwise velocity distribution could be controlled by changing the curvature of pipes.

• 한국안전학회지
• /
• 제10권2호
• /
• pp.56-63
• /
• 1995

A simulation of contaminant dispersion in a water reservoir has been done using 2-D finite difference method(FDM). The steady state velocity field of the reservoir was computed using stream function-vorticity formulation of Wavier-Stokes equation and continuity equation. Based on the computed steady state velocity field, the transient convective diffusion equation of the contaminant dispersion was computed. For the 1m$\times$1m reservoir model with inlet and outlet attached, it was shown that the center of circulation located toward right. For the numerical values of v =0.01($\textrm{cm}^2$/s) and D=0.6($\textrm{cm}^2$/s) and the flow of 50($\textrm{cm}^3$/s ), it was determined that the outflow had to be shut down in 18 seconds to prevent from severe pollution. Also the required time was computed to be 6 seconds for the inflow of 100 ($\textrm{cm}^3$/s). The result of this study is considered, hopefully, to be useful for the design of the water reservoir systems that are the subjects to various contamination.

• 한국추진공학회지
• /
• 제16권4호
• /
• pp.50-56
• /
• 2012

벤트 혼합기는 혼합기 후류에 존재하는 재순환 영역으로 공기를 유입시켜 연료-공기 혼합을 증대시키는 혼합기이다. Stereoscopic PIV기법을 통해 얻은 3차원 속도, 와류, 난류운동에너지를 토대로 계단형 혼합기를 기본 모델로 하여 벤트 혼합기의 성능을 분석하였다. 벤트 혼합기는 두터운 전단층으로 인해 높은 침투거리를 보였으며, 난류운동에너지는 주로 주유동과 제트유동의 경계면을 따라 분포하였다. 이 난류 영역은 혼합영역 내에서 활발히 물질전달을 일으키며, 혼합 증대를 가져온다.