• 한국해양공학회지
• /
• 제14권2호
• /
• pp.36-43
• /
• 2000

In this paper a Vortex Lattice Method is used to predict the performances of a contra-Rotating Propeller. Greeley and Kerwin's(1982) wake model is adopted instead of the exact trailing vortex geometry. The interaction of the two propellers is treated by the sense that the induction of one propeller upon the other propeller is averaged in the circumferential direction . Two single propellers (DTRC 4119 & DTRC 4842) are chosen and compared with the experimental and other numerical results published. Then the computational results for three CRP's (4-0-4 CRP(DTRC 3686+DTRC 3687A) 4-0-5 CRP(DTRC 3686+DTRC 3849) & DTRC CRT(DTRC 5067+DTRC 5068) are compared with the experimental and numerical results published. The interaction of both propellers by the change of inflow velocity and circulation of each propeller is investigated.

• 대한기계학회논문집B
• /
• 제26권1호
• /
• pp.82-93
• /
• 2002

The effects of the interaction between the flow and temperature field and a boundary layer due to a variety of the height of a vortex generator are experimentally investigated. The test facility consists of a boundary-layer wind tunnel with the vortex generator protruding from the bottom surface. In order to control the strength of the longitudinal vortices, the angle of attack and the spacing distance of the vortex generator are 20 degree and 40 mm, respectively. The height of the vortex generator (H) is 15 mm, 20 mm and 30 mm and the cord length of it is 50 mm. Three-component mean velocity measurements are made using a 5-hole probe system and the surface temperature distribution is measured by the hue capturing method using thermochromatic liquid crystals. By using the method mentioned above, the following conclusions are obtained from the present experiment. The boundary layer is thinned in the downwash region where the strong downflow and the lateral outflow of the boundary layer fluid occur and thickened in the upwash re,3ion where the longitudinal vortex sweeps low momentum fluid away from the bottom surface. In case that the height of the vortex generator increases, the averaged circulation and the maximum vorticity of the vortex pair decrease. The contours of the non-dimensional temperature show the similar trends fur all the cases (H=15 mm, 20 mm and 30 mm). The peak augmentation of the distribution of the local non-dimensional temperature occurs in the downwash region near the point of minimum boundary-layer thickness.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2007년도 추계학술대회
• /
• pp.149-154
• /
• 2007

This study examines the effect of acoustic excitation using forced coaxial air on the flame characteristics of turbulent hydrogen nonpremixed flames. A resonance frequency was selected to acoustically excite the coaxial air jet due to its ability to effectively amplify the acoustic amplitude and reduce flame length and NOx emissions. Acoustic excitation causes the flame length to decrease by 15 % and consequently, a 25 % reduction in EINOx is achieved, compared to a flame without acoustic excitation. Moreover, acoustic excitation induces periodical fluctuation of the coaxial air velocity, thus resulting in slight fluctuation of the fuel velocity. From phase-lock PIV and OH PLIF measurement, the local flow properties at the flame surface were investigated under acoustic forcing. During flame-vortex interaction in the near field region, the entrainment velocity and the flame surface area increased locally near the vortex. This increase in flame surface area and entrainment velocity is believed to be a crucial factor in reducing flame length and NOx emission in coaxial jet flames with acoustic excitation. Local flame extinction occurred frequently when subjected to an excessive strain rate, indicating that intense mass transfer of fuel and air occurs radially inward at the flame surface.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제23회 추계학술대회 논문집
• /
• pp.137-140
• /
• 2004

주기적인 와류화염과 열방출 진동의 연관성에 대한 실험적인 연구가 수행되었다. 난류제트화염은 덤프 연소기에서 재순환 되는 뜨거운 생성물에 의해서 안정화되며, 큰 스케일의 주기적 와류가 음파에 의해서 제트화염에 부가되었다. 실제적인 연소기에서의 불안정 현상을 모사하기 위해 가진주파수와 실험변수들을 조절하였다. 본 연구의 목적은 원치 않는 열방출의 진동을 유도시키는 와류-열방출의 연관성을 분석하여, 연소불안정의 능동제어를 위해 사용될 수 있는 알맞은 연료분사 패턴을 조사하는 것이다. 주기적인 패턴을 측정할 수 있는 슐리렌 기법과 CH* chemiluminescence 기법이 사용되었으며, 실험결과는 와류 생성 사이클의 위상에 따라서 서로 비교되었다.

• 한국항공우주학회지
• /
• 제41권1호
• /
• pp.40-47
• /
• 2013

하이브리드 로켓은 고체로켓과 매우 흡사한 내부유동 특성을 가지고 있으므로 와류흘림(vortex shedding)은 하이브리드 로켓에서도 연소안정성에 영향을 미치는 중요한 인자로 판단된다. 본 연구에서는 예연소실에서 와류를 발생시켜 연료 표면와류와의 간섭과 연소특성 변화를 관찰하였다. 기본 형상과 디스크를 장착한 실험 결과, 5개의 주파수 특성이 관찰되었으며 이들은 각각 추진제의 열적지연에 의한 주파수, 디스크, 연료 단면, 후연소실 단면 변화에 의한 와류흘림과 관련된 주파수임을 확인하였다. 특히 디스크 1과 3의 결과를 비교해 보면 디스크 위치에 따라 변화하는 와류흘림이 연소실의 특정 주파수 특성과 상호 간섭하여 공진이 발생하기도 하지만, 또 다른 경우에는 어떠한 간섭도 일어나지 않는 것을 확인하였다. 이러한 선택적 공진현상은 하이브리드 로켓의 비선형 연소안정성 발생을 설명할 수 있는 중요한 메카니즘으로 판단된다.

• 한국지구과학회지
• /
• 제27권1호
• /
• pp.61-72
• /
• 2006

대기-해양의 상호작용과 제주도 후면에서 발생하는 카르만소용돌이행렬의 상관관계를 수치실험을 통하여 분석하였다. 카르만 소용돌이는 한라산의 제한된 높이에서 형성되는 경향을 가지고 있다. 그리고 본 연구에서는 900 hPa고도에서 카르만 소용돌이가 뚜렷이 생성되었다. 카르만소용돌이행렬의 발생초기에는 하나의 소용돌이세포가 나타나고 시간이 경과함에 따라 소용돌이는 이류를 한다. 이때 작은 소용돌이로 분리되는 경향이 있다. 분리된 소용돌이의 강도와 지속시간은 해수면 온도 분포와 밀접한 관계를 가진다. 즉 약한 해수면의 온도경도는 카르만 소용돌이의 지속 시간을 길게 하며, 산 후면의 소용돌이도를 감소시킨다. 강한 해수면 온도경도는 혼합층과 대기하층 수증기량을 증가시키고, 강화된 하층대기 혼합은 산악에 의하여 형성되는 기계적 응력을 감소시키는 경향이 있다.

• 한국가시화정보학회지
• /
• 제17권2호
• /
• pp.39-47
• /
• 2019

Impingement cooling utilizing synthetic jets is emerging as a popular cooling technique because of its high local cooling efficiency. The interaction between the vortex structure of the synthetic jet and the surface is crucial in understanding the mechanism of this technique. In this study, the impinging vortex structure and its advection are investigated by experiments with jet-to-surface spacing $2{\leq}H/D{\leq}7$, and synthetic jet Reynolds number $5120{\leq}Re{\leq}9050$. Using phase-locked particle image velocimetry, ensemble averaged (phase averaged) flow fields are obtained, and vortex identification and quantification techniques are applied. The shape, trajectory, and intensity change of the vortex are assessed. A sharp decline in the vortex intensity and the occurrence of a counter-rotating vortex at the impingement point are observed.

• 한국전산유체공학회지
• /
• 제17권1호
• /
• pp.29-35
• /
• 2012

Fluid-Structure Interaction analysis of a circular cylinder surrounded by incompressible turbulent flow is presented. The fluid flow is modeled by incompressible Navier-Stokes equations in conjunction with large-eddy simulation for turbulent vortical flows. The circular cylinder is modeled as elastic continuum described by elasto-dynamic equation of motion. Finite element method based approach is utilized for unified formulation of fluid-structure interaction analysis. The magnitude and frequency of structural response is analysed in comparison to the driving fluid forces.

• International Journal of Fluid Machinery and Systems
• /
• 제10권2호
• /
• pp.164-175
• /
• 2017

Francis turbines are often operated over a wide load range due to high flexibility in electricity demand and penetration of other renewable energies. This has raised significant concerns about the existing designing criteria. Hydraulic turbines are not designed to withstand large dynamic pressure loadings on the stationary and rotating parts during such conditions. Previous investigations on transient operating conditions of turbine were mainly focused on the pressure fluctuations due to the rotor-stator interaction. This study characterizes the synchronous and asynchronous pressure and velocity fluctuations due to rotor-stator interaction and rotating vortex rope during load variation, i.e. best efficiency point to part load and vice versa. The measurements were performed on the Francis-99 test case. The repeatability of the measurements was estimated by providing similar movement to guide vanes twenty times for both load rejection and load acceptance operations. Synchronized two dimensional particle image velocimetry and pressure measurements were performed to investigate the dominant frequencies of fluctuations, vortex rope formation, and modes (rotating and plunging) of the rotating vortex rope. The time of appearance and disappearance of rotating and plunging modes of vortex rope was investigated simultaneously in the pressure and velocity data. The asynchronous mode was observed to dominate over the synchronous mode in both velocity and pressure measurements.

• International Journal of Aeronautical and Space Sciences
• /
• 제1권1호
• /
• pp.1-12
• /
• 2000

The wake geometries of a two-bladed rotor in axial flights using a time-marching free-wake method without a non-physical model of the far wake are calculated. The computed free-wake geometries of AH-1G model rotor in climb flight are compared with the experimental visualization results. The time-marching free-wake method can predict the behavior of the tip vortex and the wake roil-up phenomena with remarkable agreements. Tip vortices shed from the two-bladed rotor can interact with each other significantly. The interaction consists of a turn of the tip vortex from one blade rolling around the tip vortex from the other. Wake expansion of wake geometries in radial direction after the contraction is a result of adjacent tip vortices begging to pair together and spiral about each other. Detailed numerical results show regular pairing phenomenon in the climb flights, the hover at high angle of attack and slow descent flight too. On the contrary, unstable motions of wake are observed numerically in the hover at low angle of attack and fast descent flight. It is because of the inherent wake instability and blade-vortex-interaction rather then the effect of recirculation due to the experimental equipment.