• Title/Summary/Keyword: Volumetric Rate

검색결과 470건 처리시간 0.035초

모형실험장치를 이용한 불포화토의 강우 침투특성 분석 (Analysis of rainfall infiltration characteristics for unsaturated soils using a column test equipment)

  • 박규보;채병곤;김경수
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회
    • /
    • pp.736-742
    • /
    • 2010
  • This study was conducted to characterize on the relationships of rainfall intensity and infiltration rate of rainfall dependent on unit weight change in the gneissic weathered soil by a column test equipment. In this study, volumetric water content and pore water pressure were measured using TDR sensors and tensiometers at regular time intervals. Rainfall conditions including continuous rainfall and repeated rainfall were selected in order to know the effect of antecedent rainfall. In the condition of rainfall intensity 20mm/h and the unit weights of soil as $1.35g/cm^3$, $1.55g/cm^3$ and $1.61g/cm^3$, average rainfall infiltration rate was $2.814{\times}10^{-3}cm/sec$, $1.969{\times}10^{-3}cm/sec$ and $1.252{\times}10^{-3}cm/sec$ respectively. The higher rainfall intensity and lower unit weight of soil, the faster average infiltration rate. Overflow in the column was happened except rainfall condition of rainfall intensity 20mm and soil unit weight $1.35g/cm^3$. Increasing the soil unit weight, overflowed water was increased and occurrence time was faster.

  • PDF

인벌류트 기어펌프의 기어 편심에 따른 유동특성 (The effect of eccentricity between gear and housing in involute gear pump)

  • 김성훈;손혜민;이재천
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제37권6호
    • /
    • pp.631-637
    • /
    • 2013
  • 기어 끝단과 하우징 사이의 간극이 회전방향으로 편심된 인벌류트펌프에서 체적유량과 유량효율을 검토하였다. 해석은 k-e 모델을 이용하여 FLUENT/R-13을 사용하여 기어의 회전속도, 간극의 거리 및 출구압력이 주어져 있을 경우 난류유동을 해석하였다. 동심축과 편심축의 경우 체적유량을 비롯한 유동특성에 대해 독립변수들의 영향은 지속되었으나 회전방향에 대한 압력 분포는 서로 달라 편심의 경우 상류부에서 대부분의 압력이 상승하고 하류부의 압력은 거의 일정한 특성을 보였으며 편심의 영향이 클수록 이러한 현상은 심하게 나타났다. 편심펌프에서 유동특성은 최소 간극에 의존하며 체적유량 혹은 체적효율은 편심되기 전 동심축보다 크나 최소간극과 같은 크기의 동심펌프보다는 작다. 펌프에서 기어축의 편심에 의한 간극 축소는 펌프성능에 긍정적인 영향을 미칠 수 있다.

소형 송풍기 소음의 음향학적 상사성에 관한 연구 (Acoustical Similarity for Small Cooling Fans Revisited)

  • 김용철;진성훈;이승배
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1995년도 춘계학술대회논문집; 전남대학교, 19 May 1995
    • /
    • pp.196-201
    • /
    • 1995
  • The broadband and discrete sources of sound in small cooling fans of propeller type and centrifugal type were investigated to understand the turbulent vortex structures from many bladed fans using ANSI test plenum for small air-moving devices (AMDs). The noise measurement method uses the plenum as a test apparatus to determine the acoustic source spectral density function at each operating conditions similar to real engineering applications based on acoustic similarity laws. The characteristics of fans including the head rise vs. volumetric flow rate performance were measured using a performance test facility. The sound power spectrum is decomposed into two non-dimensional functions: an acoustic source spectral distribution function F(St,.phi.) and an acoustic system response function G(He,.phi.) where St, He, and .phi. are the Strouhal number, the Helmholtz number, and the volumetric flow rate coefficient, respectively. The autospectra of radiated noise measurements for the fan operating at several volumetric flow rates,.phi., are analyzed using acoustical similarity. The rotating stall in the small propeller fan with a bell-mouth guided is mainly due to a leading edge separation. It creates a blockage in the passage and the reduction in the flow rate. The sound power levels with respect to the rotational speeds were measured to reveal the mechanisms of stall and/or surge for different loading conditions and geometries, for example, fans installed with a impinging plate. Lee and Meecham (1993) studied the effect of the large-scale motions like impinging normally on a flat plate using Large-Eddy Simulation(LES) and Lighthill's analogy.[ASME Winter Annual Meeting 1993, 93-WA/NCA-22]. The dipole and quadrupole sources in the fans tested are shown closely related to the vortex structures involved using cross-correlations of the hot-wire and microphone signals.

  • PDF

Soil-Bentonite 혼합토의 불포화 투수특성 연구 (A Study on Unsaturated Permeable Properties of the Soil-Bentonite Mixtures)

  • 김만일
    • 지질공학
    • /
    • 제15권2호
    • /
    • pp.123-132
    • /
    • 2005
  • 본 연구에서는 폐기물 매립장의 차수층으로 사용되는 벤토나이트 혼합토에 대한 연직침윤시험과 Frequency Domain Reflectometry 측정 장비를 이용한 유전율 측정시험을 수행하였다. 표준사, 화강풍화토, 벤토나이트 재료에 대해 다양한 배합 비율을 적용하여 제작된 벤토나이 트 혼합토의 체적함수비, 간극비, 유전율상수 등의 관계로부터 이들의 불포화 투수 특성을 파악하였다. 연구결과에 따르면 초기 벤토나이트 혼합비는 체적함수비 변화에 영향을 미치며, 체적함수비 변화는 간극비와 밀접한 관계를 가지고 있다. 또한 벤토나이트 혼합토의 체 적 함수비 변화는 유전율 반응으로부터 명확히 측정됨을 파악하였다. 벤토나이트 혼합토의 불포화 투수 특성을 파악하기 위한 본 연구에서 체적함수비와 유전율상수의 관계함수를 추정하였다.

제로터 펌프의 설계 및 배제용적 특성 실험 (Design of a Gerotor Pump and Experimental Investigation of Its Volumetric Displacement Characteristics)

  • 김대명;김성동;구지석;오성진;함영복
    • 대한기계학회논문집A
    • /
    • 제35권11호
    • /
    • pp.1383-1389
    • /
    • 2011
  • 제로터 펌프는 용적식 펌프로서 유압 및 수압장치에 적합하며, 다양한 분야에서 널리 사용되어지고 있다. 이러한 이유로 많은 연구자들에 의해 연구되어지고 있다. 본 연구에서는 선행연구자들에 의해 연구되어진 제로터의 이론적 설계 방법을 토대로 설계식의 타당성을 검증해보고 곡선족의 포락선으로 부터 로터 프로파일을 설계하는 방법을 설명하고 CAD기법을 이용한 계산과 실험을 통하여 설계 프로파일과 배제용적 산출 방법의 타당성을 비교 검증 하였다. 제로터 펌프의 특성실험을 통하여 성능을 확인하고 제로터 펌프의 디자인과 배제용적 산출 방법을 설명하였다.

천연 광물질을 이용한 CO2 석탄 촉매 가스화 반응 특성 연구 (Study on CO2-Coal Gasification Reaction Using Natural Mineral Catalysts)

  • 이루세;손정민
    • 공업화학
    • /
    • 제27권1호
    • /
    • pp.56-61
    • /
    • 2016
  • 본 연구에서는 천연 광물질 촉매를 사용하여 $CO_2$ 석탄가스화의 반응특성을 조사하였다. Meng Tai지역의 갈탄에 4종류의 천연 광물질(Dolomite, Silica sand, Olivine, Kaolin)을 각각 5 wt%로 물리적으로 혼합한 후 Thermogravimetric Analyzer (TGA)를 이용하여 800, 850, $900^{\circ}C$에서 $CO_2$ 가스화 반응을 수행하였다. 실험 결과를 Volumetric Reaction Model (VRM), Shrinking Core Model (SCM), Modified Volumetric Reaction model (MVRM)을 이용하여 분석하였다. MVRM이 가장 적합하였다. 반응 온도가 올라감에 따라 반응속도상수가 커졌다. 천연 광물질 촉매를 사용할 경우가 촉매를 혼합하지 않은 경우에 비해 반응속도상수는 커지고 활성화 에너지 값이 낮아졌다. Silica sand를 혼합한 시료의 활성화 에너지 값은 114.90 kJ/mol로 가장 낮은 활성화 에너지 값을 보였다. Kaolin을 혼합한 시료의 경우 $850^{\circ}C$$900^{\circ}C$에서 각각 가장 높은 반응속도상수를 보여주다가 $800^{\circ}C$에서 낮은 반응속도상수를 나타냈다. 따라서 Kaolin을 혼합한 경우, 반응 온도가 높아질수록 $CO_2$ 가스화에 좋은 효과가 있을 것이다.

비극성용매 내의 벤젠 물질전달특성 (Mass transfer characteristics of benzene in nonpolar solution)

  • 최성우;김혜진;박문기
    • 한국환경과학회지
    • /
    • 제11권6호
    • /
    • pp.605-610
    • /
    • 2002
  • The absorption of benzene in nonpolar solution was studied in a laboratory-scale of bubble column varying of gas flow rates and gas-to-liquid ratios. A bubble column had a 0.8∼l$\times$10$\^$-3/ m$^3$ total volume (height 1500 mm, diameter 50 mm). Solution analysis was performed by GC-FID and GC-MSD. The objectives of this research were to select the best absorption fluid and to evaluate the mass transfer characteristics under specific conditions of each absorption. The results of this research were follow as: First, the heat transfer fluid is more efficient than the other nonpolar solution in removing VOC. Second, The benzene removal efficiency improved according to an increasing rate of gas flow. Also, volumetric mass transfer rate of column can be enhanced by increasing gas flow rate. Finally, the relation of gas flow rates, liquid amount, and volumetric mass transfer coefficient was obtained as follows. K$\_$y/a: 0.5906(V$\_$g//L)$\^$0.7611/ The following correlation of mass transfer coefficient and efficiency was proposed. v= 0.06078 K$\_$y/a$\^$0.2444/.

Comparison of the Nitrification Efficiencies of Three Biofilter Media in a Freshwater System

  • Harwanto, Dicky;Oh, Sung-Yong;Jo, Jae-Yoon
    • Fisheries and Aquatic Sciences
    • /
    • 제14권4호
    • /
    • pp.363-369
    • /
    • 2011
  • Total ammonia nitrogen (TAN) removal efficiencies of a sand filter (SF), polystyrene microbead filter (PF), and Kaldnes bead filter (KF) media were evaluated under ammonia loading rates of 5, 25, and 50 g $m^{-3}day^{-1}$. The volume of each filter media tested was 7 L, and the water flow rate for all filter media was 24 L/min. The specific surface areas of the SF, PF, and KF were 7,836, 3,287, and 500 $m^2/m^3$, respectively. Sand was fluidized and the other two media were trickle filtered. The volumetric TAN removal rate increased with increasing ammonia loading rate for all filter media. Mean volumetric TAN removal rates under the ammonia loading rates of 5, 25, and 50 g $m^{-3}day^{-1}$ in SF (39.3, 168.6, and 322.7 g $m^{-3}day^{-1}$, respectively) were higher than those in PF (35.0, 157.4, and 310.5 g $m^{-3}day^{-1}$, respectively) and KF (32.1, 142.5, and 288.1 g $m^{-3}day^{-1}$, respectively). These results were related to differences in the specific surface areas of the filter media. PF was the most economic media for efficiently removing TAN.

High xylitol production rate of osmophilic yeast Candida tropicalis by long-term cell-recycle fermentation in a submerged membrane bioreactor

  • Kwon, Seun-Gyu;Park, Seung-Won;Oh, Deok-Kun
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2005년도 생물공학의 동향(XVII)
    • /
    • pp.272-276
    • /
    • 2005
  • Candida tropicalis, an osmophilic strain isolated from honeycomb, produced xylitol at a maximal volumetric production rate of 3.5 g $l^{-1}$ $h^{-1}$ from an initial xylose concentration of 200 g $l^{-1}$. Even with a very high xylose concentration, e.g., 350 g $l^{-1}$, this strain produced xylitol at a moderate rate of 2.07 g $l^{-1}$ $h^{-1}$. In a fed-batch fermentation of xylose and glucose, 260 g $l^{-1}$ of xylose was added, and xylitol production was 234 g $l^{-1}$ for 48 h, corresponding to a rate of 4.88 g $l^{-1}$ $h^{-1}$. To increase the xylitol production rate, cells were recycled in a submerged membrane bioreactor with suction pressure and air sparging. In cell-recycle fermentation, the average concentration of xylitol produced per recycle round, total fermentation time, volumetric production rate, and product yield for ten rounds were 180 g $l^{-1}$, 195 h, 8.5 g $l^{-1}$ $h^{-1}$, and 85%, respectively. When cell-recycle fermentation was started with the cell mass contratrated two-fold after batch fermentation and was performed for ten recycle rounds, we achieved a very high production rate of 12 g $l^{-1}$ $h^{-1}$. The production rate and total amount of xylitol produced in cell-recycle fermentation were 3.4 and 11 times higher than in batch fermentation, respectively.

  • PDF

수직적 치조제 증강술후 발생하는 골흡수량에 관한 연구 (THE STUDY ON THE BONE RESORPTION RATE AFTER VERTICAL ALVEOLAR RIDGE AUGMENTATION)

  • 전하룡;김종원;권호범;이동환;홍종락;김창수
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제32권3호
    • /
    • pp.230-234
    • /
    • 2006
  • Purpose: This study presents radiographic and laboratory analysis and comparison of bone resorption rate of grafted endochondral bone and intramembranous bone on the aspect of height and volumetric change. Patients and Methods: 18 partially edentulous patients who needed alveolar ridge augmentation for implant placement during the years 2002 to 2004 were selected for this study. Group A consisted of 5 males & 3 females who were treated with intraoral(intramembranous) bone and Group B consisted of 8 males & 2 females who were treated with iliac(endochondral) bone. Non-standard periapical X-ray was taken at day 1, 2 month, 4 months, 8 months after the surgery. Resorption rate of grafted bone were measured on these X-rays and compared. Also we calculated volume of grafted bone with models which was fabricated at 1.5 months, 6 months. Results: There was bone resorption in both groups. Group B showed more bone resorption than Group A. In Group A, the resorption rate according to the radiographic measurements was 9.81 %, and resorption rate according to volumetric measurement was 16.5 %. In group B, the resorption rate according to the radiographic measurements was 15.9 %, and resorption rate according to volumetric measurement was 30.6 %. Significant difference is on radiographic resorption of post-op 2, 4, 8 months on two groups (P < 0.05). Also significant difference is on volume resorption on two groups (P < 0.05). Conclusion: We found that more bone resorption occurred with iliac(endochondral) bone and when we use intraoral bone, that bone can maintain their vitality for alveolar ridge augmentation.