• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.11
• /
• pp.903-910
• /
• 2014

Electric fans, which consist of axial blades, are operated by the induction motor. In this paper, the objective of this study is the performance improvement of the base model fan using the design optimization. In order to aerodynamic analysis, computational simulations are performed using commercial tool ANSYS-CFX ver. 14.5. And k-${\omega}$ SST turbulence model is used for the CFD analysis. The design variables are set up as sweep and lean angles. Volumetric flow rate and torque of the fan blades are fixed to objective function. The optimized model is shown the increment of the volumetric flow rate and the reduction of the torque compared with the base model. The experimental procedure is followed KS C 9301. CFD results and experimental results are fairly well matched.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.521-528
• /
• 2008

The micro-porous asymmetric PVDF hollow fiber membranes for gas-liquid contactor were prepared by the dry-jet wet phase inversion process and the characteristics of hollow fiber membranes were evaluated by the gas permeation method and scanning electron microscope. The chemical absorbent for removal of $SO_2$ gas was sodium hydroxide at bench scale hollow fiber membrane contactor. The experiments were performed in a counter-current mode of operation with gas in the shell side and liquid in the fiber lumen of the module to examine the effect of various operating variables such as concentration of absorbent, gas flow rate, L/G ratio and concentration of inlet $SO_2$ gas on the $SO_2$ removal efficiency using PVDF hollow fiber membrane contactor. Membrane mass transfer coefficient($k_m$) was calculated by mathematical modeling. The volumetric overall mass transfer coefficient increased with increasing the concentration of absorbent and L/G ratio. The increase of the absorbent concentration and L/G ratio not only provides more sufficient alkalinity but also decreases liquid phase resistance. The volumetric overall mass transfer coefficient increased with increasing gas flow rate due to decreasing the gas phase resistance.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.1
• /
• pp.19-30
• /
• 2017

In this study, the quality characteristics of noodles containing different amounts of germinated black quinoa were investigated. The powder of black quinoa with the highest antioxidative activation was selected; and composite flour was prepared with 0%, 5%, 10%, 15%, and 20% of germinated black quinoa powder to produce the noodles. We evaluated the quality and sensory characteristics of the noodles, including pH, salinity, water absorption rate, volumetric expansion rate, turbidity, chromaticity, extensibility, and texture. With regards to the quality characteristics of noodles with added germinated black quinoa, the pH and salinity decreased with increasing percentage of added germinated black quinoa (p<0.001). Increasing the percentage of added germinated black quinoa resulted in decreased water absorption (p<0.01) and volumetric expansion rates and increased turbidity of the cooked noodles (p<0.001). In terms of the chromaticity, L and b values decreased and a value increased with the increasing percentage of added germinated black quinoa (p<0.001). For the texture, hardness (p<0.001), adhesiveness (p<0.01), springiness (p<0.01), chewiness (p<0.001), gumminess (p<0.001), and cohesiveness (p<0.05) decreased as the percentage of added germinated black quinoa increased; while extensibility (p<0.001) increased. Consumer testing results indicated that the noodles with 15% of added germinated black quinoa showed the best results. Collectively, the evaluation of quality characteristics and consumer acceptability indicated that adding 15% of germinated black quinoa to produce noodles is optimal.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.4
• /
• pp.378-384
• /
• 2009

Objective : In order to establish the role of Gamma Knife radiosurgery (GKS) in large intracranial arteriovenous malformations (AVMs), we analyzed clinical characteristics, radiological features, and radiosurgical outcomes. Methods : Between March 1992 and March 2005, 28 of 33 patients with large AVMs (> $10\;cm^3$ in nidus-volume) who were treated with GKS underwent single session radiosurgery (RS), and the other 5 patients underwent staged volumetric RS. Retrospectively collected data were available in 23 cases. We analyzed treatment outcomes in each subdivided groups and according to the AVM sizes. We compared the estimated volume, defined as primarily estimated nidus volume using MR images, with real target volume after excluding draining veins and feeding arteries embedded into the nidus. Results : Regarding those patients who underwent single session RS, 44.4% (8/18) had complete obliteration; regarding staged volumetric RS, the obliteration rate was 40% (2/5). The complete obliteration rate was 60% (6/10) in the smaller nidus group ($10-15\;cm^3$ size), and 25% (2/8) in the larger nidus group (over $15\;cm^3$ size). One case of cerebral edema and two cases (8.7%) of hemorrhage were seen during the latent period. The mean real target volume for 18 single sessions of RS was $17.1\;cm^3$ ($10.1-38.4\;cm^3$), in contrast with the mean estimated volume of $20.9\;cm^3$ ($12.0-45.0\;cm^3$). Conclusion : The radiosurgical treatment outcomes of large AVMs are generally poor. However, we presume that the recent development in planning software and imaging devices aid more accurate measurement of the nidus volume, therefore improving the treatment outcome.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.76-82
• /
• 2012

Biomass and coal are great potential energy sources for gasification process. These solids can be gasified to produce syngas and bio-oil which can be upgraded further to transportation fuel. Two biomass and three coals have been gasified with steam in a thermobalance reactor under atmospheric pressure in order to evaluate their kinetic rate information The effects of gasification temperature ($600{\sim}850^{\circ}C$) and partial pressure of steam (30~90 kPa) on the gasification rate have been investigated. The three different types of gas-solids reaction models have been applied to the experimental data to compare their predictions of reaction behavior. The modified volumetric reaction model predicts the conversion data well, thus that model was used to evaluate kinetic parameters in this study. The gasification reactivity of five solids has been compared. The obtained activation energy of coal and biomass gasification were well in the reasonable range. The expression of apparent reaction rates for steam gasification of five solids have been proposed as basic information for the design of coal gasification processes.

• Clean Technology
• /
• v.20 no.1
• /
• pp.72-79
• /
• 2014

In this study, we investigated reaction rate constant and activation energy of $CO_2$ lignite gasification by using waste catalysts (I, II, III) and $K_2CO_3$. The gasification experiments were conducted with the lignite which was mixed physically with the catalysts of 1 wt%, 5 wt%, 10 wt% by thermogravimetry with TGA at $800^{\circ}C$, $850^{\circ}C$ and $900^{\circ}C$. The experimental data was analyzed with kinetic models (VRM, SCM and MVRM). MVRM was the most suitable among the three models. It was confirmed that gasification rate increased with increasing temperature and the activation energies of $CO_2$ gasification of lignite with mixed waste catalysts were lower than that of lignite alone at all temperatures. Especially, 10 wt% of waste catalyst III showed the lowest activation energy, 92.37 kJ/mol, among all lignite-char with catalysts.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.7
• /
• pp.1005-1014
• /
• 2012

The understanding of the relationship between ammonia-oxidizing bacteria (AOB) communities in activated sludge and the operational treatment parameters supports the control of the treatment of ammonia-rich wastewater. The modifications of treatment parameters by alteration of the number and length of aerobic and anaerobic stages in the sequencing batch reactor (SBR) working cycle may influence the efficiency of ammonium oxidation and induce changes in the AOB community. Therefore, in the research, the impact of an SBR cycle mode with alternating aeration/mixing conditions (7 h/1 h vs. 4 h/5.5 h) and volumetric exchange rate (n) on AOB abundance and diversity in activated sludge during the treatment of anaerobic sludge digester supernatant at limited oxygen concentration in the aeration stage (0.7 mg $O_2/l$) was assessed. AOB diversity expressed by the Shannon-Wiener index (H') was determined by the cycle mode. At aeration/mixing stage lengths of 7 h/1 h, H' averaged $2.48{\pm}0.17$, while at 4 h/5.5 h it was $2.35{\pm}0.16$. At the given mode, AOB diversity decreased with increasing n. The cycle mode did not affect AOB abundance; however, a higher AOB abundance in activated sludge was promoted by decreasing the volumetric exchange rate. The sequences clustering with Nitrosospira sp. NpAV revealed the uniqueness of the AOB community and the simultaneously lower ability of adaptation of Nitrosospira sp. to the operational parameters applied in comparison with Nitrosomonas sp.

• Journal of radiological science and technology
• /
• v.41 no.1
• /
• pp.39-45
• /
• 2018

The purpose of this study is to evaluate the usefulness of a software-based quality assurance system based on Volumetric Modulated Arc Therapy treatment plan. Evaluate treatment plan through the D VH analysis, PTV mean dose ($D_{mean}$) and PTV 95% dose($D_{95}$) compare the MFX based on original treatment plan, Average error rate was $0.9{\pm}0.6%$, $1.0{\pm}0.8%$, respectively. Measuring point dose using phantom and ion chamber, the average error rate between the ionization chamber and MFX was $0.9{\pm}0.7%$, $1.1{\pm}0.7%$ (high dose region), $1.1{\pm}0.9%$, $1.2{\pm}0.7%$ (low dose region). The average gamma though of MFX and $Delta^{4PT}$ is $98.7{\pm}1.2%$, $98.4{\pm}.3%$, respectively. Through this study, A software based QA system that simplifies hardware based QA procedures that involve a lot of time and effort. It can be used as a simple and useful tool in clinical practice.

• Journal of Cerebrovascular and Endovascular Neurosurgery
• /
• v.25 no.1
• /
• pp.28-35
• /
• 2023

Objective: The purpose of this study was to evaluate the effectiveness of middle meningeal artery embolization (MMAE) in elderly high-risk patients with symptomatic chronic subdural hematoma (CSDH) in terms of reduction in hematoma volume and recurrence rate. Methods: We retrospectively reviewed data prospectively collected from nine patients who underwent 13 MMAE for CSDH between June 2017 and May 2022. The volume of the subdural hematoma was measured using a computer-aided volumetric analysis program. Hematoma volume changes during the follow-up period were analyzed and clinical outcomes were evaluated. Results: The mean follow-up period was 160 days (range, 46-311 days). All procedures were technically successful and there were no procedure-related complications. Of the 13 MMAE, 84% (11 out of 13 hemispheres) showed mean 88% of reduction on follow-up volumetric study with eight cases of complete resolution. There was one refractory case with MMAE which had been performed multiple burr-hole trephinations, for which treatment was completed by craniotomy and meticulous resection of multiple pseudomembranes. There was no recurrent case during the follow-up period, except for refractory case. Conclusions: MMAE for CSDH in selected high-risk elderly patients and relapsed patients might be effective. Despite the small cohort, our findings showed a high rate of complete resolution with no complications. Further prospective randomized trials are warranted to evaluate its usefulness as a primary treatment option for CSDH.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.727-733
• /
• 2009

Effects of $Ca(OH)_2$ concentration(0.16~0.64 wt%), total volumetric flow rate(3~6 L/min) and $CO_2$ volume fraction(0.3~0.6) on morphology of the precipitated $CaCO_3$ and the mean particle size of the precipitated $CaCO_3$ were investigated in the slurry bubble column reactor. Experiments were carried out in acrylic reactor($0.11m-ID{\times}1.0m-high$) with a internal tube($0.04m-ID{\times}1.0m-high$). The calibration curve on the mass ratio of $CaCO_3$ to $Ca(OH)_2$ was obtained by FT-IR for the conversion of $Ca(OH)_2$ with the reaction time. The reaction rate of $Ca(OH)_2$ increased with increasing the volumetric flow rate of $CO_2$. From SEM images, the crystal size of $CaCO_3$ increased with increasing the reaction rate in the saturated concentration of $Ca(OH)_2$ (0.16 wt%). In addition, the crystal size of precipitated $CaCO_3$ decreased with increasing the concentration of $Ca(OH)_2$, but the mean particle size of precipitated $CaCO_3$ increased with increasing the concentration of $Ca(OH)_2$.