• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 추계학술발표대회 개요집
• /
• pp.36-38
• /
• 2003

In order to understand the basic knowledge on the model of heat source in hybrid welding, authors have conducted finite element analysis to calculate heat distribution using three heat source models of non-split type and split type(Volume, Volume-Volume, Volume-Surface). From the research result, we can confirm that Volume-Volume heat source of split type is suitable for the analysis of heat distribution.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권2호
• /
• pp.36-40
• /
• 2015

Electron cyclotron resonance (ECR) ion source is an essential component of heavy-ion accelerator. For a given design, the intensities of the highly charged ion beams extracted from the source can be increased by enlarging the physical volume of ECR zone [1]. Several models for ECR ion source were and will be constructed depending on their operating conditions [2-4]. In this paper three simulation models with 3, 4 and 6 solenoid system were built, but it's not considered anything else except the number of coils. Two groups of optimization analysis are presented, and the evolution strategy (ES) is adopted as an optimization tool which is a technique based on the ideas of mutation, adaptation and annealing [5]. In this research, the volume of ECR zone was calculated approximately, and optimized designs for ECR solenoid magnet system were presented. Firstly it is better to make the volume of ECR zone large to increase the intensity of ion beam under the specific confinement field conditions. At the same time the total volume of superconducting solenoids must be decreased to save material. By considering the volume of ECR zone and the total length of solenoids in each model with different number of coils, the 6 solenoid system represented the highest coil performance. By the way, a certain case, ECR zone volume itself can be essential than the cost. So the maximum ECR zone volume for each solenoid magnet system was calculated respectively with the same size of the plasma chamber and the total magnet space. By comparing the volume of ECR zone, the 6 solenoid system can be also made with the maximum ECR zone volume.

• 한국전산유체공학회지
• /
• 제19권1호
• /
• pp.15-20
• /
• 2014

Accurate simulation of free-surface wave flows around a ship is very important for better hull-form design. In this paper, a computational fluid dynamics (CFD) code, termed SNUFOAM, which is based on the open source libraries, OpenFOAM, was developed to predict the wave patterns around a ship. Additional anti-diffusion source term for minimizing a numerical diffusion, which was caused by convection differencing scheme, was considered in the volume-fraction transport equation. The influence of the anti-diffusion source term was tested by applying it to free-surface wave flow around the Wigley model ship. In results, the band width of the volume fraction contours between 0.1 to 0.9 at the hull surface was narrowed by considering the anti-diffusion term.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1669-1680
• /
• 1998

A method is developed to include the effect of volume expansion in the description of the flame dynamics using G-equation. Line volume-source is used to represent the effect of the exothermic process of combustion with source strength assigned by the density difference between the burned and the unburned region. The present model provides good agreement with the experimental results. Including volume expansion, the flow field is adjusted to accommodate the increased volume flow rate which crossing the flame front and the result predicts the same behavior of measured velocity field qualitatively. The effect of increasing volume expansion does not change the initial growth rate of flame area but increase the residence time. Consequently this effect increases the maximum area of flame front. The flame propagation in varying flow field due to volume expansion provides a promising way to represent the wrinkled turbulent premixed flames in a numerically efficient manner.

• 한국음향학회지
• /
• 제18권7호
• /
• pp.75-79
• /
• 1999

다중채널 탄성파 음원배열에서 불발 음원에 따라 탐사 성능에 미치는 영향을 확인하기 위하여 음원배열의 빔 패턴과 원거리장 파형 변화를 비교 분석하였다. 원거리장 파형의 주신호 진폭은 전체 건 부피의 약 40%에 해당하는 음원들이 불발을 일으킬 경우, 탐사성능이 66% 정도 유지되는 것으로 확인되었다. 154㎐에서 같은 간격의 음원들이 불발 시에는 배열 형태와 관계없이 길이 및 폭 배열의 빔 폭이 동일하게 나타난다. 길이 배열의 빔 패턴에서는 불발된 음원의 부피가 증가됨에 따라 빔 폭이 41°에서 34°로 좁아지는 경향을 나타낸다. 따라서 부피가 작은 음원 배열일수록 빔폭이 좁고 양호한 파형이 생성되므로 작은 에너지가 요구되는 천부 지층탐사에 적합한 것으로 확인되었다.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.158-164
• /
• 1999

In this paper a simple measurement technique for mechanical-acoustic transfer functions is proposed . The mechanical-acoustic transfer functions, generally , are measured through mechanical excitations ; impact hammers or shakers. Recently , by virtue of vibro-acoustical reciprocity principle, they are measured through acoustic excitations : loudspeakers. This kind of test needs to measure the volume velocity , the radiation characteristics of a sound source. Because the volume velocity of the sound source is changed by driving signal , it is difficult to measure it. However , the new method in this paper needs not to measure the volume velocity of a sound source by combination of mechanical and acoustic excitations. Moreover, this method has the methodological advantages, such as usage of a general loudspeaker for the reciprocal excitation, no sptatial limitations for measurements of mechanical-acoustic transfer functions.

• 소음진동
• /
• 제9권5호
• /
• pp.943-948
• /
• 1999

This paper proposes a feasible and effective method for measuring the mechanical-acoustic transfer function by the application of equivalent area and velocity transfer function, a manifestation of the vibro-acoustical reciprocity principle. On the contrary to the volume velocity used in traditional method, the equivalent area is a peculiar raidation characteristics of sound sources and not influenced by any input signal for driving sound source. This invariant property of equivalent area can get rid of boresome works to measure the volume velocity of a sound source every time the driving signal is changed. Moreover, this method has a remarkable advantage to use a general loudspeaker as an accoustic exciter without the assumption of point source and can be applied to all kinds of sound sources even if they are not omni-directional sources.

• 방송공학회논문지
• /
• 제27권1호
• /
• pp.91-103
• /
• 2022

음원의 음량, 방향 및 음원까지의 거리와 같은 음원의 특성을 인식하는 것은 자율주행차, 로봇 시스템, AI 스피커 등 무인 시스템에서 중요한 기술 중의 하나이다. 음원의 방향이나 거리를 인식하는 방법은 레이다, 라이더, 초음파 및 고주파와 소리를 이용하는 방법이 있다. 그러나 이러한 방법은 신호를 발신하여야 하며, 장애물에 의한 비가시 영역에서 발생하는 음원은 정확하게 인식할 수 없다. 본 논문에서는 비가시 영역을 포함한 주변에서 발생하는 음원의 음량, 방향 및 음원까지의 거리를 인식하는 방법으로 가청 주파수 대역의 소리를 검출하여 인식하는 방법을 구현하고 평가하였다. 음원을 인식하기 위하여 주로 사용하는 교차형 기반의 음원인식 알고리즘은 음원의 음량과 방향을 인식할 수 있으나 사각영역이 발생하는 문제가 있다. 뿐만아니라 이 알고리즘은 음원까지의 거리를 인식할 수 없다는 제약이 있다. 이러한 기존 방법의 한계를 탈피하기 위하여, 본 논문에서는 교차형 기반의 알고리즘보다 더 발전된 직사각형 기법을 사용한 QRAS 기반의 알고리즘으로 음원의 음량, 방향 및 음원까지의 거리를 인식하여 음원의 특성을 파악할 수 있는 음원인식 알고리즘을 제안한다. 전방향 음원인식을 위한 QRAS 기반의 알고리즘은 직사각형으로 배치된 4개의 음향센서에 의하여 도출되는 6쌍의 음향 도착 시간차를 사용한다. QRAS 기반의 알고리즘은 기존 교차형 기반의 알고리즘으로 음원을 인식할 때 발생하는 사각영역과 같은 문제점을 해결할 수 있으며, 음원까지의 거리도 인식할 수 있다. 실험을 통하여 제안된 전방향 음원 인식을 위한 QRAS 기반의 알고리즘은 사각영역없이 음원의 음량, 방향 및 음원까지의 거리를 인식할 수 있음을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.908-914
• /
• 2019

Fusion power shutdown system (FPSS) is a safety system to stop plasma in case of accidents or incidents. The gas injection system for the FPSS presented in this work is designed to research the flow development in a closed system. As the efficiency of the system is a crucial property, plenty of experiments are executed to get optimum parameters. In this system, the flow is driven by the pressure difference between a gas storage tank and a vacuum vessel with a source pressure. The idea is based on a constant volume system without extra source gases to guarantee rapid response and high throughput. Among them, valves and gas species are studied because their properties could influence the velocity of the fluid field. Then source pressures and volumes are emphasized to investigate the volume flow rate of the injection. The source pressure has a considerable effect on the injected volume. From the data, proper parameters are extracted to achieve the best performance of the FPSS. Finally, experimental results are used as a quantitative benchmark for simulations which can add our understanding of the inner gas flow in the pipeline. In generally, there is a good consistency and the obtained correlations will be applied in further study and design for the FPSS.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.47-54
• /
• 1999

A method is developed to include the effect of volume expansion in the description of the flame dynamics using G-equation. Line volume-source is used to represent the effect of the exothermic process of combustion with source strength assigned by the density difference between the burned and the unburned region. The present model provides good agreement with the experimental results by using realistic volume expansion ratio which was not reached in the previous researches. Including volume expansion, the flow predicts the same behavior of measured velocity field qualitatively. The flame propagation in varying flow field due to volume expansion provides a promising way to represent the wrinkled turbulent premixed flames in a numerically efficient manner.