• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2425-2433
• /
• 2018

This study investigates a new organic based material and its dielectric and mechanical properties. It is a comprehensive nanocomposite comprising a combination of various types of nanofillers with hydrophobic silica nanoparticles (AEROSIL R 974) as a matrix modifier and a polyamide nano nonwoven textile, Ultramid-Polyamide 6, pulped in the electrostatic field as a dielectric barrier. The polymer matrix is an epoxy network based on diglycidyl ether of bisphenol A (DGEBA) and cycloaliphatic diamine (Laromine C260). The designed nanocomposite material is an alternative to the conventional three-component composites containing fiberglass and mica with properties that exceed current electroinsulating systems (volume resistivity on the order of $10^{16}{\Omega}{\cdot}m$, dissipation factor tan ${\delta}=4.7{\cdot}10^{-3}$, dielectric strength 39 kV/mm).

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.362-372
• /
• 2010

This paper surveys the physical properties of the multiwall carbon nanotube (MWNT) and polyurethane composite film for improvement of mechanical properties and electrical characteristics. The modification of MWNT was carried out by acid treatment with nitric and sulphuric acid mixed solution, and then followed by thermal treatment for enhancing MWNT dispersion with polyurethane. This modified MWNT was mixed with polyurethane by changing the loading content of MWNT and dispersion time under the dimethylformamide solution in the ultrasonic wave apparatus. Various physical characteristics of the modified PU/MWNT films were measured and analyzed in terms of the loading content and dispersion time. The maximum absorbance of the PU/MWNT films were observed with the 2wt% loading at dispersion times of 2 and 24 hour, respectively. The minimum electrical volume resistivity of PU/MWNT film was shown at the loading content of 0.5wt% or more irrespective of dispersion treating time. However the optimum condition was assumed to 2wt% loading at dispersion time of 2 hours by assessing the surface profile of the film using video microscope. The breaking stress and strain of the PU/MWNT film decreased with increasing loading content, but no change of physical properties was shown with increasing in dispersion time.

• 한국컴퓨터산업학회논문지
• /
• 제3권12호
• /
• pp.1747-1758
• /
• 2002

실리콘 젤의 경화조건에 따른 전기적 특성을 조사하기 위하여 절연파괴특성에 대한 실험을 실시하였다. 실험을 위해 온도 100[$^{\circ}C$], 125[$^{\circ}C$], 150[$^{\circ}C$], 160[$^{\circ}C$], 170[$^{\circ}C$], 180[$^{\circ}C$]에서 각각 30[Min], 1[H], 2[H]동안 경화된 여러 시료를 제작하였다. 절연파괴실험에서 사용된 전극의 재료는 순도 99.9[%]의 구리이며, 전극간 간격은 1~3[mm]로 하였고, 전극의 두께는 0.2[mm]이다. 실험결과 온도 170[$^{\circ}C$]에서 2[H] 경화된 시료의 전기적 특성이 가장 우수하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1992-1994
• /
• 1999

Dicumyl peroxide (DCP) is used for crosslinking agent in general. And the correlation between polyethylene and DCP is significant in particular radiation environment. On this paper, The effects on $Co^{60}{\gamma}$-ray irradiation of polyethylene doped dicumyl peroxide(DCP) were investigated. We experimented on electrical properties as following; electrical tree inception and growing type for applying AC step voltage, AC breakdown strength, volume resistivity, capacitance and dissipation factor at high frequency as increasing dosage. Also, chemical analysis was performed TGA, gel content.

• Macromolecular Research
• /
• 제17권10호
• /
• pp.746-749
• /
• 2009

Poly(ethylene terephthalate) (PET) fabric/poly(3,4-ethylenedioxythiophene) (PEDOT) composite with stable and high electrochemical activity was fabricated by chemical and electrochemical polymerization of 3,4-ethylenedioxythiophene (EDOT) on a PET fabric in sequence. Effects of polymerization conditions on the following characteristics of the composite were studied: electrical conductivity and surface morphology. The electrochemical properties were also investigated by cyclic voltammetry and cyclic charge/discharge experiments. The specific volume resistivity, electrical conductivity and specific discharge capacitance of the composite were 0.034 $\Omega-cm$ and 25 S/cm, and 54.5 F/g, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.198-200
• /
• 2003

In this paper, electrical characteristics of EP(engineering plastic) studies for the purpose of electrical insulation materials. A base resin of the EP are Polyamide and Polyphthalamide. And filler is Glass Fibre. Electrical characteristics of EP represents volume resistivity, arc resistance and breakdown voltage according to glass fiber contents. We compare before water immersion and after water immersion. As the results of experiments, Polyphthalamide has good characteristics of insulation material rather than Polyamide as an insulator for electrical power system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.926-928
• /
• 1999

Treeing inhibitors of barbituric acid derivatives effects on the electrical properties of crosslinked low density polyethylene under radiation environments were investigated. The electrical parameters for tree inception voltage, AC breakdown strength, volume resistivity, capacitance and dissipation factor at 1MHz and thermoluminescence, gel content measurements were discussed as a function of irradiated dosages. From the results, barbituric acid among the treeing inhibitors was shown the best treeing and radiation resistance.

• 대한전기학회논문지
• /
• 제33권3호
• /
• pp.112-117
• /
• 1984

The dielectric propertries of polymers are very important to investigate the molecular structure of polymer. The characteristrics of the dielectric absorption in vulcanized natural rubber were studied in the range of frequency from 10[KHz] to 32[MHz] at the temperature of 25[$^{\circ}C$]. As the results. it has been confirmed that in the case of natural ruber vulcanized between 2 and 4phr the specimens exhibit two kind of dielectric losses due to the dipole polarization by impurites and sulfure, and of above 7phr was only a loss due to the dipole polarization by sulfure and of natural rubber exhibit two kind of losses due to the interfacial and the dipole polarization. Furthermore, dielectric loss maximun tan spectrum, which removed to the low frequency according to increasing sulfure, depends greatly on sulfure. The volume resistivity of $10^{7}$~$10^{11}$[$\Omega\cdot$cm], regardness whether the crosslinking of rubber are tired by sulfure or, was observed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.491-493
• /
• 2000

The performance of insulate materials gets worse with stress time in power system and because this causes lowering of function and accidents in equipment, development and performance improvement of excellent insulate materials are needed to make stable system. In this paper, to study the influence of degradation in XLPE, inner semiconducting layer and outer semiconducting layer, we studied dielectric characteristics at temperature $25{\sim}100[^{\circ}C]$ and frequency $20{\sim}1[MHz]$ and volume resistivity at temperature $25{\sim}100^{\circ}C$, voltage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.483-486
• /
• 1999

The treeing inhibitors of barbituric acid derivatives and azocompounds effects on the electrical properties of crosslinked low density polyethylene were investigated. The electrical treeing parameters for tree inception voltage, AC breakdown strength. volume resistivity, capacitance and dissipation factor at 1Mz and thermoluminescence measurements were discussed. From the results, 4- (4-nitrophenylazo) resorcinol among the treeing inhibitors was shown good insulation characteristics.