기존 해수취수시스템의 경우 해수오염, 부유물질, 취수의 불안정 및 유지관리의 어려움 등으로 인해 해수취수의 어려움이 발생하곤 하였다. 이와 같은 단점을 극복하고자 매설식 해수취수시스템을 개발하여 격포항에 설치하였다. 본 연구에서는 새로운 시스템의 거동을 검토하고자, 수질관측 및 3차원 수치모의 실험을 수행하였다. 이 취수시스템에 대하여 총 5회에 걸쳐 COD, 총질소, 총인, PH 그리고 부유물질에 대하여 수질분석을 수행한 결과, COD, 총질소, 총인, PH의 경우 취수 전 후 저감 효과는 미미하였다. 그러나 부유물질의 경우 수산용수 1급 5 mg/L 이하로 정화되는 효과가 나타났다. 수치모형은 유한체적법 기반의 CFX 모형과 RNG $k-{\epsilon}$ 알고리즘을 선정하였으며, 여과사, 외부관 지름 및 두께를 재현하기 위해서 다공성 알고리즘을 적용하였다. 수치모의 실험을 수행한 결과, 2중관 구조가 내외부관 사이의 공간에 의해 압력의 분포를 균등하게 하여, 흐름 상태나 안정적인 취수측면에서 유리한 것으로 분석되었으며, 취수관을 다열 배치하였을 때 중앙 취수관과 비교하여 양쪽 취수관에서 유량이 0.98배로 감소하였지만 유동의 간섭현상은 발생하지 않았다.
NF와 RO를 이용한 용존성 물질의 제거특성을 관찰하기 위해 UF로 전처리된 지하수가 파일럿플랜트에 6개월 동안 연속 공급되었다. 그리고 NF와 RO에서 발생한 막 오염의 특성을 파악하고 막 오염물질을 규명하기 위해서 파일럿플랜트에서 NF와 RO를 분리하여 autopsy test를 실시하였다. Autopsy test에서는 파일럿플랜트에서 사용된 막의 투과플럭스와 화학세정에 따른 플럭스의 회복율을 측정하였다. 아울러 여기서 발생한 폐세정액의 수질을 분석하여 막 오염물질의 구성성분을 알아보고자 하였다. NF와 RO1의 비플럭스는 운전시간 100일 이후에 급격히 감소하기 시작하였고 RO1에서의 감소율이 NF에서보다 컸다. 회수율이 낮온 RO2의 비플럭스는 점진적으로 감소하였다. 파일럿플랜트에서 용존성 무기물질의 제거율은 전기전도도로 NF, RO1, RO2 막에서 각각 76.3%, 88.2%, 95.3%로 RO2에서 가장 높았다. 용존성 유기물질의 제거율은 TOC로 80%정도였다. 와권형 NF와 RO의 막 오염은 원수 유입부보다는 농축수 유출부에서 많이 발생하였다. 이것은 유출부로 갈수록 막면선속도가 낮아지고 원수 중 오염물질의 농도가 높아졌기 때문이다. 막 오염물질의 주성분은 무기성 Ca염과 유기성 Si염인 것으로 생각되며 비가역적 막 오염에 기여도가 가장 큰 물질은 Fe인 것으로 생각된다. 막 오염물질의 형상을 SEM으로 관찰한 결과 최근접 표면에 유기물질이 부착되어 있고 그 위에 판상모양의 무기성분이 쌓여 있는 형태가 관찰되었다. 미생물 막 오염은 거의 관찰되지 않았는데 이것은 UF에서 1차로 대부분의 미생물이 제거되었기 때문이다.
음식물쓰레기와 종이류로 구성된 유기성고형폐기물(고형물 함량 30% TS)을 대상으로 중온 건식혐기성소화를 시도하였고, 연속 운전 중 수리학적 체류 시간(HRT)을 150일, 100일, 60일, 40일로 감소시켰다. 기질의 고형물 농도를 30% TS (Total Solids)로 고정하였기 때문에 각각의 HRT에 해당하는 고형물 부하는 2.0, 3.0, 5.0, 7.5 kg TS/$m^3$/d였다. HRT를 줄임에 따라 단위용적 당 바이오가스 생산 속도는 증가하였고, HRT 40일에서 3.49${\pm}$0.31 $m^3/m^3/d$로 가장 높은 성능을 보였다. 이 때, 76%의 휘발성 고형물(VS) 분해율이 유지되었고, 0.25 $m^3$/kg $TS_{added}$의 메탄 생산 전환율을 보였으며, 이는 기질의 67.4%에 해당하는 에너지가 메탄 가스로 전환된 것을 의미한다. HRT 100일에서 0.52 $m^3$/kg $TS_{added}$로 가장 높은 바이오가스 전환율을 보였지만, 모든 HRT에서 0.45${\sim}$0.52 $m^3$/kg $TS_{added}$로 큰 차이가 나지 않았다. 고형물 함량이 높은 기질의 원활한 주입을 위해 소화조 발효액의 일부를 기질 투입구로 반송하여 기질과 혼합 후 주입하였다. 주입하고자 하는 기질의 5배에 해당하는 양의 소화조 발효액을 반송하여 혼합하였을 때, 가장 효과적인 기질 주입이 이루어졌다. 중온 건식 조건에서 서식하는 메탄 소화균의 활성도를 측정한 결과, 아세트산, 뷰틸산, 프로피온산을 이용할 경우 각각 2.66, 1.94, 1.20 mL $CH_4/g$ VS/d였다.
대나무를 원료로 탄화 및 활성화 온도 $900^{\circ}C$에서 대나무 활성탄을 만들고, 이 대나무 활성탄에 금속 구리와 금속 은을 담지시켜 금속 담지 대나무 활성탄을 제조하였다. 제조된 금속 담지 활성탄의 비표면적 및 세공분포 등의 물리적 특성을 분석하였다. 또한 폐 대나무 활성탄의 재활용을 위하여 대나무활성탄과 NO 기체의 반응 특성 실험을 열중량분석기를 사용하여 반응 온도 $20{\sim}850^{\circ}C$, NO 농도 0.1~1.8 kPa 변화 조건에서 하였다. 실험 결과, 대나무 활성탄 특성 분석에서 구리 담지 대나무 활성탄에서는 구리 담지량이 증가할수록 세공 부피와 표면적이 감소하였다. 비등온과 등온 NO 반응에서는 전체적으로 구리 담지 대나무 활성탄[BA(Cu)]이 대나무 활성탄[BA]에 비하여 반응속도가 향상되는 것을 볼 수 있었다. 그러나 은 담지 대나무 활성탄[BA(Ag)]은 반응이 억제되는 것을 볼 수 있었다. NO 반응에서의 활성화에너지는 80.5 kJ/mol[BA], 48.5 kJ/mol[BA(Cu)], 66.4 kJ/mol[BA(Ag)]로 나타났고, NO 분압에 대한 반응차수는 0.63[BA], 0.92[BA(Cu)]이었다.
본 연구에서는 부피는 기존 1단 감속기와 동일한 수준을 유지하면서 2단의 감속비를 갖는 소형감속기에 대한 개발을 위하여 새로운 형태의 편심캠을 이용한 감속기의 연구를 진행하였다. 따라서 자동차에 적용되는 무단변속기의 개념을 이용하여 2단 감속기를 설계하였다. 캠은 감속풀리와 가속풀리에 각각 연결되어있는 V-벨트를 압착하여 미끄러짐을 최소화하기 위하여 텐셔너 역할을 할 수 있도록 $180^{\circ}$의 위상차를 두고 편심형태를 가지는 구조로 설계하였다. 또한 캠의 직경을 35mm로 하고, 외경의 폭을 18mm로 하여 v-벨트의 외측부분과 캠이 완벽하게 접촉할 수 있는 구조로 설계하였다. 감속을 위한 저속 풀리는 입력축에 지름 50.8mm의 풀리를 설치하고, 출력축에 지름76.2mm의 풀리를 설치하였다. 가속을 위한 고속 풀리에는 입력축에 지름 76.2mm의 풀리를 설치하고, 출력축에 지름 50.8mm의 풀리를 설치하였다. 설계된 내용을 토대로 변속기의 동력전달효율실험과 발열특성에 대한 실험을 진행하여 타당성을 검증하였다. 또한 타당성 검증을 통하여 감속기의 적합성을 증명하였다.
Liu, Liufa;Tanaka, Katsumi;Hirose, Akio;Kobayashi, Kojiro F.
대한용접접합학회:학술대회논문집
/
대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
/
pp.570-576
/
2002
Application of the aged Inconel 718 in hydrogen environment is seriously restraint by its high hydrogen embrittlement (HE) sensitivity. m previous researches, we have suggested the possibility and applicability of the laser surface annealing (LSA) process in improving the HE resistance of this alloy. Sequentially, a study on the effects of the precipitates in the Inconel 718 on its HE sensitivity was conducted in this research. Firstly, flat bar specimens were heat-treated to obtain various kinds of precipitation microstructures concerning the ${\gamma}$" phase and the 6 phase. Hydrogen was charged into the specimen by a cathodic charging process. The loss in reduction of area (RA) caused by hydrogen charging was used to assess the HE sensitivity. The HE sensitivity of the alloy was lowered with decreasing the volume fraction of ${\gamma}$". Moreover, it was possible to increase the HE resistance of the aged alloy by dissolving the $\delta$ phase, keeping the strength at the same level as that of the common aged alloy. Thus, we concluded that both the $\delta$ phase and the ${\gamma}$" phase affected the HE sensitivity of Inconel 718. Next, two kinds of notch tensile specimens were fabricated, one kind having $\delta$ phase and the other having no $\delta$ phase. All these specimens were aged via the same aging heat treatment process. The LSA process annealed a thin layer of the notch bottom of each specimen. One specimen of each kind was charged with hydrogen by the cathodic hydrogen charging process. Loss in the notch tensile strength (NTS) caused by hydrogen was used to evaluate the HE sensitivity. It was found that while the HE sensitivity of conventionally aged Inconel 718 was decreased by the LSA process, the HE sensitivity of the $\delta$-free aged Inconel 718 could further be decreased. Therefore, for applications in hydrogen environments, it is possible to fabricate alloys with both good HE resistance and high strength by controlling the precipitation conditions, and to improve HE resistance further via applying the LSA process.
The present study investigated the effects of aging on Leydig cells of Sprague Dawley rats. Rats of 3, 6, 12 and 18 months of age were used. Testes of rat were fixed by whole body perfusion using a fixative containing 2.5% glutaraldehyde in cacodylate buffer, processed and embedded in epon-araldite. Using $1{\mu}m$ sections stained with methylene blue, qualitative and quantitative morphological studies were performed. Testis incubations were used to determine luteinizing hormone (LH; 100 ng/ml) stimulated testosterone secretory capacity per testis in vitro. Testosterone levels in the incubation medium, and testosterone and luteinizing hormone levels in serum of these four groups of rats were determined by radioimmunoassay. Morphological studies revealed that Leydig cells were more abundant in the testis interstitium at 6, 12 and 18 months when compared with 3 months. The volumes of Leydig cells per testis was significantly higher, at 6, 12 and 18 months of age than those at 3 months. The number of Leydig cells per testis was doubled at 6, 12 and 18 months of age compared with 3 months. The average volume of a Leydig cell was not significantly different between 3 and 6 months of age, however, at 12 and 18 months a significantly lower value was observed. LH-stimulated testosterone production per testis in vitro was reduced by 45% at 6 months of age compared with 3 months; a further significant reduction was observed at 12 and 18 months. Serum testosterone and LH levels were not significantly different between 3 and 6 months of age but at 12 and 18 months a significantly lower value was observed in both groups for these hormones. These results showed that signs of aging are apparent in Leydig cells of Sprague Dawley rats at 12 months of age.
How to stabilize wood against shrinking and swelling in variable atmospheric moisture conditions is important to the wood-using industry and a challenge to research. Polyethylene glycol stabilize wood by bulking the fiber. PEG also serve as a chemical seasoning agent, suppress decay in high concentrations, and have slight effect on physical properties, gluing or finishing. The study designed to determine the effect of PEG-400 on the dimensional stabilization of local hardwoods for wood carvings that could supply a greatly expanding tourist trade and making curved furniture parts, lamp stands and other decorative objects, and possible gunstock. The species examined were 6 species, Seo-Namoo (Carpinus laxiflora), Cheungcheung-Namoo (Cornus controversa), Gorosae-Namoo (Acer mono), Karae-Namoo (Juglans mandshurica), Jolcham-Namoo (Quercusserrata) and Sanbud-Namoo (Prunus sargentii), used as block of 5cm thick radially to the grain, 7cm wide tangentially, and 70cm long parallel to the wood grain. All these test piecies were conditioned above the fiber saturation point before impregnation. The stabilization effects were determined for PEG-400 treated woods in a 50 percent solution for 20 days. The following conclusions were obtained. PEG retentions increased with treating time. It was more effective to treat at 60$^{\circ}C$ than at room temperature. In degree of PEG-400 impregnation on species, Cheungcheung-Namoo havinglow specific gravity had the highest retentions, 68.77% but the lowest, 56.33% was shown in Jolcham-Namoo with high specific gravity. Specific gravity of treated wood increased considerably with effectiveness of polymer loading. The increases in specific gravity were 5.36 to 13.16 percent. The highest was Jolcham-Namoo, the lowest Karae-Namoo. On the dimensional stability, a 40 percent of effectiveness of polymer loading was just as effective as 60 percent in reduction in water absorptivity (RWA), antishrinkage efficiency (ASE) and antiswelling efficiency (AE), and from over 60 percent they increased more rapidly. Also species response varied considerably. ASE was 30.12 to 69.97 percent tangentially and 27.86 to 56.37 percent radially, AE 34.06 to 73.76 percent tangentially and 30.11 to 70.12 percent radially, and RWA 42.31 to 65.32 percent. No differences in volume swelling among the 6 species were observed. Its values were ranged from 14.98 to 19.55 percent and also increased with PEG retentions. On the mechanical properties, the strengths very much decreased with PEG-400 loadings as shown in Figure 12; that were 11.41 to 22.90 percent in compression, 21.61 to 34.35 percent in bending and 22.83 to 36.83 percent in tensile strength. PEG retention in cell wall was less than 1 percent and the most of PEG were immersed in cell lumen. Except for Korae-Namoo, effectivenesses of polymer loading were as much high as 61.58 to 75.02 percent. This is believed to be due to the effect of PEG-400 on excellant dimensional stability of treated woods.
본 연구의 목적은 국산 구조용 집성재를 대상으로, 제조과정의 탄소배출을 정량화하고 탄소배출 저감방안을 제시하는 것이다. 총 2개소의 구조용 집성재 제조업체를 대상으로 원료, 수송, 제조 공정, 제조에 의한 에너지소비량 등을 현장 실사하였다. 현장에서 수집한 자료 및 구축된 전과정목록과 같은 관련문헌을 토대로 단위부피당 탄소배출을 정량화하였다. 국산 구조용 집성재의 제재 및 건조, 집성 공정별 온실가스 배출결과는 각각 31.0, 109.0, 94.2 kg $CO_2eq./m^3$으로 나타났다. 수입 구조용 집성재와 비교하였을 때 약 13% 온실가스를 적게 배출하는 것으로 나타났다. 또한 기존의 건조 에너지원을 바이오매스로 전환시에는 기존 대비 37%의 온실가스를 감축하여 친환경성을 제고할 수 있을 것으로 판단되었다. 본 결과는 향후 목조주택의 환경성을 규명하기 위한 전과정평가 수행 시, 투입된 목재제품의 전과정목록분석을 위한 기초자료로 활용될 것으로 기대된다.
하상재료 조사는 유사량 계산 및 하상변동과 같은 하도 계획에 필요한 기초 자료로서 입도분포, 비중, 다공성 등을 조사하는 것이다. 원칙적으로, 조사 지점은 하천 종단 방향으로 1 km 간격이고 하나의 횡단면에 3 개 이상이다. 따라서 조사 대상 하천의 종단 길이에 따라 조사 지점이 아주 많아지기 때문에 조사에 소요되는 시간과 비용이 상당히 증가한다. 본 연구는 입도분석법인 체적법과 화상해석법의 작업 효율성과 비용을 비교하고, 화상해석법의 적용 가능성을 검토하였다. 화상해석법에 의하여 환산된 등가원의 직경이 하상재료 입도분석에 적용될 수 있음을 확인하였다. 또한, 체적법과 화상해석법의 작업효율성과 비용을 분석한 결과 약 80%의 절감효과가 있음을 입증하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.