• 한국산림과학회지
• /
• 제81권1호
• /
• pp.21-29
• /
• 1992

본(本) 연구(硏究)는 강원도(江原道) 인제군 기린면 진동리 소재(所在) 천연(天然) 혼효임분(混淆林分)의 구조(構造) 파악(把握)을 통하여 작업종(作業種) 결정(決定)을 위한 기초자료(基礎資料)를 제공(提供)하기 위하여 실행(實行)되었다 이를 위하여 대상(對象) 임분(林分)의 직경(直徑), 분포(分布), 수고(樹高) 분포(分布), 그리고 경급별(徑級別) 재적(材積) 분포(分布)가 분석(分析)되었고 이를 이용(利用)하여 택벌임(擇伐林)의 가능성(可能性)이 검토(檢討)되었다. 1. 직경(直徑) 분포(分布)는 전형적(典型的)인 택벌임(擇伐林)에서 볼 수 있는 지수감소형(指數減少型) 구조(構造)를 나타냈고 수고(樹高) 분포(分布)에서도 택벌림(擇伐林)으로 유도(誘導)될 수 있는 높은 가능성(可能性)을 보였는데 이는 이 대상(對象) 임분(林分)이 자생(自生) 천연림(天然林) 특유(特有)의 복층림(複層林) 구조(構造)를 소유(所有)하고 있기 때문이다. 그러나 경급별(徑級別) 재적(材積) 분포(分布)에서는 택벌(擇伐) 임형(林型)에 이르지 못한 미성숙(未成熟) 구조(構造)를 보이고 있는데 그 이유(理由)는 30cm 이상(以上)의 경급(徑級)에서의 본수(本數)의 부족(不足)에 기인(起因)한 것으로 판단(判斷)된다. 이러한 구조상(構造上)의 부확실성(不確實性)은 앞으로의 연구에서 밝혀져야 하는데 특(特)히 직경(直徑)과 재적(材積) 생장율(生長率)의 추정(推定)에 의한 미래(未來) 임분(林分) 구조(構造)의 파악(把握)이 시급(時急)한 것으로 보인다.

• Radiation Oncology Journal
• /
• 제12권2호
• /
• pp.243-252
• /
• 1994

원격조종 아프터로딩에 의한 고선량율 관내삽입조사는 체내 발생된 종양에 방사선원을 근접시켜 치료하는 방사선요법으로서 신속한 선량계산과 선량의 정확성 및 다양한 모양의 최적선량분포가 요구된다. 저자들은 크기가 작고 선량율이 높은 고선량율의 방사성동위원소에 대한 정확한 조사선량과 최적선량분포를 얻기 위하여 수학적인 콤퓨터 계산프로그램과 실측으로서 비교하였다. 고선량율 선원에 의한 방사선 조사선량과 조직내 흡수선량분포는 각각 Sievert적분식과 Meisberger의 다항식을 이용하여 작성하였다. 종양크기와 모양에 가장 알맞는 선량분포의 최적화를 실현하기 위하여 저자들은 치료기준점의 선량을 일정한 값으로 고정시키고 선원의 조사시간을 조정하는 선형반복 계산방정식을 이용하였다. 모형선원이 장착된 아프터로딩관을 삽입하고 조준엑스선으로 촬영하여 종양부위를 결정한 후 콤퓨터의 도움으로 아프터로딩관의 축과 평행한 등량곡선 또는 과일모양의 선량분포 및 기관지 모양의 등선량분포가 성취되도록 선량최적화를 시행하였고 선량계에 의한 실측치와 오차가 $3\%$이하로 잘 일치하였다.

• Structural Engineering and Mechanics
• /
• 제88권6호
• /
• pp.551-567
• /
• 2023

In this work, the free vibration analysis of functionally graded material (FGM) sandwich plates with porosity is conducted using the p-version of the finite element method (FEM), which is based on the first-order shear deformation theory (FSDT). The sandwich plate consists of two face-sheet layers of FGM and a homogeneous core layer. The obtained results are validated using convergence and comparison studies with previously published results. Five porosities distribution models of FGM sandwich plates are assumed and analyzed. The effect of the thickness ratio, boundary conditions, volume fraction exponents, and porosity coefficients of the top and bottom layers of FGM sandwich plates on the natural frequency are addressed.

• Structural Engineering and Mechanics
• /
• 제69권6호
• /
• pp.637-649
• /
• 2019

In the current research paper, a quasi-3D beam theory is developed for free vibration analysis of functionally graded microbeams. The volume fractions of metal and ceramic are assumed to be distributed through a beam thickness by three functions, power function, symmetric power function and sigmoid law distribution. The modified coupled stress theory is used to incorporate size dependency of micobeam. The equation of motion is derived by using Hamilton's principle, however, Navier type solution method is used to obtain frequencies. Numerical results show the effects of the function distribution, power index and material scale parameter on fundamental frequencies of microbeams. This model provides designers with guidance to select the proper distributions and functions.

• 한국분말재료학회지
• /
• 제11권5호
• /
• pp.363-368
• /
• 2004

In the present study, the focus is on the analysis of the effect of the mold dimensions on the temperature distribution of a die during plasma activated sintering. The temperature distribution of a cylindrical mold with various dimensions was measured using K-type thermocouples. The temperature homogeneity of the die was studied based on the direction and dimensions of the die. A temperature gradient existed in the radial direction of the die during the plasma activated sintering. Also, the magnitude of the temperature gradient was increased with increasing sintering temperature. In the longitudinal direction, however, there was no temperature gradient. The temperature gradient of the die in the radial direction strongly depended on a ratio of die volume to punch area.

• The Journal of the Acoustical Society of Korea
• /
• 제23권1E호
• /
• pp.31-39
• /
• 2004

Backscattered underwater signals from multiple scatterers contain information regarding resolvable spatial distribution of scatterers. This experimental study describes the spectral characteristics of backscattered signal from multiple scatterers, which are regularly or randomly spaced, in terms of their amplitude and phase and a proper signal analysis that will eventually provide scatterer spacing estimation. Air-filled tubes suspended in water, steel balls and plastic tubes buried in the sediment are the multiple scatterers. The cepstrum and the spectral autocorrelation (SAC) methods were used to estimate the scatterer spacing from the backscattered signals. It was found that the SAC method could be improved by employing singular value decomposition (SVD) to extract the effective rank for the spectral components. Unlike the conventional method of estimating the density of scatterers within the insonified volume of water, this type of estimation method would provide better understanding of the spatial distribution of scatterers in the ocean.

• 한국연초학회지
• /
• 제19권1호
• /
• pp.18-23
• /
• 1997

The study was carried out to clarify reasonable production of healthy seedling, optimal Pot depth, and appropriate transplanting time, which can be deduced from understanding of seedling quality. Seedling quality results from growth of root and shoot, morphology and distribution of root system under influence of Pot depth during seedling growing period. Stem height, shoot dry weight, leaf area and leaf number were increased in proportion to depth of pots. Growth of shoot and root during seedling growing period showed the most dramatic development between 20th and 25th day after temporary planting. Root number increased as pot depth decrease and total root length and dry weight increased as pot depth increase. In 5cm pot, relative multiplication rate was higher and mean extension rate was lower than other depth of Pot. The limitation of pot volume in which rhizosphere was located enhance the development of roots of second and third order. At 20th days after temporary Planting root distribution was relatively uniform in length and development of adventitious root on stem base was poor as Pot depth decreased.

• 한국공작기계학회논문집
• /
• 제10권1호
• /
• pp.65-70
• /
• 2001

The hear transfer mechanism initiating the friction welding is examined and a transient three dimensional heat conduc-tion model for the welding of two dissimilar cylindrical metal bars is investigated. The cylindrical metal bars are made of materials made of A2024 and SM 45C. Numerical simulations of heat flow are performed using the finite volume method. Respectively. Commercial FLUENT code is used in the heat flow simulation and maximum temperature and distribution of temperature are calculated. Temperature of friction welded joining face is compared with the temperature distribution measured by experiment and numerical simulation. The maximum temperature of friction welded joining face is lower than melting point of A2024-T6 aluminum alloy using insert metal. The temperature distribution of friction welded join- ing face with insert metal is more uniform than that of without inset metal.

• Bulletin of the Korean Chemical Society
• /
• 제20권10호
• /
• pp.1209-1212
• /
• 1999

The entropies and chemical potentials of hard-sphere solutes solvated in hard-sphere solids were calculated by Monte Carlo method using the radial free-space distribution function. This method is based on calculating the entropy by comparing the free volume of a molecule with that of an ideal gas, and is applicable even when the size of solute is very large and the solvent is a solid. When the diameter of hard-sphere solute is small the solute molecule behaves as like as a fluid in solid structures, but when the diameter of solute becomes large, a fluid-to-solid phase transition takes place. The fluid-to-solid phase transition occurs at the region of the smaller size of solute with the more increase of solvent density. The least square fit values of analytical form of the radial free-space distribution functions of solute molecules are presented for future uses.

• 한국세라믹학회지
• /
• 제30권5호
• /
• pp.411-419
• /
• 1993

A process for the preparation of cobalt oxide powders was developed by the evaporaton of emulsion containing cobalt. The characteristics of powders were examined by means of DTA, X-ray diffracton, SEM, PSA. Cobalt oxide powders were produced by evaporating the emulsion prepared by mixing cobalt sulfate solution and organic phase consisted of kerosene, Span 80 and D2EHPA in the kerosene bath at 16$0^{\circ}C$, then the precursor obtained was calcined at 100$0^{\circ}C$. As the concentration of cobalt ions in the aqueous solution, Span 80 and the stirring speed increased, the mean size of cobalt oxide powders decreased and the size distribution was improved. At the volume ratio of one of the aqueous to organic phase, the finest mean size and the optimum size distribution was obtained. On the other hand the concentration of D2EHPA and liquid paraffin had little effect on the mean size as well as on the size distribution of powders.