• 대한기계학회논문집A
• /
• 제21권5호
• /
• pp.780-790
• /
• 1997

In this study, the stress-strain relations of steels have been calculated as a function of microstructural morphologies of each phase by use of FEM program(i.e. ABAQUS). The mechanical behavior of low carbon steels is affected by the microstructural factors such as yield ratio, volume fraction, shape and distribution of each phase and so on. The effects of shape, volume fraction and yield ratio of each phase on the mechanical behavior were analyzed by using unit cell and whole specimen size models. Results obtained are summarized as follows. As the yield ratio of hard phase to that of soft phase and volume fraction of hard phase were increased, stress level of flow curves were increased. It was found that in whole specimen size model, as the particle size was decreased, higher stress level was shown. Lastly the relationship between microstructure and tensile properties was examined by using the steels with various microstructural morphologies.

• 대한한방소아과학회지
• /
• 제23권2호
• /
• pp.131-144
• /
• 2009

Objectives : The purpose of this study is to have better data and to make efficient clinical reviews on pre-school children's growth based on two measurements; Body composition for measuring body volume and bone age for potential growth. Methods : The study was conducted with 221 children(118 of boys and 103 of girls) from three kindergartens. Body compositions(soft lean mass, body fat mass, percent body fat) were measured by bioelectrical impedance analysis, bone age was measured by bone density through ultrasonic image of calcaneus. Results and Conclusions : 1. The higher level on weight or BMI, the more averages of soft lean mass, body fat mass, percent body fat. 2. The average bone ages and bone age-chronological age were lower in under 50 percentile's group, but it was higher in upper 50 percentile's group. Also, children with high BMI had older in bone ages and bone age-chronological age. 3. The higher in height percentile based on the bone age; there were more soft lean mass. 4. The averages of bone age and bone age-chronological age were significantly decreased, the more percentiles of height according to bone age were big, they were higher than total average in under 50 percentile's group of height, lower than total average in over 50 percentile's group of height in both boys and girls. 5. The average of MPH were significantly decreased in top percentiles of children's height distribution. Also, in the upper percentiles of height distribution based on bone age were big in only boys. 6. The body compositions(soft lean mass, body fat mass, percent body fat) were related to body volume growth, which can he measured by weight or BMI. The bone age, bone age-chronological age, and MPH were related in terms of hight. The body volume growth was a little hit related with potential growth.

• Geomechanics and Engineering
• /
• 제31권1호
• /
• pp.99-112
• /
• 2022

The present study examines the natural frequencies (NFs) of perfect/imperfect functionally graded sandwich beams (P/IP-FGSBs), which are composed of a porous core constructed of functionally graded materials (FGMs) and a homogenous isotropic metal and ceramic face sheets resting on elastic foundations. To accomplish this, the material properties of the FGSBs are assumed to vary continuously along the thickness direction as a function of the volume fraction of constituents expressed by the modified rule of the mixture, which includes porosity volume fraction represented using four distinct types of porosity distribution models. Additionally, to characterize the reaction of the two-parameter elastic foundation to the Perfect/Imperfect (P/IP) FGSBs, the medium is assumed to be linear, homogeneous, and isotropic, and it is described using the Winkler-Pasternak model. Furthermore, the kinematic relationship of the P/IP-FGSBs resting on the Winkler-Pasternak elastic foundations (WPEFs) is described using trigonometric shear deformation theory (TrSDT), and the equations of motion are constructed using Hamilton's principle. A closed-form solution is developed for the free vibration analysis of P/IP-FGSBs resting on the WPEFs under four distinct boundary conditions (BCs). To validate the new formulation, extensive comparisons with existing data are made. A detailed investigation is carried out for the effects of the foundation coefficients, mode numbers (MNs), porosity volume fraction, power-law index, span to depth ratio, porosity distribution patterns (PDPs), skin core skin thickness ratios (SCSTR), and BCs on the values of the NFs of the P/IP-FGSBs.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권6호
• /
• pp.886-890
• /
• 1999

From previous studies, there is a strong possibility in buffaloes that the marked increase in blood volume (BV) under hot conditions contributes to heat transportation from the rectum to the skin. The present study was done to clarify changes with environmental temperature on water-shift between blood and extracellular fluid (ECF), heat distribution between the rectum and the skin, and blood flow rates (BFR) at the hind legs (reflecting the skin surface). Four buffaloes and four Friesian cows were successively exposed to three different temperatures of $20^{\circ}C$, $30^{\circ}C$ and $35^{\circ}C$. BV and ECF volume were measured with Evans' blue and sodium-thiocyanate dilution methods, respectively. Rectal and subcutaneous (as the skin) temperatures were measured by copper-constantan thermocouples. BFR were measured by a supersonic blood flow meter. With an increase in environmental temperature, skin temperature in buffaloes increased significantly than cows, but rectal temperature was not significantly different between two species. BV, especially plasma compartment, increased significantly in only buffaloes, while ECF volume did not change in both species. BFR increased significantly in buffaloes, but not in cows. From these results, the increased of BV may be caused by water flowing from ECF compartment. The water-shift may induce the increase of BFR and skin temperature. It is suggested in the present study that internal changes of blood compartment in buffaloes contribute to transfer of heat to the skin surface.

• Journal of Biosystems Engineering
• /
• 제35권3호
• /
• pp.182-188
• /
• 2010

Post-Harvest processing engineering is a field that studies prevention of the quality change of agricultural products during sorting, packaging, storage, and distribution after harvested. In distribution steps, agricultural products could be damaged by physical force, it is the main reason of low quality and they lost value of commodities. This study was performed to find the vibration characteristics of the peach, and to find the extent of the damage on the peach by fatigue stress. The vibration data was obtained on expressway and the vibration characteristics of peach was used to find the damage on the peach. To analyze the vibration characteristics of peach, the resonance frequency and vibration transmissibility were measured. The resonance frequency of the peach was 167.98 Hz and the transmissibility was 4.06 at resonance point. It was 150 ~ 250 Hz that the transmissibility was more than 1. And the transmissibility in simulated test was measured. When the trasmissibility was more than 1, the range was 15 ~ 65 Hz, and when it was less than 1, the range was 65 ~ 175 Hz. When the transmissibility was about 1, the range was 5 ~ 15 Hz. The damage and the vibration cycle numbers of peaches were compared with input frequency and acceleration. More damage and less cycle number happened in 30 Hz than in 62.5 Hz. The reason was that the transmissibility of 30 Hz was higher and the vibration displacement in lower frequency was more. The more acceleration and cycle number increased, the more the bruising volume of peaches increased. The bruising volume ratio for vibration fatigue was measured according to input acceleration and cycle number. Using measured data, regression models for bruising volume ratio(BVR) was developed as a function of the acceleration(A) and cycle number(CN) as follows. BVR = a * $A^b*$ $(CN)^c$

• 한국의류산업학회지
• /
• 제18권5호
• /
• pp.695-707
• /
• 2016

This study presents quantitative evaluation standards for the shape fitness test, conducted in the process of the slacks fit test. This study aims to quantify appearance sensory test of slacks for the objectification of qualitative evaluation methods in existing shape fitness tests. The subjects were women of standard body type between the ages of 18 and 24. Slacks differing in their ease in waist girth, hip girth, crotch length and knee length were designed to test their shape fitness. The gap volume distribution between the body and slack, angle of the baseline by body part, and ratio of total thickness from the sideline using 3D human body scan data (which reflect the results of the appearance sensory test) were presented as quantitative evaluation standards. There were less wrinkles in the wrinkle/overstretch and ease categories of the appearance sensory test; in addition, ease was adequate and small enough to comfortably perform basic human activities in the standing upright posture. The gap volume distribution analysis between body and slacks showed that curves increased in the slacks surface along with an increase of ease in slacks and suggested that wrinkles also increased. In the baseline's horizontal categories in terms of a $0^{\circ}$ horizontal angle, the range of angles were evaluated as adequate by the clothing expert group. The total thickness ratio of 0.5:0.5 divides into the sideline from the baseline.

• 한국항만학회지
• /
• 제7권2호
• /
• pp.37-60
• /
• 1993

Because of the rapid growing traffic volumes of cargo, especially between Seoul and Inchon, and lack of investment into transport infrastructure in the past, in Kyong-in area have suffered from the serious traffic congestion in the public-road and the express-way network, But the further expansion of the traffic volume in near future is difficult due to burden of the higher expansion of the traffic volume in near future is difficult due to burden of the higher construction cost. Although the traffic congestion on the Kyung-in railway, is not very serious comparing with the road sector, the shortage of capacity on some main lines becomes emerged as a problem as railway traffic has increased. Unlike these two modes, the water transport, which has been paid relatively less attention for commodity transport in Kyong-in area, has not any constaint in this respect. Han river has been used as a water transport route in Chosun Dynasty which is called Cho-wun. This paper therefore aims to propose the availability of Han river as the alternative water transportation mode, in order to decrease the congestion between Seoul-Inchon by considering the construction of Kyong-in artificial water channel in near future. In this paper, we investigate the availability of Nanji-do as the physical distribution depot connecting with the circulation express way in the national capital distribution depot connecting with the circulation express way in the national capital. We also estimate the traffic volume by using the push-barge carrier (300DWT) in the same channel through the simulation under some assumptions such as ship's turnaround time, speed, etc.

• 해양환경안전학회지
• /
• 제23권5호
• /
• pp.541-548
• /
• 2017

본 연구에서는 해양플랜트설비 건조 현장에서 사용되고 있는 기존 고온 오일 플러싱 장비에 대한 성능개선을 위해 기존의 플러싱 장치에 사용되던 오일에 질소가스를 혼합한 고온 오일 플러싱 시스템에 대하여 국제표준화기구 코드(ISO code)를 기준으로 이론적 연구를 수행하였다. 연구를 위해 오일-질소가스 혼합유체 플러싱 시스템 공정을 설계 후 청정성능에 영향을 주는 혼합유체의 혼합비율, 온도, 레이놀즈수 및 액상분율 등에 대한 공정모사 결과도 분석하였다. 그 결과 관 직경과 가스상의 체적분률이 일정한 상태에서 혼합유체의 체적유량이 증가될수록 수평 유압배관 입출구의 액상분율 차이 ${\Delta}{\alpha}_L$ 값은 증가하게 되고 배관길이 방향의 위치에 따라 오일과 질소가스 기포 사이의 상분포가 달라짐을 확인했다. 이러한 상분포의 변화는 오일-질소가스 혼합유체 플러싱 시스템의 청정성능에도 커다란 영향을 줄 것으로 예상된다.

• 유통과학연구
• /
• 제13권11호
• /
• pp.123-130
• /
• 2015

Purpose - Due to highly elevated levels of competition, many companies today have to face the problem of decreasing profits even when their actual sales volume is increasing. This is a common phenomenon that is seen occurring among companies that focus heavily on quantitative growth rather than qualitative growth. These two aspects of growth should be well balanced for a company to create a sustainable business model. For supply chain management (SCM) planners, the optimized, quantified flow of resources used to be of major interest for decades. However, this trend is rapidly changing so that managers can put the appropriate balance between sales volume and sales quality, which can be evaluated from the profit margin. Profit optimization is a methodology for companies to use to achieve solutions focused more on profitability than sales volume. In this study, we attempt to provide executional insight for companies considering implementation of the profit optimization system to enhance their business profitability. Research design, data, and methodology - In this study, we present a comprehensive explanation of the subject of profit optimization, including the fundamental concepts, the most common profit optimization logic algorithm -linear programming -the business functional scope of the profit optimization system, major key success factors for implementing the profit optimization system at a business organization, and weekly level detailed business processes to actively manage effective system performance in achieving the goals of the system. Additionally, for the purpose of providing more realistic and practical information, we carefully investigate a profit optimization system implementation case study project fulfilled for company S. The project duration was about eight months, with four full-time system development consultants deployed for the period. To guarantee the project's success, the organization adopted a proven system implementation methodology, supply chain management (SCM) six-sigma. SCM six-sigma was originally developed by a group of talented consultants within Samsung SDS through focused efforts and investment in synthesizing SCM and six-sigma to improve and innovate their SCM operations across the entire Samsung Organization. Results - Profit optimization can enable a company to create sales and production plans focused on more profitable products and customers, resulting in sustainable growth. In this study, we explain the concept of profit optimization and prerequisites for successful implementation of the system. Furthermore, the efficient way of system security administration, one of the hottest topics today, is also addressed. Conclusion - This case study can benefit numerous companies that are eagerly searching for ways to break-through current profitability levels. We cannot guarantee that the decision to deploy the profit optimization system will bring success, but we can guarantee that with the help of our study, companies trying to implement profit optimization systems can minimize various possible risks across various system implementation phases. The actual system implementation case of the profit optimization project at company S introduced here can provide valuable lessons for both business organizations and research communities.

• 대한공간정보학회지
• /
• 제16권1호
• /
• pp.75-81
• /
• 2008

본 연구의 목적은 공단지역의 환경개선과 폐수위탁관리체계의 투명성을 확보하기 위해 GIS를 활용한 공장폐수 위탁관리 시스템의 구축방안에 대하여 연구하는데 있다. 공장폐수 위탁 및 수탁처리 전산관리 시스템은 공장폐수 위탁 및 수탁관련 정보 입력과 위탁확인서 출력을 위한 위탁 및 수탁 관리 시스템, 관리자가 기간별, 업종별, 폐수종류별, 업체별 위탁량을 통계분석 할 수 있는 통계분석 시스템, 위탁 업체 및 수탁업체의 공간정보와 공장폐수 위탁량 및 수탁량 분포도를 시민들에게 제공하는 WebGIS 시스템으로 구성하였다. 구축된 공장폐수 위탁관리시스템은 폐수의 발생 시점에서부터 완전 처리까지의 전 과정에서의 정확하고 확실하게 파악할 수 있을 것으로 판단된다. 업무의 전산화로 업무처리 시 발생되는 시간적, 경제적 손실을 저감할 수 있을 것으로 판단된다. 또한 공장폐수에 대한 정확한 발생량을 관리함으로써 인천지역에서 발생되는 수질오염사고를 사전에 예방하고 오염사고 발생 시 신속한 대처방안을 도출 할 수 있을 것으로 판단된다. WebGIS를 이용`한 공장폐수의 위탁량 및 수탁량 분포를 관리함으로써 시민들의 환경오염에 대한 생각을 고취시키고 지속적인 관리가 가능 할 것으로 판단된다.