• 한국응용과학기술학회지
• /
• 제34권4호
• /
• pp.1112-1120
• /
• 2017

석유제품은 다양한 형태의 탄화수소화합물로 구성되어진 화합물로, 다른 종류의 액체류와 마찬가지로 온도변화에 따른 밀도와 부피의 변화가 발생한다. 액상에서 석유제품의 밀도를 측정하는 방법은 분별 증류된 각 석유제품에 대해 주로 얻어진 실험 데이터를 기반으로 한다. 본 연구에서는 등유와 자동차용 경유의 온도변화에 따른 밀도와 부피변화를 실제 측정하여 온도변화에 따른 변화추이를 분석하고, 국제규격인 ASTM에서 제시하는 밀도부피 환산표를 이용한 환산값을 계산하고 두 값을 비교분석하였다. 또한, 국내 계량 관련법에서 규정하고 있는 온도변화에 대한 기준과 실측값과의 상호 비교를 통해 차이점을 분석하였다.

• 한국멀티미디어학회논문지
• /
• 제18권2호
• /
• pp.158-167
• /
• 2015

This study presents a new method to improve the speed of high quality volume rendering. We improve the speed of ambient occlusion which is one of the global illumination techniques used in traditional volume visualization. Calculating ambient occlusion takes much time because it determines an illumination value of a sample by integrating opacities of nearby samples. This study proposes an improved method for this by using local statistics such as averages and standard deviations. We calculate local statistics for each volume block, a set of nearby samples, in pre-processing time. In the rendering process, we efficiently determine the illumination value by assuming the density distribution as a normal distribution. As the results, we can generate high quality images that combine ambient occlusion illumination with local illumination in real time.

• Nuclear Engineering and Technology
• /
• 제42권2호
• /
• pp.175-182
• /
• 2010

As part of a fundamental study on the volume reduction of contaminated concrete wastes, the separation characteristics of the aggregates and the distribution of the radioactivity in the aggregates were investigated. Radioisotope $^{60}Co$ was artificially used as a model contaminant for non-radioactive crushed concrete waste. Volume reduction for radioactively contaminated dismantled concrete wastes was carried out using activated heavy weight concrete taken from the Korea Research Reactor 2 (KRR-2) and light weight concrete from the Uranium Conversion Plant (UCP). The results showed that most of the $^{60}Co$ nuclide was easily separated from the contaminated dismantled concrete waste and was concentrated mainly in the porous fine cement paste. The heating temperature was found to be one of the effective parameters in the removal of the radionuclide from concrete waste. The volume reduction rate achieved was above 80% for the KRR-2 concrete wastes and above 75% for the UCP concrete wastes by thermal and mechanical treatment.

• 한국진공학회지
• /
• 제2권4호
• /
• pp.491-500
• /
• 1993

The adsorption of nitrogen (77K) and carbon dioxide(273K) was performed on a series of activated carbon fiber. Theadsorption iotherm of nitrogen was typical type 1 and that of carbon dioxide was convex. As the specific surface area increases, there are linear increases in BET constant C mean pore diameter, the width of pore size distribution, wide micropore volume, total micropore volume, total pore volume and external surface area, however, narrow micropore volume was nealy constant . The total micorpore volume fraction in total pore volume is above 97%.

• 한국ITS학회 논문지
• /
• 제18권5호
• /
• pp.79-90
• /
• 2019

본 연구에서는 국내의 연속류 자전거도로에 대한 차두시간 분포 모형을 개발하고자 하였다. 현장조사를 통해 수집된 데이터를 교통량으로 구분하여 분석하였으며, 교통량의 기준은 전체 교통량을 분포를 고려하여 1분당 8대 미만은 낮은 수준의 교통량으로 하고 8대 이상은 높은 수준의 교통량으로 구분하였다. 차두시간의 집계간격은 기존의 자동차교통류에서 일반적으로 적용해오던 0.5초를 적용하였다. 적용된 분포는 기본적인 정규분포와 함께 음지수분포, 전이된 음지수분포, 피어슨 III분포이며, 카이스퀘어 검정 분석결과 음지수분포와 전이된 음지수분포에서 방향과 교통량 구분 모두에서 이론치와 관측치간에 적합한 것으로 나타났다. 제시된 자전거 차두시간 분포모형의 적정성을 판단하기 위한 분석결과, 역시 동일하게 음지수분포와 전이된 음지수분포가 적합한 것으로 나타났다.

• International Journal of Concrete Structures and Materials
• /
• 제2권2호
• /
• pp.161-167
• /
• 2008

Optimization of concrete mixing system is very important for the production of quality mixture of concrete and requires very complicated, specialized knowledge as there are a variety of variables that influence the result. One of the methods of optimizing the concrete mixing system is to minimize the volume of cement paste which, in turn, means maximizing the volume of aggregate. The purpose of this study is to determine the minimum volume of cement paste used in the design of concrete mixture and to design the optimum concrete mixing system based on the fluidity of mortar and concrete. In determining the minimum volume of cement paste, experiments of mortar and concrete were performed based on their workability, material segregation and bleeding. Type of aggregate, granularity distribution and sand percentage were used as test parameters and measurements were taken of the distribution of granularity, usage of HRWRA, minimum volume of paste and drying shrinkage and compressive strength of concrete.

• 한국추진공학회지
• /
• 제12권5호
• /
• pp.1-8
• /
• 2008

소형 액체로켓엔진 인젝터 분무의 공간분포 특성 규명을 위해 이중모드 위상도플러속도계(DPDA)를 이용한다. 분사압력 및 분무확산방향 이동거리를 변화시켜 분무액적의 크기, 속도 등을 측정하고, 산술평균직경(AMD), Sauter 평균직경(SMD), 수밀도, 스팬(span of drop size distribution), 그리고 체적 유속(volume flux) 등의 분무 매개변수를 도출하여 인젝터 분무의 분열특성을 고찰한다. 분사압력이 증가함에 따라 분무액적의 수밀도, 스팬, 그리고 체적 유속은 증가하지만, AMD는 감소하였다.

• Bulletin of the Korean Chemical Society
• /
• 제8권3호
• /
• pp.150-155
• /
• 1987

A new method of measurement of pore volume distribution in a porous material by adsorption of gases is proposed. In the newly proposed method the use of spherical molecules with relatively large molecular weight as adsorbates is strongly recommended to eliminate the troubles caused by stereospecificity and low boiling point of widely used $N_2$. It is also claimed that the universal t-curves that have been widely used since proposed by de Boer et al. must be replaced by the flat-surface isotherms that can be derived from the theory proposed by Chang et al. The results of analysis of pore volume distribution based on the method described in this paper are found to be reasonable and satisfactory.

• Reproductive and Developmental Biology
• /
• 제34권3호
• /
• pp.153-159
• /
• 2010

The 34 potently pig pheromonal odorants (1-32, 5755 & 7113) through structure-based virtual screening and ligand-based virtual screening method were selected and their ADMET and pharmacokinetics characters were evaluated and discussed quantitatively. The pheromonal odorants were projected on the following pre-calculated models, Caco-2 cell permeability, blood-brain barrier permeation, hERG inhibition and volume-distribution. From the results of in silico study, it is found that an optimal compound (31) either penetrating or have a little ($P_{caco2}$=-8.143) for Caco-2 cell permeability, moderate penetrating ability ($P_{BBB}$=0.082) for blood-brain barrier permeation, the low QT prolongation ($P_{hERG}$=1.137) for the hERG $K^+$ channel inhibition, and low distribution into tissues ($P_{VD}$=-5.468) for volume-distribution. Therefore, it is predicted that the compound (31) a topical application may be preferable from these based foundings.

• 산업기술연구
• /
• 제29권B호
• /
• pp.221-228
• /
• 2009

For a stable supply of electric power, periodical inspection of the electric facilities and repair of the distribution lines are required. In case of any unexpected accidents, looped operation among distribution lines may be necessary in order to supply electricity through the sound lines, separating the faulted lines. As a result of this study, it was found that normal looped operation became impossible when phase difference of the looped distribution lines is more than 3 degrees compared with the voltage supply of the distribution lines. Therefore, for a stable supply of electric power to Chuncheon, it is judged to be desirable that looped operation of the distribution lines coming from the same substation M. Tr Bank shall be performed in principle and in case of looped operation with the substation of different system, looped operation among the lines shall be performed after voltage regulation of the substation M. Tr Bank, maintaining similar voltages and load supply volume in order to avoid phase difference through checking the operation conditions of each substation M. Tr Banks. And when looped operation among the distribution lines is scheduled, voltage regulation schedule has been established so far by calculating maximum supply volume through the transformer of the substation and the maximum load volume through the distribution lines but in the future, looped operation of the distribution lines shall be carried out by removing voltage difference with regulating tap or load of the surrounding transformers, with giving prior notice to the substation operators.