• Computers and Concrete
• /
• 제8권2호
• /
• pp.163-176
• /
• 2011

By virtue of chord-length density function from the field of statistical physics, this paper introduced a quantitative approach to estimate the distribution of cement paste thickness between aggregates in concrete. Dynamics mixing method based on molecular dynamics was employed to generate one model structure, then image analysis algorithm was used to obtain the distribution of thickness of cement paste in model structure for the purpose of verification. By comparison of probability density curves and cumulative probability curves of the cement paste thickness among neighboring aggregates, it is found that the theoretical results are consistent with the simulation. Furthermore, for the model mortar and concrete mixtures with practical volume fraction of Fuller-type aggregate, this analytical formula was employed to predict the influence of aggregate volume fraction and aggregate fineness. And evolution of its mean values were also investigated with the variation of volume fraction of aggregate as well as the fineness of aggregates in model mortars and concretes.

• 보건행정학회지
• /
• 제14권1호
• /
• pp.89-120
• /
• 2004

The purpose of this empirical study is to test hypotheses in order to identify the cost drivers that drive indirect costs in general hospitals in Korea. In various cases' studies, it has been suggested that overhead costs are driven by volume and complexity variables, how they are structurally related and how the cost impacts of these variables can be A unique feature of the research is the treatment of complexity as an endogenous variable. It is hypothesized that level of hospital complexity in terms of the number of services provided(i.e., “breath" complexity) and the intensity of individual estimated in practice. overhead services(ie., “depth" complexity) are simultaneous determined with the level of costs needed to support the complexity. Data used in this study were obtained from the Database of Korean Health Industry Development Institute, Health Insurance Review Agency and analyzed using simultaneous equation model, path model. The results found those volume and complexity variables are all statistically signi-ficance drivers of general hospital overhead costs. This study has documented that the level of service complexity is a significant determinant of hospital overhead costs, caution should be exercised in interpreting this as supportive of the cost accounting procedures associated with ABC. with ABC.

• 상하수도학회지
• /
• 제18권1호
• /
• pp.66-72
• /
• 2004

In this study, quantity and quality of collected rainwater by sand, gravel, soil, lawn and concrete surface, as collection materials were investigated and Rainwater Collection Prediction Model was developed to predict the amount of collected rainwater. The quantity of collected rainwater in concrete surface, gravel, sand, soil and lawn collection system was 1,067L(93.2%), 1,006L(87.8%), 902L(78.8%), 800L(69.9%), 788.5L(68.8%) for 8 months period, respectively. The average turbidity of collected rainwater in concrete surface, gravel, sand, soil and lawn collection system was 3.2NTU, 2.2NTU, 1.9NTU, 1.7NTU, 1.5NTU for 8 months period, respectively. For sand collection material, predicted amount by the Model and actual collected amount were 931.5L and 902L, which were very closed. For gravel collection material, predicted amount by Model and actual collected amount were 1,028.21. and 1,006L, which were very closed. To simulate the optimal rainwater storage volume, the rainfall and evaporation data in Dae-jeon city were used. For sand collection system with 30m2 area, the maximum storage volume was $17m^3$ and 62% of the year was secured for use of 240L/day.

• 콘크리트학회논문집
• /
• 제17권5호
• /
• pp.857-868
• /
• 2005

This paper deals with the accumulated damage in concrete structures due to the cyclic freeze-thaw as an environmental load. The cyclic ice body nucleation and growth processes in porous systems are affected by the thermo-physical and mass transport properties, and gradients of temperature and chemical potentials. Furthermore, the diffusivity of deicing chemicals shows significantly higher value under cyclic freeze-thaw conditions. Consequently, the disintegration of concrete structures is aggravated at marine environments, higher altitudes, and northern areas. However, the properties of cyclic freeze-thaw with crack growth and diffusion of chloride ion effects are hard to be identified in tests, and there has been no analytic model for the combined degradations. The main objective is to determine the driving force and evaluate the reduced strength and stiffness by freeze-thaw. For the development of computational model of those coupled deterioration, micro-pore structure characterization, pore pressure based on the thermodynamic equilibrium, time and temperature dependent super-cooling with or without deicing salts, nonlinear-fracture constitutive relation for the evaluation of internal damage, and the effect of entrained air pores (EA) has been modeled numerically. As a result, the amount of ice volume with temperature dependent surface tensions, freezing pressure and resulting deformations, and cycle and temperature dependent pore volume has been calculated and compared with available test results. The developed computational program can be combined with DuCOM, which can calculate the early aged strength, heat of hydration, micro-pore volume, shrinkage, transportation of free water in concrete. Therefore, the developed model can be applied to evaluate those various practical degradation cases as well.

• Nuclear Engineering and Technology
• /
• 제41권8호
• /
• pp.1045-1052
• /
• 2009

A calculation model is developed to predict the transient free surface flow on the containment floor following a loss-of-coolant accident (LOCA) of pressurized water reactors (PWR) for the use of debris transport evaluation. The model solves the two-dimensional Shallow Water Equation (SWE) using a finite volume method (FVM) with unstructured triangular meshes. The numerical scheme is based on a fully explicit predictor-corrector method to achieve a fast-running capability and numerical accuracy. The Harten-Lax-van Leer (HLL) scheme is used to reserve a shock-capturing capability in determining the convective flux term at the cell interface where the dry-to-wet changing proceeds. An experiment simulating a sudden break of a water reservoir with L-shape open channel is calculated for validation of the present model. It is shown that the present model agrees well with the experiment data, thus it can be justified for the free surface flow with accuracy. From the calculation of flow field over the simplified containment floor of APR1400, the important phenomena of free surface flow including propagations and interactions of waves generated by local water level distribution and reflection with a solid wall are found and the transient flow rates entering the Holdup Volume Tank (HVT) are obtained within a practical computational resource.

• 한국항공우주학회지
• /
• 제44권7호
• /
• pp.593-602
• /
• 2016

본 연구에서는 근접연계방식의 초음속기체 금속분말 미립화장치에 대한 수치해석을 수행하였다. 액체금속의 미립화 과정에서 발생하는 1, 2차 액적분열을 모사하기 위해서 난류 모델을 선정하고 VOF(Volume of Fluid), DPM(Discrete Phase Model) 해석을 차례대로 수행하였다. 해석결과, Level-Set function 분포도를 통해 1차 분열액적의 직경을 계산할 수 있었으며 이 데이터를 DPM 해석에 반영해 도메인 출구에서 수집된 입자들의 최종직경분포를 확인할 수 있었다.

• 한국농공학회지
• /
• 제38권3호
• /
• pp.101-110
• /
• 1996

The aim of the work described in this paper is to develope a constitutive model for the prediction of an unsaturated clayey soil and to confirm the application of the model. To this end a series of suction controlled isotropic and triaxial compression tests are conducted on clayey soils. Matric suction is controlled by the axis translation technique using high air entry ceramic disk. Total volume change, air and water volume changes are measured by the device made for the experiment. The specimens are compacted by dynamic compaction using a half of Proctor compaction energy with the water contents of 5% drier than the optimum moisture contents. From test results, volume changes and deviator stresses are analyzed at each state and their relationships are formulated. And the application of the model to clayey soils is confirmed by the comparison between test and predicted results. During drying-wetting and loading-unloading processes for isotropic states, the agreement between predicted and test results are satisfactory. And predicted deviator stresses are well agreed with the test results in shearing process, but volumetric strain is not well agreed with the test results in high suctions.

• 한국ITS학회 논문지
• /
• 제7권5호
• /
• pp.180-183
• /
• 2008

본 논문은 교통망에서 관측 링크 교통량, 미관측 링크의 이용자평형 정보를 이용하여 O-D행렬을 수학적으로 생성하는 모형을 제시하고 있다. 교통량이 관측되지 않은 링크로부터 이용자 평형 상태에서 추출 가능한 정보를 바탕으로 일련의 논리적 연산을 거쳐 실제교통량에 근접하는 서브알고리듬을 유추하여 O-D행렬 추정의 정확도와 연산의 일관성을 제고하였다. 이를 위해 이용자평형상태에서 새로운 정리(Theorem)와 보조정리(Lemma)를 유도하여 적용하였다. 모형의 시험은 3개의 초기 O-D 행렬과 3개의 미관측 링크 교통량 시나리오를 각각의 모형에 적용하여 그 결과를 비교하였다. 적용 결과 본 논문에서 제시된 모형은 기존의 이용자균형 접근방식의 모형emf에 비해 추정된 O-D값의 실제 값과의 차이(O-D Trip RMSE)가 현저히 감소되는 것을 확인하였다.

• KSBB Journal
• /
• 제4권1호
• /
• pp.15-16
• /
• 1989

Dextran gel 섬유인 Sephadex G gels의 크기를 Ogston-Laurent 의 gel model에 의하여 측정한 결과 섬유의 길이는 $12.48{\times}10^{12}(G-200)$ cm/ ml 범위이고, 섬유의 지름과 partial specific volume은 각각 $7.21{\tiems}10^{-8}cm$와 0.586ml/g이었다.

• Journal of Welding and Joining
• /
• 제10권2호
• /
• pp.19-31
• /
• 1992

A numerical study was performed to investigate the flow field and the heat transfer characteristics occurring in high power density welding which is important in many fields of engineering applications. A two dimensional quasi-steady state of keyhole welding model is simulated by using the finite volume methods. It is shown that the shape of isothermal line is elliptic and the temperature gradient is very steep compared with other welding method and the welding speed has on welding width and observed beam power.