• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.759-770
• /
• 1997

The general flow patterns in the Cheju Strait have been investicated by analyzing the current observations measured in $1986\~1989$ by current meter mooring in 3 north-south sections in the Cheju Strait and at 4 observation points around Cheju Harbour, and measured in $1981\~1987$ by drogue tracking. 1. In the Cheju Strait, there are eastward or northeastward residual currents, which implies that sea waters flow into through the whole western section and flow out through the whole eastern section in the Cheju Strait. The velocity of residual currents are $5.2\~30\;cm/sec$ in 10 m layer and $1.3\~24cm/sec$ in mid-bottom layer. Generally, the flow is strong along the deepest through and the northern part, and weak in the shallow areas near Chuja Islands and Bogil Island. 2. In the western entrance of the Cheju Strait, the observed mean residual velocity is 6.93 cm/sec and the volume transport is 0.384 Sv. There are a big discrepancy between the observed residual currents and the geostrophic currents. 3. Near the frontal areas northwest to Chuja Islands, warm and saline offshore waters, flow northward about 5 miles into the southern coastal areas of the Korean Peninsula in flood, and flow back rather eastward or southeastward than southward in ebb. So, warm and saline waters flow along coastal areas, being mixed with coastal waters. As a result, the northwestern area of Chuja Islands plays a role of the entrance of influx of warm and saline offshore water to the southwestern coastal areas of the Korean Peninsula. It should be stressed that this flow pattern is not due to the residual flows, but to the temporal (tidal) flows.

• Journal of KIISE:Software and Applications
• /
• v.36 no.8
• /
• pp.623-632
• /
• 2009

In this paper, we propose a pulmonary nodule registration for the tracking of lung nodules in sequential CT scans. Our method consists of following five steps. First, a translational mismatch is corrected by aligning the center of optimal bounding volumes including each segmented lung. Second, coronal maximum intensity projection(MIP) images including a rib structure which has the highest intensity region in baseline and follow-up CT series are generated. Third, rigid transformations are optimized by normalized average density differences between coronal MIP images. Forth, corresponding nodule candidates are defined by Euclidean distance measure after rigid registration. Finally, template matching is performed between the nodule template in baseline CT image and the search volume in follow-up CT image for the nodule matching. To evaluate the result of our method, we performed the visual inspection, accuracy and processing time. The experimental results show that nodules in serial CT scans can be rapidly and correctly registered by coronal MIP-based rigid registration and local template matching.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.2
• /
• pp.132-141
• /
• 2017

The objective of this study was to provide fundamental information on fish swimming behavioral properties. Acoustic data was collected at nighttime from the $10^{th}$ to $12^{th}$ March, 2016 near Yokji Island in the South Sea of South Korea, and was analyzed using the fish track technique. This technique is to identify groups of single targets, which shows a pattern of systematic movement. As a result, the differences of the behavioral properties such as depth, swimming speed, vertical direction, horizontal direction, tortuosity, and depth change among days were minor; however, statistical results (Welch analysis of variance) showed significant difference between days. Especially, the target strength (TS) of the $11^{th}$ were significantly different from the $10^{th}$ and $12^{th}$. It could be assumed that gizzard shad, which was the dominant species from the catch on the $11^{th}$ March, might have affected this difference. The correlation between TS and other properties was very week. The significant difference seemed even small differences of average values because of the large data volume.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.4
• /
• pp.433-440
• /
• 2004

Since the numerical analysis was adopted in the mold design, lots of computational methods have been proposed for the simulations of casting processes for the various shaped molds. Today, it is possible to simulate the filling and solidification processes of most casts using the VOF technique. Though the three-dimensional numerical model based on the Cartesian coordinate system can be applied to any shape of cast, it becomes very inefficient when the three-dimensional model is applied to the cast of axi-symmetrical shape since the control volume includes at least 11 of the physical model. In addition, the more meshes should be distributed along the circumferential boundaries of curved shape in the Cartesian coordinate system fur the better results, while such curved circumferential boundary does not need to be considered in the two-dimensional cylindrical coordinate system. This motivates the present study i.e. developing a two-dimensional numerical model for the axi-symmetrically shaped casts. The SIMPLER algorithm, the VOF method, and the equivalent specific heat method have been adopted in the combined algorithm for the flow calculation, the free surface tracking, and the phase change heat transfer, respectively. The numerical model has been applied to the casting process of a pulley, and it was proven that the mesh and time effective calculation was accomplished comparing to the calculation using three-dimensional model.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.1
• /
• pp.1-5
• /
• 2013

The number of pedestrians is considered essential information which can be used to control a person who makes a entrance or a exit into a building. The number of pedestrians, also, can be used to help to manage pedestrian traffic and the volume of pedestrian flow within the building. Due to the fact there is incorrect detection by occluded, shadows, and illumination, however, difficulty can arise in existing system which is for detection and counts of a person who makes a entrance or a exit into a building. In this paper, it is minimized that the change of illumination and the effect of shadow through the transmitted image from camera which is created and processed with great adaptability. The accuracy of the calculations can be increase as well by using Kalman Filter and Mean-Shift Algorithm in order to avoid overlapped counts. As a result of the test, it is proved that the count method that shows the accuracy of 95.4% should be effective for detection and counts.

• Journal of Navigation and Port Research
• /
• v.44 no.5
• /
• pp.382-391
• /
• 2020

In line with the trend of global transport volume which has increased rapidly over the years, internal transportation in seaports is always conducted with high frequency. Thus, there is always much potential for traffic jams as well as high transportation costs and emissions. Many efforts have been initiated to streamline the inter-terminal container transport (ITT) through the development of automated vehicles and equipment as well as using private transport facilities to overcome these limitations. The purpose of this paper to develop a framework to design, analyze, and validate the efficiency of a new ITT system in a port area based on the monorail network and automatic vehicles. First, the number of shuttles and loaders was determined depending on the transport demand scenario. Next, a simulation model was applied to evaluate the system performance as well as gain more insight into the working process of the ITT system. Finally, by setting goals for the performance indicators, the results showed that the system was highly efficient with 100% of the containers delivered to their destination on time. Besides, a series of other performance tracking was provided to provide insight into the system's capabilities.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1455-1468
• /
• 2016

This paper presents a grid-connected dual stator-winding induction generator (DWIG) wind power system suitable for wide wind speed ranges. The parallel connection via a unidirectional diode between dc buses of both stator-winding sides is employed in this DWIG system, which can output a high dc voltage over wide wind speed ranges. Grid-connected inverters (GCIs) do not require booster converters; hence, the efficiency of wind energy utilization increases, and the hardware topology and control strategy of GCIs are simplified. In view of the particularities of the parallel topology and the adopted generator control strategy, we propose a novel excitation-capacitor optimization solution to reduce the volume and weight of the static excitation controller. When this excitation-capacitor optimization is carried out, the maximum power tracking problem is also considered. All the problems are resolved with the combined control of the DWIG and GCI. Experimental results on the platform of a 37 kW/600 V prototype show that the proposed DWIG wind power system can output a constant dc voltage over wide rotor speed ranges for grid-connected operations and that the proposed excitation optimization scheme is effective.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.8
• /
• pp.3374-3383
• /
• 2011

In this study, numerical analyses for slamming impact phenomena have been carried out using a 2-dimensional wedge shaped structure having finite deadrise angles. Fluid is assumed incompressible and entry speed of the structure is kept constant. Geo-reconstruct(or PLIC-VOF) scheme is used for the tracking of the deforming free surface. Numerical analyses are carried out for the deadrise angles of $10^{\circ}$, $20^{\circ}$ and $30^{\circ}$. For each deadrise angle, variations are made for the grid size on the wedge bottom and for the entry speed. The magnitude and the location of impact pressure and the total drag force, which is the summation of pressure distributed at the bottom of the structure, are analyzed. Results of the analyses are compared with the results of the Dobrovol'skaya similarity solutions, the asymptotic solution based on the Wagner method and the solution of Boundary Element Method(BEM).

• Journal of KIISE:Databases
• /
• v.31 no.1
• /
• pp.30-38
• /
• 2004

In many scientific and commercial applications such as Earth Observation System (EOSDIS) and mobile Phone services tracking a large number of clients, it is a daunting task to archive and index ever increasing volume of complex data that are continuously added to databases. To efficiently manage multidimensional data in scientific and data warehousing environments, R-tree based index structures have been widely used. In this paper, we propose a scalable technique called seeded clustering that allows us to maintain R-tree indexes by bulk insertion while keeping pace with high data arrival rates. Our approach uses a seed tree, which is copied from the top k levels of a target R-tree, to classify input data objects into clusters. We then build an R-tree for each of the clusters and insert the input R-trees into the target R-tree in bulk one at a time. We present detailed algorithms for the seeded clustering and bulk insertion as well as the results from our extensive experimental study. The experimental results show that the bulk insertion by seeded clustering outperforms the previously known methods in terms of insertion cost and the quality of target R-trees measured by their query performance.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.115-121
• /
• 2007

Recently, Location Based Service including tracking and way-finding services has been activated rapidly in the ubiquitous computing environment. According as the ubiquitous computing environment is developed, various types of sensor to acquire various data including location of the moving object are used widely, and acquired sensor data becomes abundant. However, the existing location management system based on a single location sensor is difficult to support LBS efficiently in the ubiquitous computing environment. In this paper, therefore, we propose the location management system in the ubiquitous computing environment that can manage the location data and the various sensor data efficiently. In addition, the location management system adopts the core technology for efficiently storing and transferring a large-volume of various data such as location data and for efficiently processing the various requests from a variety of servers and sensors. Especially, our architecture that is presented in this paper can support context-aware services and autonomous services efficiently in the ubiquitous computing environment.