• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.3
• /
• pp.201-207
• /
• 2004

High speed rotating airflow inside a HDD chamber causes sub-micron scale disk vibration that could generate significant TMR problems in most of current HDD products. Many publications are presented for the reduction of airflow excitation. One of the most effective methods widely adopted in high-end HDD products is SqueezeAir Bearing Plate (SABP). However, because of its tight assembly clearance between the damper and disk, this method could not be easily implemented in volume production. This article presents a disk damper design that is modified to be feasible for volume production by virtue of a new airflow modeling method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.803-807
• /
• 2000

This paper deals wi th the establishment of the method of non-contact surface roughness measurement by developed system. One of the most Important factor of determinating quality of a produced manufacture is surface roughness The tendency of manufacturing method is changing from small amount manufactures / high-volume production to large amount manufactures / low volume production, and the study of reducing time for surface roughness measurement has been actively investigated The non-contact surface roughness method by using laser which is different from contact method has been only used to the polished surface, so new surface roughness measurement method was adopted by virtue of Fraunhofer diffraction in the periodic surface for on-the-machine. in this paper, we establish the method of non-contact surface roughness measurement which can reduce measuring time in the periodic surface

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.184-187
• /
• 2004

The sheet parts are formed with dies conventionally. But this conventional forming process is not suited to small volume and varied production for the reason of high cost. For the solution of this problem, a new forming process, which is called CNC incremental sheet forming, is being introduced. This process can form sheet parts without die, and is very well suited to small volume and varied production in space flight and automobile. In this paper, dieless CNC forming system based on a machining center is developed. A special device to grasp and pull the blank sheet built in the machining center and tool path generation S/W from STL file of 3-D model are developed. Several sheet parts are incrementally formed to verify the effectiveness of the developed system.

• Korean Journal of Organic Agriculture
• /
• v.16 no.4
• /
• pp.391-408
• /
• 2008

The overall focus of this study was to identify marketing and promotion strategies that can maintain and enhance environmentally friendly farm and organic production and processing activities. This is particularly important as the volume of environmentally friendly farm and organic produce that is generally available is increasing, and significant players, such as Organic Marketing Initiatives(OMI) and conventional marketing co-operatives, are becoming involved in the market. The rapid increase in production of environmentally friendly farm products and organic food is creating new and more complex challenges for marketing, from vegetable box schemes large co-operatives supplying the precise quality and volume required by supermarkets. A possible strategy for many farmers is to co-operate in regionally or nationally operating marketing initiatives. The main objective of any public relations(PR) activity should to enhance publicity and to improve an OMIs image. No promotion, no perception of OMI performance.

• Journal of Intelligence and Information Systems
• /
• v.4 no.1
• /
• pp.1-10
• /
• 1998

Process planning is a very complex task and requires the dynamic informatioon of shop foor and market situations. Process plan selection is one of the main problems in the process planning. In this paper, we propose a new process plan selection model considering operation flexibility for the computer aided process planing. The model is formulated as a 0-1 integer programming considering realistic shop factors such as production volume, machining time, machine capacity, transportation time and capacity of tractors such as production volume, machining time, machine capacity, transportation time capacity of transfer device. The objective of the model is to minimize the sum of the processing and transportation time for all parts. A genetic algorithm a, pp.oach is developed to solve the model. The efficiency of the proposed a, pp.oach is verified with numerical examples.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.3
• /
• pp.193-200
• /
• 2003

In the production of internal combustion engines, there has been a move towards the development of high performance engines with improved fuel efficiency, lighter weight and smaller sizes. These trends help to answer problems in engines related to thermal load and abnormal combustion. In order to investigate these problems, a thin film-type probe for instantaneously measuring temperatures has been suggested. A method for manufacturing such a probe was established in this study. The instantaneous surface temperature of a constant volume combustion chamber was measured by this probe and the heat flux was obtained through Fourier analysis. In order to thoroughly understand the characteristics of combustion, the authors measured the wall temperature of the combustion chamber and computed heat flux through a cylinder wall while varying the protrusion height of the probe. For achieving the above goals, a instantaneous temperature probe was developed, thereby making possible the analysis of the instantaneous temperature of wall surface and the detection of unsteady heat flux in the constant volume combustion chamber.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.235-239
• /
• 1994

Polymer mortars are mainly used as protective coatings in concrete, reinforced concrete, and more rarely, steel, while polymer concretes represent a new type of structural material capable of withstanding highly corrosive environments. The mechanical properties, chemical stability, and some other useful properties are the reasons research, design, and production organizations. However polymer mortars and polymer concretes have been introduced only recently, and many of their properties are still imperfectly known. And, the main technique in producing polymer concrete is to minimize void volume in the aggregate mass so as to reduce the quantity of the relatively impressive polymer necessary for binding the aggregate. In this study, compressive strength and flexural strength of unsaturated polyester resin concrete are related to quantity of resin and solid volume of aggregate. It was founded that the more solid volume of aggregate increase, the less using quantity of resin decrease with out reducing mechnical properties. When solid volume ratio of aggregate is 70.6%, using quantity of resin is minimized to 10wt.%.

• Journal of Environmental Science International
• /
• v.23 no.8
• /
• pp.1395-1407
• /
• 2014

Coal seam gas (CSG) production involves extracting methane from coal seams with ground water which is so called a primary by-product of this process, and is often rich in salts and other constituents. The predicted large volume and variable quality of this water make water management a topic associated with CSG production. In the past, the amount of this water used to be pumped into the vacant aquifer, or into the river during the life of individual production wells. Australian government make a strategies for management and beneficial use of the water. From this point of view, a detailed assessment has not been undertaken, it is necessary for water resource production to analysis the "Coal Seam Gas Water (CSG Water) Management Policy Study" published in Queensland, Australia.

• Nuclear Engineering and Technology
• /
• v.47 no.4
• /
• pp.424-433
• /
• 2015

The operating characteristics of hydrogen iodide (HI) decomposition for hydrogen production were investigated using the commercial computational fluid dynamics code, and various factors, such as hydrogen production, heat of reaction, and temperature distribution, were studied to compare device performance with that expected for device development. Hydrogen production increased with an increase of the surface-to-volume (STV) ratio. With an increase of hydrogen production, the reaction heat increased. The internal pressure and velocity of the HI decomposer were estimated through pressure drop and reducing velocity from the preheating zone. The mass of $H_2O$ was independent of the STV ratio, whereas that of HI decreased with increasing STV ratio.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.1
• /
• pp.103-114
• /
• 2001

In Korean clothing industry, most of the womens wear is manufactured by subcontractors. Because womens fashion is getting more rapidly changing, subcontractors production run of each orders is getting shorter too. Also the volume of each order is quite small compare to mens or childrens. So subcontractors are always in a hurry to adjust their production capacity to new order. Therefore they cannot afford to plan production line and allocate works efficiently enough to manufacture competitive products in terms of cost, lead time, as well as quality. The purpose of this study is to suggest a production planning model for womens apparel manufacture, which are relevant to the situation of Korean clothing industry.