• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.2
• /
• pp.155-161
• /
• 2015

Technetium-99m (^99mTc) is an important, short-lived decay product of molybdenum-99 (⁹⁹Mo), and it is considered the backbone of the modern nuclear diagnostic procedures. Since fission of ²³⁵U is the main source of production of ⁹⁹Mo, either highly-enriched uranium (HEU) targets or low-enriched uranium (LEU) targets are irradiated in the research reactors. The use of LEU targets is being promoted by the international community to avoid the proliferation issues linked with the use of HEU. In order to define the waste management strategy at the planning stage of establishment of an LEU based ⁹⁹Mo production facility, the impact of the use of LEU targets on the radioactive waste stream of the ⁹⁹Mo production facility was analyzed. Because the volume of uranium waste is estimated to increase six times, the use of high uranium density targets and the utilization of hot isostatic pressing were recommended to reduce the increased waste volume from the use of LEU based targets.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.3
• /
• pp.95-100
• /
• 2020

Machines and facilities are physically or chemically degenerated by continuous usage. One of the results of this degeneration is the process mean shift. The representative type of the degeneration is wear of tool or machine. According to the increasing wear level, non-conforming products cost and quality loss cost are increasing simultaneously. Therefore a periodic preventive resetting the process is necessary. The total cost consists of three items: adjustment cost (or replacement cost), non-conforming cost due to product out of upper or lower limit specification, and quality loss cost due to difference from the process target value and the product characteristic value among the conforming products. In this case, the problem of determining the adjustment period or wear limit that minimizes the total cost is called the 'process mean shift' problem. It is assumed that both specifications are set and the wear level can be observed directly. In this study, we propose a new model integrating the quality loss cost, process variance, and production volume, which has been conducted in different fields in previous studies. In particular, for the change in production volume according to the increasing in wear level, we propose a generalized production quantity function g(w). This function can be applied to most processes and we fitted the g(w) to the model. The objective equation of this model is the total cost per unit wear, and the determining variables are the wear limit and initial process setting position that minimize the objective equation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.3
• /
• pp.194-204
• /
• 2021

The research was analyzed the catch data of the five years (2016-2020) for six joint venture company tuna purse seiners in the Atlantic Ocean, with the aim of suggesting improvement measures for responsible and sustainable fishing according to changes of recommendation by International Commission for the Conservation of Atlantic Tuna (ICCAT) on the tropical tunas. In the last five years, the average catch of six tuna purse seiner gradually increased to 7,745 tons, 8,364 tons and 9,053 tons from 2016 to 2018, but decreased to 7,761 tons in 2019 and 6,214 tons in 2020. The reason for the decrease in fishing volume in 2019 and 2020 was the fluctuation of the formation of the cold water zone (22-23℃), and the total ICCAT convention area of FAD closure in January and February due to the expansion of the FAD closure area and poor free school catching during two months period, respectively. The analysis on fishing area showed that the percentage of fishing in the high sea was about 85% although the FAD closure area included the EEZ zone in coastal countries; the rise of the fishing license in coastal countries is also believed to be a factor. In order to overcome such situations and improve catching volume, it will be possible if excellent manpower is secured, school fishing is expanded, and the production of high value-added catch (purse seine special: PS).

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.1
• /
• pp.45-50
• /
• 2021

Machines and facilities are physically or chemically degenerated by continuous usage. The representative type of the degeneration is the wearing of tools, which results in the process mean shift. According to the increasing wear level, non-conforming products cost and quality loss cost are increasing simultaneously. Therefore, a preventive maintenance is necessary at some point. The problem of determining the maintenance period (or wear limit) which minimizes the total cost is called the 'process mean shift problem'. The total cost includes three items: maintenance cost (or adjustment cost), non-conforming cost due to the non-conforming products, and quality loss cost due to the difference between the process target value and the product characteristic value among the conforming products. In this study, we set the production volume as a decreasing function rather than a constant. Also we treat the process variance as a function to the increasing wear rather than a constant. To the quality loss function, we adopted the Cpm+, which is the left and right asymmetric process capability index based on the process target value. These can more reflect the production site. In this study, we presented a more extensive maintenance model compared to previous studies, by integrating the items mentioned above. The objective equation of this model is the total cost per unit wear. The determining variables are the wear limit and the initial process setting position that minimize the objective equation.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.12
• /
• pp.1311-1320
• /
• 2005

The purpose of this research is to survey characteristics of microbial community and the removal efficiency of organic materials for biological activated carbon in water treatment plant. Coal based activated carbon retained more attached bacterial biomass on the surface of the activated carbon than the other activated carbon with operating time and materials. The heterotrophic plate count(HPC), eubacteria(EUB) and 4,6-diamidino-2-phenylindole(DAPI) counts were ranged from $0.95{\times}10^7$ to $52.4{\times}10^7$ CFU/g, from $3.8{\times}10^8$ to $134.2{\times}10^8$ cells/g and from $7.0{\times}10^8$ to $250.2{\times}10^8$ cells/g, respectively. The biomass of EUB and DAPI appeared to be much more $10^2$ than HPC, which were increasing in bed volume of 20,000 at the stage of steady-state. The change of microbial community by analyzing fluorescent in situ hybridization(FISH) method with rRNA-targeted oligonucleotide probes, the dominant group was $\alpha$-proteobacteria($\alpha$ group) and high G+C content bacteria(HGC) the lowest distributing rate before reaching the bed volume of 20,000. After reaching the bed volume of 20,000, $\alpha$ group and other groups of bacteria became decreased, on the other hand, the proportion of both $\beta$-proteobacteria($\beta$ group) and $\gamma$-proteobacteri($\gamma$ group) were increasing. Coconut and wood based activated carbons had similar trend with coal based activated carbon, but the rate of $\alpha$ group on coal based activated carbon had gradually increased. Bacterial production with the operating period appeared highest in coal based activated carbon at the range of $1.2{\sim}3.4\;mg-C/m^3{\cdot}h$ while the coconut and wood based activated carbon were ranged from 1.1 to 2.6 $mg-C/m^3{\cdot}h$ and from 0.7 to 3.5 $mg-C/m^3{\cdot}h$ respectively. The removal efficiency of assimilable organic carbon(AOC) showed to be highly correlated with bacterial production. The correlation coefficient between removal efficiency of AOC and bacterial production were 0.679 at wood based activated carbon, 0.291 at coconut based activated carbon and 0.762 at coal based activated carbon, respectively.

• Korean Journal of Veterinary Research
• /
• v.42 no.3
• /
• pp.299-308
• /
• 2002

The purpose of this morphometric study was to obtain detailed quantitative information on all cell types in the testis interstitium of Korean ring-necked pheasants combined with data on changes in the steroidogenic function of the testis during the breeding and nonbreeding seasons. Animals collected during the breeding season, testis weights, sperm production, serum testosterone levels, leuteinizing hormone-stimulated testosterone secretion, and the length of the seminiferous tubules were significantly (p < 0.05) increased as compared to the nonbreeding season. Seminiferous tubules occupied 93.25% of testis volume in the breeding season. Leydig cells constituted 0.82% of the testicular volume. The mean volume of an Leydig cell was $1039{\mu}m^3$, and each testis contained about 24.53 million Leydig cells. Testes of the pheasants during the nonbreeding season displayed a 98% reduction in testis volume that was associated with a decrease in the absolute volume of seminiferous tubules (98% reduction), tubular lumen(100%), interstitium(90%), blood vessels(84%), lymphatic spaces(97%), Leydig cells(79%), mesenchymal cells(51%), and myoid cells(61%). The number of Leydig cells, mesenchymal cells, myoid cells per testis in the breeding season was higher (p < 0.05) than in the nonbreeding season. Although the average volume of a Leydig cell was 74% lower in the nonbreeding season, the average volume of a myoid and mesenchymal cell remained unchanged. These results demonstrate that there are a striking differences in the testicular structure of the Korean ring-necked pheasant in the breeding and nonbreeding seasons. Every structural parameter of the Leydig cell was pasitively correlated with both serum and LH-stimulated secretion concentrations of testosterone. Correlation of changes in hormonal status with morphometric alterations of all Leydig cell suggests that the Korean-ring necked pheasant may be used as a model to study structure-function relations in the avian testis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.6
• /
• pp.374-379
• /
• 2007

Two experiments were designed to examine short-term effects of human chorionic gonadotropin (hCG), and long-term effects of gonadotropin-releasing hormone agonist (GnRHa), $17{\alpha}-hydroxyprogesterone$ (17P), and $17{\alpha},20{\beta}-dihydroxy-4-pregnen-3-one\;(17,20{\beta}P)$, alone or in combination, on milt production of the starry flounder Platichthys stellatus. In the first experiment, fish were injected with either 200 IU hCG/kg body weight or the same volume of marine fish Ringer's solution (MFRS). In the second experiment, each fish was implanted with a blank cholesterol pellet (control), $200\;{\mu}g$ GnRHa, $500\;{\mu}g$ 17P, or $100\;{\mu}g\;17,20{\beta}P/kg$ body weight alone or in combination. In the first experiment, hCG injection resulted in an increase in the expressible milt volume and a decrease in the spermatocrit (Sct). After pellet implantation in the second experiment, the milt volume was increased in males treated with GnRHa, GnRHa+17P, or $GnRHa+17,20{\beta}P$. On day 7 after hormone pellet implantation, the milt volume began to increase, and on day 14, the milt volume in the $GnRHa+500\;{\mu}g$ 17P group was significantly higher than that in the control group. Compared with the control group, the hormone pellet-treated groups had a significant reduction in the mean Sct and sperm concentration (Sc) at day 7 after pellet implantation, while there were no differences in total sperm number. The results suggest that increases in milt volume are generally associated with decreases in Sct and SC, suggesting that the main mechanism for the increase in milt volume was milt hydration.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.12a
• /
• pp.285-285
• /
• 2003

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.12a
• /
• pp.365-365
• /
• 2003

• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.2
• /
• pp.103-111
• /
• 1998

A nondestructive ultrasonic technique is presented for estimating the reinforcement volume fractions of particulate composites. The proposed technique employs a theoretical model which accounts for composite microstructures, together with a measurement of ultrasonic velocity to determine the reinforcement volume fractions. The approach is used for a wide range of SiC particulate reinforced Al matrix ($SiC_p/Al$) composites. The method is considered to be reliable in determining the reinforcement volume fractions. The technique could be adopted in a production unit for the quality assessment of the metal matrix particulate composite extrusions.