• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.6
• /
• pp.787-794
• /
• 2005

The aim of this study was 1) to confirm the practical efficiency of a routine milk P4 monitoring system for postpartum reproductive management of a dairy herd, and 2) to evaluate the relationship between the blood metabolic profiles, milk quality and body weight of individual cows in the farm records, which may reflect the postpartum nutritional condition, and the time of postpartum resumption of ovarian activity of dairy cows. A total of 116 Holstein cows was used in the present study. First, during the period of Experiment 1, postpartum reproductive management based on weekly measured milk P4 concentration from individual cows was conducted. Compared with the reproductive records of the past two years without P4 monitoring, although the day from calving to first AI did not change, both the number of AI until pregnant (with P4; 1.9 times vs. without P4; 2.9 times) and the days open (with P4; 95.1 days vs. without P4; 135.8 days and 133.8 days) were significantly decreased. In Experiment 2, the measurement of blood constituents such as albumin, blood urea nitrogen, packed cell volume, ammonia, glucose, total cholesterol, non-esterified, AST and $\gamma$-GTP was performed on the blood samples taken once approximately 14 days postpartum, to monitor both health and nutritional conditions. The milk constituent parameters, such as milk protein (MP), milk fat (MF), SNF and lactose, collected from the monthly progeny test of individual cows, were used to monitor the postpartum nutritional status. Furthermore, the data obtained from the routine measurements of body weight were used to calculate the rate of peripartum body weight loss. The resumption day of the postpartum estrous cycle was assumed from the milk P4 profiles of individual cows. There was no clear relationship between each parameter from blood examination and those from resumption time. However, the cows had low values of MP, and SNF, which significantly affected the resumption of the postpartum estrous cycle. Similarly, a higher rate of body weight loss indicated a significant delay (more than 1 month) in the resumption of the postpartum estrous cycle, compared with the groups that had a medium or lower rate of body weight loss. The results of the present study demonstrated that the implementation of routine milk P4 monitoring-based postpartum reproductive management, together with milk quality parameters and routine BW data available in field conditions may be utilized as a practical approach for increasing the postpartum reproductive efficiency of a high yielding dairy herd.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.3
• /
• pp.36-46
• /
• 2011

At present, the number of local governments using the Traffic Information Center are increasing and drivers are utilizing its traffic information from VMS installed on roads in cities. However, the cases of the user's utility of VMS about urban roads with special characteristics different from expressways and urban highways haven't been evaluated so far. Because VMS is a medium installed from a budget to provide traffic information, it is necessary to evaluate and manage the efficiency of users. This study judged that the efficiency of the drivers using VMS of urban roads most influences the duty on alternative route information provision so that it established its evaluation criteria. In addition, it needs to raise its value by many drivers' observation of VMS. Therefore, in case of the same conditions, the installation location of VMS should be a road section with much traffic volume so its the evaluation criteria was established. At present, the study results can be utilized to raise the user's utility of VMS installed in the urban roads.

• Food Science and Preservation
• /
• v.13 no.2
• /
• pp.216-222
• /
• 2006

Microwave energy (2450 MHz) was applied to extract health-effective component (HEC) from grape seed. Three different solvents approved for grape seed extract such as water, ethanol and acetone, were confirmed in their microwave-heating properties and by which extraction efficiencies were determined. Microwave-assisted extraction (MAE) was performed under different parameters; microwave power : (0, 50, 100 and 150), time : (1, 3, 5, 7, and 9 min), the sample to solvent ratio : (1:20, 1:10, 1:5 and 1:2.5), and particle size(whole, 20, 40 and 60 mesh) and the subsequent extracts were used for determining their physicochemical properties, such as total yield : (TY), total phenolics : (TP), catechin content : (CC), electron donating ability : (EDA), and browning color. The heating properties of solvent demonstrated the optimal ranges of microwave and time as 100 W and 2 to 6 min. The TY and HFC content were higher with increasing powers in water and ethanol solvent, while HFC content were lower in acetone at over 100 W. The longer of extraction time up to 5 min, the higher extraction efficiency. Based upon the overall MAE efficiency and solvent recovery, it was found optimal to use 10 times volume of ethanol for 10 mesh of seed particle at 100 W.

• Membrane and Water Treatment
• /
• v.11 no.1
• /
• pp.79-85
• /
• 2020

A single-stage deammonification with a sequencing batch reactor (SBR) that simultaneous nitritation, anaerobic ammonia oxidation (anammox), and denitrification (SNAD) occur in one reactor has been widely applied for sidestream of wastewater treatment plant. For the stable and well-balanced SNAD, a feeding strategy of influent wastewater is one of the most important operating factors in the single-stage deammonification SBR. In this study, single-stage deammonification SBR (working volume 30L) was operated to treat a high-strength ammonium wastewater (1200 mg NH₄⁺-N/L) with different feeding strategies (single feeding and nine-step feeding) under the condition without COD. Each cycle of the step feeding involved 6 sub-cycles consisted of aerobic and anoxic periods for partial nitritation (PN) and anammox, respectively. Contrary to unstable performance in the single feeding, the step feeding showed better deammonification performance (0.565 kg-N/m³/day). Under the condition with COD, however, the nitrogen removal rate (NRR) decreased to 0.403 kg-N/m³/day when the Nine-step feeding strategies had an additional denitrification period before sub-cycles for PN and anammox. The NRR was recovered to 0.518 kg-N/m³/day by introducing an enhanced multiple-step feeding strategy. The strategy had 50 cycles consisted of feed, denitrification, PN, and anammox, instead of repeated sub-cycles for PN and anammox. The multiple-step feeding strategy without sub-cycle showed the most stable and excellent deammonification performance: high nitrogen removal efficiency (98.6%), COD removal rate (0.131 kg-COD/m³/day), and COD removal efficiency (78.8%). This seemed to be caused by that the elimination of the sub-cycles might reduce COD oxidation during aerobic condition but increase the COD utilization for denitrification period. In addition, among various sensor values, the ORP pattern appeared to be applicable to monitor and control each reaction step for deammonification in the multiple-step feeding strategy without sub-cycle. Further study to optimize the number of multiple-step feeding is still needed but these results show that the multiple-step feeding strategy can contribute to a well-balanced SNAD for deammonification when treating high-strength ammonium wastewater with COD in the single-stage deammonification SBR.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.1
• /
• pp.111-119
• /
• 2015

A growth trial was conducted to determine the optimal incorporation level of dietary magnesium hydrogen phosphate (MHP, $MgHPO_4$), which was manufactured from swine manure and phosphorus (P), required by juvenile far eastern catfish (Silurus asotus). Graded MHP of 0.5%, 1.0%, 1.5%, and 2.0%, and 2.0% monocalcium phosphate (MCP) each was added to the basal diet (control) in lieu of cellulose to become the range of available P (AP) from 0.4% to 0.8% of which diets were designated as control, MHP0.5, MHP1.0, MHP1.5, MHP2.0, and MCP, respectively. Control diet contained fish meal (20%), soybean meal (40%), wheat flour (27%), corn gluten meal (5%), fish oil (2%) and soy oil (2%) as main ingredients. Following a 24 h fasting, 540 fish with a mean body weight of 11.8 g were randomly allotted to 6 groups in triplicate, whereby 18 tanks ($0.4{\times}0.6{\times}0.36cm$, water volume of 66 L) were prepared. The feeding experiment lasted for 8 weeks. Fish group fed the control diet showed the lowest weight gain (WG) and feed efficiency (FE) among treatments. The WG was, however, not significantly different (p>0.05) from that of fish group fed MHP0.5. Fish group fed MHP2.0 showed the highest WG and FE of which values were not significantly different from those of fish groups fed diets MHP1.0 and MHP1.5 as well as MCP (p>0.05) except fish groups fed control and MHP0.5. Aspartate aminotransferase was significantly decreased with an increase in available P, while alanine aminotransferase did not show a significant difference among treatment. The highest inorganic P in plasma was observed in fish fed MHP2.0. From the present results, a second-order regression analysis revealed that the optimal dietary MHP level and the AP requirement were found to be 1.62% and 0.7%, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.87-98
• /
• 1990

The present Study dealt with the earthquake-resistant design of cantilever retaining walls supporting cohesionless soils. With design examples of three different types of cantilever retaining walls, the factors of safety against sliding were computed at various values of horizontal acceleration coefficient and compared with each other. The horizontal inertia effect due to the weights of concrete wall itself and a portion of backfill was taken into account in the analyses, and also Mononobe-Okabe pseudo-static solution method was modified to deal with various states different from limiting equilibrium state. From the analyses of safety against sliding, it was found that a cantilever retaining wall with sloped base was the most efficient type in earthquake resistant design. It was also found that by sloping the base, the width of the base slab could be reduced, resulting in the least volume of concrete, excavation and backfill as compared to the other types of walls. In the case of a cantilever retaining wall with sloped feel, the efficiency similar to that of a wall with sloped base could be expected under static loading as well as at relatively low level of earthquake loading. However, this efficiency became vanished with the increase of horizontal acceleration coefficient, since the rate of reduction in developed earth pressures on the heel became smaller. In addition, the design charts with different soil friction angles as well as with different earthquake resistant design criteria of safety factor against sliding were presented for the design of cantilever retaining walls sith sloped base.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.6
• /
• pp.896-902
• /
• 2015

Milking center wastewater (MCW) has a relatively low ratio of carbon to nitrogen (C/N ratio), which should be separately managed from livestock manure due to the negative impacts of manure nutrients and harmful effects on down-stream in the livestock manure process with respect to the microbial growth. Simultaneous nitrification and denitrification (SND) is linked to inhibition of the second nitrification and reduces around 40% of the carbonaceous energy available for denitrification. Thus, this study was conducted to find the optimal operational conditions for the treatment of MCW using an attached-growth biofilm reactor; i.e., nitrogen loading rate (NLR) of 0.14, 0.28, 0.43, and $0.58kg\;m^{-3}\;d^{-1}$ and aeration rate of 0.06, 0.12, and $0.24\;m^3\;h^{-1}$ were evaluated and the comparison of air-diffuser position between one-third and bottom of the reactor was conducted. Four sand packed-bed reactors with the effective volume of 2.5 L were prepared and initially an air-diffuser was placed at one third from the bottom of the reactor. After the adaptation period of 2 weeks, SND was observed at all four reactors and the optimal NLR of $0.45kg\;m^{-3}\;d^{-1}$ was found as a threshold value to obtain higher nitrogen removal efficiency. Dissolved oxygen (DO) as one of key operational conditions was measured during the experiment and the reactor with an aeration rate of $0.12\;m^3\;h^{-1}$ showed the best performance of $NH_4-N$ removal and the higher total nitrogen removal efficiency through SND with appropriate DO level of ${\sim}0.5\;mg\;DO\;L^{-1}$. The air-diffuser position at one third from the bottom of the reactor resulted in better nitrogen removal than at the bottom position. Consequently, nitrogen in MCW with a low C/N ratio of 2.15 was successfully removed without the addition of external carbon sources.

• Land and Housing Review
• /
• v.8 no.4
• /
• pp.249-256
• /
• 2017

Urbanization can be remarkable affected flood, pollutant loading, ecological system, and green infrastructure by distortion of hydrologic cycle. In order to mitigate these problems in urban, Low Impact Development(LID) technique has been introduced and applied in the world. SWMM model was calibrated with sets of field monitoring data and applied for calculation of runoff and pollutant loading in Asan-tangjung LID city under 2016 rainfall. Runoff reduction of watershed and catchment basins were showed efficiency 12.2% and 62.0%, respectively. Reduction of COD and TP loading also high efficiency in catchment basins were evaluated 74.9 and 71.4%. The results of this study can be used effectively in decision making processes of urban development project by comparing watershed runoff and pollutant reduction by designs of sort of LID technique, LID volume and location.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.287-297
• /
• 2019

Responding to the rapid delivery demands and variety of small-volume products through human resource-dependent logistics operations in online markets is difficult. Logistics robots in fulfillment centers are expected to increase due to difficulties in hiring workers and rising labor costs. Amazon operates more than 100,000 robots in its Fulfillment centers. Alibaba, DHL, and UPS are also introducing robot technology to improve the logistics efficiency. Logistics robots are being used actively in the fierce online market competition of the global distribution industry. On the other hand, Korea is relatively sluggish. To revitalize the introduction of logistics robots in Korea, it is necessary to examine the factors that influence acceptance. The description of acceptability was based on an expanded technology acceptance model that has been verified through various studies. Studies have shown that both the ease and usefulness of purchasing have significant effects, and that ease has the greatest effect. The more experience involved, the more innovative, the more positive. The usefulness was shown to be positive as the perceived risks are low, price efficiency is good, and social impact is greater. This study provides theoretical and practical implications for logistics robot development and marketing.

• Ecology and Resilient Infrastructure
• /
• v.3 no.2
• /
• pp.100-109
• /
• 2016

Low impact development (LID) facilities are established for the purpose of restoring the natural hydrologic cycle as well as the removal of pollutants from stormwater runoff. Improved efficiency of LID facilities can be obtained through the optimized interaction of their major components (i.e., plant, soil, filter media, microorganisms, etc.). Therefore, this study was performed to evaluate the performances of LID facilities in terms of runoff and pollutant reduction and also to provide an optimal maintenance method. The monitoring was conducted on four LID technologies (e.g., bioretention, small wetlands, rain garden and tree box filter). The optimal SA/CA (facility surface area / catchment area) ratio for runoff reduction greater than 40% is determined to be 1 - 5%. Since runoff reduction affects the pollutant removal efficiency in LID facilities, SA/CA ratio is derived as an important factor in designing LID facilities. The LID facilities that are found to be effective in reducing stormwater runoff are in the following order: rain garden > tree box filter > bioretention> small wetland. Meanwhile, in terms of removal of particulate matter (TSS), the effectiveness of the facilities are in the following order: rain garden > tree box filter > small wetland > bioretention; rain gardens > tree box filter > bioretention > small wetland were determined for the removal of organic matter (COD, TOC), nutrients (TN, TP) and heavy metals (Cu, Pb, Cd, Zn). These results can be used as an important material for the design of LID facilities in runoff volume and pollutant reduction.