• 제목/요약/키워드: Voltage Rising

검색결과 237건 처리시간 0.045초

Cymbal Type 트랜스듀서를 이용한 압전 발전 장치 (Piezoelectric Generator Using Cymbal Type Transducer)

  • 전호익;정성수;박태곤
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.169-170
    • /
    • 2008
  • On this paper, piezoelectric generators using piezoelectric ceramics were designed and fabricated. Generators were made by attaching cymbal type metal plates on upper and bottom sides of a disc type piezoelectric ceramic. Generator converts wasting mechanical energy to electrical energy. Output voltage was increased when thickness of ceramic and displacement of vibration were increased. Temperature of the ceramic was increased when it generates, but the temperature rising was saturated at certain temperature.

  • PDF

The Control of an Electrostrictive Polymer Actuator by Using Neural Network

  • Youn, Ji-Won;Jeon, Jae-Wook;Nam, Jae-Do;Park, Hyoukryeol;Kim, Hunmo
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2002년도 ICCAS
    • /
    • pp.120.4-120
    • /
    • 2002
  • $\textbullet$ In order to operate EP actuator, high voltage is applied to that. $\textbullet$ Our previous control algorithm for an EP actuator was PI method with constant gain. $\textbullet$ But this Control method is limitation such as rising time, steady-state error, and settling time. $\textbullet$ A neural network algorithm is proposed for improvement of performance. $\textbullet$ To do this, neural network algorithm changes the gain of PI control. $\textbullet$ In order to efficient drive EP actuator, the gain is changed at some point. $\textbullet$ Neural network method improve the performance of operation.

  • PDF

철도차량 견인전동기의 가속열화수명평가 기술현황 (A technology State of Accelerating Degradation and Life Estimation on the Traction Motor for Railway Rolling Stock)

  • 왕종배;김기준;최영찬
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 제2회 학술대회 논문집 일렉트렛트 및 응용기술전문연구회
    • /
    • pp.25-28
    • /
    • 2000
  • In this paper, the technology for accelerating degradation & life estimation on the traction motor was introduced with the stator form-winding sample coils of the 200 Class insulation system The accelerative degradation was performed in 10 cycles, which were composed of thermal stress, fast rising surge voltage, vibration, water immersion and overvoltage applying. After aging of 10 cycles, condition diagnosis test such as insulation resistance & polarization index, capacitance & dielectric loss and partial discharge properties were investigated in the temperature range of $20{\sim}160^{\circ}C$. Relationship between degradation conditions and diagnosis results were analyzed to find an dominative degradation factor at the end-life point

  • PDF

마아카-에폭시 복합재료 계면에서의 왜도 특성 (The Skewness Properties at Interface in Mica-Epoxy Composite)

  • 임장섭;이은학;구할본;김태성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1992년도 추계학술대회 논문집
    • /
    • pp.128-131
    • /
    • 1992
  • In this paper, the skewness properties of partial discharge at interface layer in mica-epoxy composite material were investigated and studied on interface specimens which has internal electrodes. As a result, it has been confirmed that the interface exists as abnormal resin layer and the contact condition at the interface is depended upon the density of si lane aqueous solution. The Pulse frequency of discharge at abnormal interface has been shown a linear increasing with enlargement of discharge quantity according to rising of the applied voltage. Whereas, in case of normal interface, pulse frequency represented exponential increasing at the saturating point of discharge quantity. The aging model can be represented from the variable characteristics of skewness.

  • PDF

ATM 게이트 모듈의 응답속도 개선 (Reduction of the Response Time of an ATM Gate Module)

  • 서준호;최연선
    • 한국소음진동공학회논문집
    • /
    • 제16권4호
    • /
    • pp.380-386
    • /
    • 2006
  • ATM is a machine that receives and pays money. The gate module of ATM separates forgeries from bills and changes the transfer direction of bills. In this paper, the dynamic behavior of the gate was analyzed numerically and experimentally. The moment of inertia of the gate lever, the driving force of the solenoid and the spring force were measured, respectively. And the displacements of the plunger, the Input voltage and current were measured experimentally. The measured dynamic behaviors were simulated numerically using Maxwell program which can accommodate the electromagnetic problem of the solenoid. Through the analysis, the design factors were found to make a fast and reliable new ATM gate module.

3상 4선식 배선의 중성선에 탈락시 부하 전압 상승 방지를 위한 중성선 보상기에 관한 연구 (A study on the neutral line compensator for prevention of rising at load voltage instantly when disconnect the neutral line in 3phase 4 line system)

  • 김현우;백동현
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 2011년도 추계학술논문발표회 논문집
    • /
    • pp.522-525
    • /
    • 2011
  • 3상 4선식 배선 라인에서 중성선이 탈락할 경우 부하측의 중선선에 연결된 일부의 부하측 전압은 급상승하게 되고 이로 인한 피해가 많으므로 본 연구에서는 배전라인의 점검시 또는 접촉 불량에 의하여 발생할 수 있는 중성선의 탈락을 순간 감지하고 이를 보상하여 별도로 중성선을 생성하여 새로운 중성선을 순간 제공함으로서 중성선 탈락에 의한 피해를 최대한 억제하고자 하는 것이다. 이로 인하여 부하측의 전압상승에 의한 전기적 재해를 사전에 미리 예방이 가능한 효과도 있게 된다.

  • PDF

RTDS를 이용한 전계통 정전시 호남지역 시송전선로 검토 (RTDS Simulation for the System Blackstart of the Honan Area)

  • 봉우영;김기동;이명래;이남호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
    • /
    • pp.223-225
    • /
    • 2001
  • When a wide area blackout occurres, reenergizing transmission lines should be done at first. The KEPCO(Korea Electric Power Corporation) divides whole power system grid Into seven subsystem. This paper describes the investigation of facts, such as voltage rising and system stability, which occur in case that the blackstart plant of the Honam area will be displaced from Juam H/P to Seojingang H/P.

  • PDF

원판형 압전 세라믹을 이용한 압전 발전 장치의 설계 및 제작 (Design and Fabrication of Piezoelectric Generator Using Piezoelectric Ceramics)

  • 전호익;정성수;박태곤
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
    • /
    • pp.315-316
    • /
    • 2008
  • On this paper, piezoelectric generators using piezoelectric ceramics were designed and fabricated. Generators were made by attaching cymbal type metal plates on upper and bottom sides of a disc type piezoelectric ceramic. Generator converts wasting mechanical energy to electrical energy. Output voltage was increased when thickness of ceramic and displacement of vibration were increased. Temperature of the ceramic was increased when it generates, but the temperature rising was saturated at certain temperature.

  • PDF

컴퓨터 시뮬레이션에 의한 일렉트렛트 센서의 최적 전계 해석과 응용 (A Study of Optimum Electromagnetic Field Analysis and Application of the Electret Sensor Using Computer Simulation)

  • 정동회;김상걸;김성렬;김용주;김영천;이준웅
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1998년도 춘계학술대회 논문집
    • /
    • pp.435-438
    • /
    • 1998
  • In this paper, Electret is formed to range voltage -5[kV] to -8[kV] by corona charging in PTFE film and sensor is manufactured by method of moments in sensing infra sonic. Charges of charged film are calculated also TSC measurement and induced potential of sensing electrode according to the charges is become aware of computer simulation. Electret Infra Sonic Transducer, which is designed and manufactured according to the potential and electric field simulation in using method of moments, is proved as it is effectively. Because sensitivity that measured under 10[Hz] is that average value of sensitivity rising rate is 6.34 [dB/oct] as average value is $\pm$1 [dB/oct] range -5[kV] to -8[kV] in corona charging film. As a result, it is believed that characteristic of acquired transducer can be application of medical treatment, industry, and animal life researches and the study of noise elimination, what's more, is required.

  • PDF

소형트랜스의 Cascading 방식을 적용한 임펄스 출력특성 (The Impulse Output Characteristics using Cascading Method of Compact Transformer)

  • 정종한;김휘영;홍정환;박구렬;김희제;조정수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 C
    • /
    • pp.1865-1867
    • /
    • 2000
  • The pulse power system has been widely used to many applications. such as E/P(Electrostatic Precipitator), DeNOx/DeSOx power system, ozon generator. etc. A pulse energy efficiency for load depend on the rising time, peak value, pulse duration, impedance matching. etc. The pulse generator generally required for short pulse duration, high peak value was forced to consider its size and economy. In this study, developing a compact pulse generator that applied for Cascading method to be made of two pulse transformer, we compared cascading voltage with no cascading one by applying the pulse energy to load.

  • PDF