• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1102-1103
• /
• 2007

This Paper presents a solution to control the Brushless DC Motor(BLDCM) in Digital Lightening Processor(DLP) using the Linear Quadratic Regulator(LQR). Generally, The speed of BLDCM in DLP is controlled by the lead angle control or the input voltage control using PAM(Pulse Amplitude Modulation) etc. These control methods have speed overshoot in speed control and need the long time until BLDCM reaches at the steady state. In order to improve the performance, this paper present the PI speed controller using the LQR based on vector control and the rotor position detection methods at the space vector PWM inverter. The proposed methods are proved by the experimental results

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.34-35
• /
• 2000

A Y-branch phase modulator made of an electro-optic(EO) polymer has been designed and fabricated. An EO polymer, PMMA-DR1, is used for the core layer, and UV-curable polymers, UV-15 and UV-15 LV, for the cladding layers. The rib type polymeric waveguides are fabricated by the reactive ion etching method and their EO effects are obtained by the poling process. The optical properties of the fabricated phase modulator are as follows: the halfwave voltage, $V_{\pi}$, is 25 V, the insertion loss of TM mode is 13.8 dB, and the intensity modulation is 0.17 % (V).

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1634-1641
• /
• 2018

This study focuses on a high-performance direct active and reactive power controller design that is successfully applicable to three-phase pulse width modulation (PWM) AC/DC converters used in renewable distributed energy generation systems. The proposed controller can overcome the sluggish transient dynamic response of conventional controllers to rapid power command changes. Desired active and reactive powers can be thoroughly obtained at the end of each PWM period through a deadbeat solution. The proposed controller achieves an exact nonlinear cross-coupling decoupling of system power without using a predefined switching table or bang/bang hysteresis control. A graphical and analytical analysis that naturally leads to a control voltage vector selection is provided to confirm the finding. The proposed control strategy is evaluated on a 3 kW PWM AC/DC converter in the simulation and experiment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.339-340
• /
• 2010

본 논문에서는 Z-네트워크 커패시터 전압 제어를 위한 변조지수 적분제어를 이용하여 3상 Z-소스 인버터(ZSI)의 출력 교류전압을 일정하게 제어하는 방법을 제안하였다. ZSI의 직류전압 및 부하가 변동되는 상황에서도 제안된 방법을 사용하여 일정한 출력 교류전압을 유지하는 것이 가능하다. 제안된 방법의 타당성을 입증하기 위해 ZSI의 직류전압이 200[V]에서 150[V]로 급감 하는 경우와 부하가 $60[{\Omega}]$에서 $20[{\Omega}]$으로 급감하는 경우를 PSIM 시뮬레이션을 이용해 검증하였다.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1182-1192
• /
• 2019

In order to improve the conversion efficiency and mitigate the EMI problem of conventional hard-switching inverters, a new soft-switching DC-AC inverter with a compact structure and a low modulation complexity is proposed in this paper. In the proposed structure, resonant inductors are connected in series for the arm branches, and resonant capacitors are connected in parallel for the neutral point branches. With the help of resonant components, the proposed structure achieves zero-current switching on the arm branches and zero-voltage switching on the neutral point branches. When compared with state-of-art soft-switching topologies, the proposed topology does not need auxiliary switches. Moreover, the commutation algorithm to realize soft-switching can be easily implemented. In this paper, the principle of the resonant operation of the proposed soft-switching converter is presented and its performance is verified through simulation studies. The feasibility of the proposed inverter is evaluated experimentally with a 2.4-kW prototype.

• 전력전자학회논문지
• /
• 제24권4호
• /
• pp.303-309
• /
• 2019

A hybrid control of a rectifier/regulator of wireless power transfer systems for electric vehicles is studied. A combined rectifier/regulator is used for charging control. The hybrid control comprises integral cycle control and pulse width modulation control to cope with the variations in the induced voltage due to clearance and alignment. The hybrid control has good control capability and does not cause severe switching loss. A 22 kW prototype of the Wireless Power Transfer class 4 charging system defined by the Society of Automotive Engineers is constructed and tested to verify the proposal.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.153-155
• /
• 2019

This paper proposes a two-phase interleaved bridgeless single-stage ac-dc converter with magnetic integration that can achieve CCM power factor correction without input current sensing. All switches achieve ZVS turn-on and all diodes achieve ZCS turn-on for the whole grid cycle. SDAB-based modulation strategy is applied which results in simple power control and wide range output voltage. A flux cancellation method to integrate the interleaved transformer is firstly proposed in this paper to reduce the core size and loss. Experimental results on a 1.7-kW, 50kHz prototype are given to verify the principle and advantages of the proposed ac-dc converter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 추계학술대회
• /
• pp.30-32
• /
• 2018

본 논문에서는 고압 직류송전용 MMC에 오프셋 전압 제어를 적용하는 데 있어 3고조파 주입기법과 제안하는 가변오프셋 전압 제어 기법에 따른 시스템의 고조파 특성과 순환전류 특성에 대해 비교 분석한 내용을 기술하고 있다. 제안한 가변오프셋 전압 제어는 MI(Modulation Index)에 따라 오프셋 전압의 크기를 가변 하여 MMC 출력 상전압이 항상 N+1 레벨을 형성하는 기법이다. 제안하는 기법과 3고조파 주입기법의 비교를 위해 200MW MMC HVDC 시스템에 적용하여 PSCAD/EMTDC 시뮬레이션을 수행하였다. 제안한 기법은 오프셋 전압제어 적용에 따라 발생할 수 있는 고조파 특성에 있어 3고조파 주입기법에 비해 우수함을 확인하였다. 또한 제안하는 기법을 사용할 경우 오프셋 전압에 의한 4고조파 순환전류 저감이 가능함을 알 수 있었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 추계학술대회
• /
• pp.215-216
• /
• 2018

본 논문에서는 Carrier-Based Pulse Width Modulation(CBPWM)을 사용한 Active Neutral Point Clamped (ANPC) 인버터의 안정적인 고장 허용 운전을 위한 중성점 전압 균형 제어 기법을 제안한다. 제안된 기법은 ANPC 인버터를 구성하고 있는 전력 반도체 스위치의 고장으로 인한 고장 허용 운전 시, 출력 특성이 저하되는 문제점을 해결하기 위해 스위칭 조합의 재구성과 기준 출력전압의 변조를 통한 중성점 전압 균형을 유지한다. 제안된 기법의 타당성은 RT-BOX를 통한 HIL 시뮬레이터를 이용하여 확인하였다.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.18-21
• /
• 2020

Undetected wafer slip during the lift pin-down motion in semiconductor equipment may affect the center to edge variation, wafer warpage, and pattern misalignment in plasma equipment. Direct measuring of the amount of wafer slip inside the plasma process chamber is not feasible because of the hardware space limitation inside the plasma chamber. In this paper, we demonstrated a practice for the wafer lift pin-up and down motions with respect to the gear ratio, operating voltage, and pulse width modulation to maintain accurate wafer position using remote control linear servo motor with an experimentally designed chamber mockup. We noticed that the pin moving velocity and gear ratio are the most influencing parameters to be control, and the step-wised position control algorithm showed the most suitable for the reduction of wafer slip.