• 한국전자파학회논문지
• /
• 제22권11호
• /
• pp.1047-1053
• /
• 2011

본 논문에서는 근거리에서 효율 향상을 위해 적응 주파수 제어 회로를 갖는 HF-대역 무선 전력 전송 시스템을 제안하였다. 일반적으로 무선 전력 전송 시스템은 공진기 간의 이격 거리가 가까워짐에 따라 결합 계수가 변하게 되며, 이는 반사 임피던스에 의한 임피던스 부정합을 발생시킨다. 본 연구에서 제안한 방식은 전압제어 발진기의 공진 주파수를 이격 거리에 따라 자동으로 가변함으로써 공진기 간의 거리가 가까워 임피던스 부정합이 큰 경우에도 전송 효율의 저하를 막을 수 있다. 적응 주파수 제어 회로는 방향성 결합기, 검파기 및 루프 필터로 구성된다. 본 논문에서 제안한 방법의 유용성을 입증하기 위하여 HF-대역에서 동작하는 30${\times}$30 $cm^2$ 크기의 루프 안테나를 갖는 무선 전력 전송 시스템을 설계하여 측정한 결과 근거리에서 효율이 개선됨을 확인하였다.

• 한국방사선학회논문지
• /
• 제8권7호
• /
• pp.377-382
• /
• 2014

방사선 임상 관련 분야에서 컴퓨터의 사용으로 인해 카세트 사용에서는 볼 수 없는 아티팩트가 만들어지고 있다. 고스팅 아티팩트는 평판형 박막 트랜지스터(Flat Panel Thin-Film Transistor) 배열 검출기를 사용할 때 발생될 수 있다. 특히 고선량의 방사선을 고대조도의 물질에 노출시킨 영상을 획득한 후, 바로 저선량의 조사가 이루어진 영상이 획득될 때 고스팅 아티팩트가 발생할 수 있다. 본 실험에서 고스팅 아티팩트가 육안 관찰시 3분에서 사라지는 것을 확인할 수 있었으며 정량적 분석으로는 대략 6분에서 없어지는 것을 확인할 수 있었다. 또한 이 아티팩트는 관전류보다는 관전압의 영향을 더 받는다는 사실과 노출에 의한 포획전하의 방출이 아닌 시간에 의해 포획전하가 소멸된다는 사실을 실험을 통해 검증할 수 있었다.

• 한국가스학회지
• /
• 제18권2호
• /
• pp.48-54
• /
• 2014

본 논문에서는 알코올 측정용 센서의 광학적 특성 향상을 위한 고유한 광학적 구조를 제안하였으며, 모의해석을 실시하였다. 광 도파관은 한쪽에 공통초점을 갖는 두 개의 타원형 광 도파관으로 구성되었으며, 각 광 도파관의 서로 다른 초점에 적외선 광원과 적외선 센서를 갖는다. 두 타원형 광 도파관의 각도가 30도에서 90도로 증가시켰을 때, 단위면적당 최대 입사광량은 $2.23{\times}10^6W/m^2$에서 $5.74{\times}10^5W/m^2$로 감소하였다. 그러나 조사 빔의 반지름은 1.86 mm로 최소값을 나타내었고, 전체 입사 에너지는 90도 각도를 갖는 구조와 비교하여 약 10 % 작은 값을 보였다. 모의해석 결과로부터 본 논문에 제안한 구조는 긴 흡수파장을 갖는 광학적 가스센서의 감도향상에 기여할 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.196-196
• /
• 2012

Graphene, two-dimensional one-atom-thick planar sheet of carbon atoms densely packed in a honeycomb crystal lattice, has grabbled appreciable attention due to its extraordinary mechanical, thermal, electrical, and optical properties. Based on the graphene's high carrier mobility, high frequency graphene field effect transistors have been developed. Graphene is useful for photonic components as well as for the applications in electronic devices. Graphene's unique optical properties allowed us to develop ultra wide-bandwidth optical modulator, photo-detector, and broadband polarizer. Graphene can support SPP-like surface wave because it is considered as a two-dimensional metal-like systems. The SPPs are associated with the coupling between collective oscillation of free electrons in the metal and electromagnetic waves. The charged free carriers in the graphene contribute to support the surface waves at the graphene-dielectric interface by coupling to the electromagnetic wave. In addition, graphene can control the surface waves because its charge carrier density is tunable by means of a chemical doping method, varying the Fermi level by applying gate bias voltage, and/or applying magnetic field. As an extended application of graphene in photonics, we investigated the characteristics of the graphene-based plasmonic waveguide for optical signal transmission. The graphene strips embedded in a dielectric are served as a high-frequency optical signal guiding medium. The TM polarization wave is transmitted 6 mm-long graphene waveguide with the averaged extinction ratio of 19 dB at the telecom wavelength of $1.31{\mu}m$. 2.5 Gbps data transmission was successfully accomplished with the graphene waveguide. Based on these experimental results, we concluded that the graphene-based plasmonic waveguide can be exploited further for development of next-generation integrated photonic circuits on a chip.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.220-220
• /
• 2011

The Ne-Xe plasmas in dense plasma-focus device with coaxial electrodes were generated for extreme ultraviolet (EUV) lithography. The influence of gas mixture ratio, Ne-Xe (1, 10, 15, 20, 25, 30, 50%) mixture gas, on EUV emission measurement, EUV intensity and electron temperature in the coaxially focused plasma were investigated. An input voltage of 4.5 kV was applied to the capacitor bank of 1.53mF and the diode chamber was filled with Ne-Xe mixture gas at a prescribed pressure. The inner surface of the cylindrical cathode was lined by an acetal insulator. The anode was made of tin metal. The EUV emission signal of the wavelength in the range of 6~16 nm has been detected by a photo-detector (AXUV-100 Zr/C, IRD). The visible emission line was also detected by the composite-grating spectrometer of the working wavelength range of 200~1100 nm (HR 4000CG). The electron temperature is obtained by the optical emission spectroscopy (OES) and measured by the Boltzmann plot with the assumption of local thermodynamic equilibrium (LTE).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.332-332
• /
• 2011

The extreme ultraviolet (EUV) radiation, whose wavelength is from 120 nm down to 10 nm, and the energy from 10 eV up to 124 eV, is widely utilized such as in photoelectron spectroscopy, solar imaging, especially in lithography and soft x-ray microscopy. In this study, we have investigated the plasma diagnostics as well as the debris characteristics between the two types of dense plasma focusing devices with coaxial electrodes of Mather and hypocycloidal pinch (HCP), respectively. The EUV emission intensity, electron temperature and plasma density have been investigated in these cylindrical focused plasma along with the debris characteristics. An input voltage of 5 kV has been applied to the capacitor bank of 1.53 uF and the diode chamber has been filled with Ar gas at pressure ranged from 1 mTorr and 180 mTorr. The inner surface of the cathode was covered by polyacetal insulator. The central anode electrode has been made of tin. The wavelength of the EUV emission has been measured to be in the range of 6~16 nm by a photo-detector (AXUV-100 Zr/C, IRD). The visible emission has also been measured by the spectrometer with the wavelength range of 200~1,100 nm. The electron temperature and plasma density have been measured by the Boltzmann plot and Stark broadening methods, respectively, under the assumption of local thermodynamic equilibrium (LTE).

• 한국항공우주학회지
• /
• 제33권8호
• /
• pp.65-74
• /
• 2005

공진기 진동형 링레이저 자이로가 외부에서 입력되는 각도변화만을 검출하여 출력하기 위해서는 링레이저 출력으로부터 공진기의 각진동 운동에 의한 출력을 제거하는 방법이 필요하다. 본 논문에서는 공진기 진동형 링레이저 자이로에서 공진기의 각진동을 검출하는 각속도 센서 출력을 V-F 변환하여 링레이저 출력을 보상하는 dither-stripping에 대하여 논의하였다. 우리는 V-F 신호의 offset을 제거하기 위하여 V-F 신호의 미분값을 취하고 또한 미분값을 취함으로서 변화되는 위상을 보상하기 위하여 아날로그 적분기로 위상을 보정하는 방법과 링레이저 신호 또는 V-F 신호의 검출 시점을 지연시키는 방법을 개발하였다. 그리고 링레이저 출력과 V-F 신호 사이의 환산을 위하여 분산을 이용하여 이득을 산출하는 방법을 개발하였다. 우리는 이와 같은 방법을 적용하고, dither trapping 방법과 비교하는 실험을 통하여 효과를 분석하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.416-419
• /
• 2002

There are being two prominent studying for Digital Radiography. Direct and Indirect method of Digital Radiography are announced for producing high quality digital image. The one is using amorphous selenium as photoconductor and the other is using phosphor layer as a light conversion. But each two systems have strength and weakness such as high voltage and blurring effect. In this study, we investigated the electrical characteristic of $multi-layer\left(CaWO_{4}+a-Se \right)$ as a photoconductor according to the changing arsenic composition ratio. This is a basic research for developing of Hybrid digital radiography which is a new type X-ray detector. The arsenic composition ratio of a-Se compound is classified into 7 different kinds which have 0.1%, 0.3%, 0.5%, 1%, 1.5%, 5%, 10% and were made test sample throught thermo-evaporation. The phosphor layer of $CaWO_4$ was overlapped on a-Se using EFIRON optical adhesives. We measured the dark and photo current about the test sample and compared the electrical characteristic of the net charge and signal-to-noise ratio. Among other things, test sample of compound material of 0.3% arsenic showed good characteristic of $2.45nA/cm^2$ dark current and $357.19pC/cm^2/mR$ net charge at $3V/{\mu}m$.

• Restorative Dentistry and Endodontics
• /
• 제26권2호
• /
• pp.134-140
• /
• 2001

The polymerization shrinkage of composite resins is an important drawback although the composites have many advantages-more esthetic and conservative than metallic restoratives etc. The purposes of this research were to develop a new measurement method and to manufacture an instrument that can measure the initial dynamic volumetric shrinkage of composite resins during polymerization. The instrument was basically an electromagnetic balance that constructed with a force transducer using position sensitive photo detector(PSPD) and a negative feedback servo amplifier of proportional-derivative(PD) controller. The volumetric change of composites during polymerization was detected continuously as buoyancy change in distilled water by means of Archimedes's principle. It was converted to continuous electrical voltage signal in real time. The signal was properly conditioned and filtered and then it was stored in computer by a data acquisition(DAQ) board. By using this electronic instrument. the dynamic patterns of the polymerization shrinkage of eight commercial(Z-100, DenFil, AeliteFil, Z-250, P-60, SureFil, Synergy compact, and Tetric ceram) composite resins were measured and compared. The results were as follows. 1. From this project of developing instrument, the ability has been achieved that can acquire and process data of electrical signal transformed from various physical phenomenon by using temperature, displacement. photo. and force transducer. As a consequence, the instrumentation and measurement system used to analyze the physical characteristics of various dental materials in dental research field can be designed, manufactured and implemented in lab. 2. This instrument has some advantages. It was insensible to temperature change and could measure true dynamic volumetric shrinkage in real time without complicated process. It showed accuracy and high precision results with small standard deviation. 3. The polymerization shrinkage of composites was significantly different between brands and ranged from 2.47％ to 3.89％, The order of polymerization shrinkage was as follows, in order of increasing shrinkage, SureFil, P60, Z250, Z100, Synergy compact. DenFil, Tetric ceram, and AeliteFil. 4. The polymerization shrinkage rate per unit time, dVol％/dt, showed that the instrument can provide an indirect research method for polymerization reaction kinetics.

• 한국동물위생학회지
• /
• 제25권1호
• /
• pp.23-29
• /
• 2002

A method was developed to separate, detect and qualify aldicarb, bendiocarb, carbaryl, carbofuran, ethiofencarb, methomyl, methiocarb, propoxur in meats and fruits. Experimental beef and fork samples were fortified with 0.05mg/kg of carbamate pesticides for analysis. Carbamate-detected pear by HPLC fluorescence detector(HPLC/FLS) are extracted with acetonitril and refined by solid phase extraction(SPE) filled with aminopropyl-bonded silca, In the following step, the injected materials into LC/MS are analyzed to result in the fact that bendiocarb, carbaryl, carbofuran, ethiofencarb, methomyl, methiocarb, propoxur presents several sorts of fraction ions following with; [M+H]$^{+}$, [M+Na]$^{+}$,［M-CONH$CH_3$]$^{+}$, [M-OCONH$CH_3$]$^{+}$. In addition, ethiofencarb presents [M-SCH$_2$$CH_3$]$^{+}$ ion distinctive and aldicarb presents [M+Na]$^{+}$ and [M-OCONH$CH_3$]$^{+}$ ion which is the most decisive fraction ion for pesticides such as bendiocarb, carbaryl, carbofuran, ethiofencarb, methiocarb, methomyl, propoxur excluding [M+H]$^{+}$ ion. However, [M-OCONH$CH_3$]$^{+}$ and [M-OCONH$CH_3$]$^{+}$ fraction ion charactering carbamate pesticides are detected most efficiently with fragment voltage 50ev. As a result, for rluantitative analysis, [M+Na]$^{+}$ ion is the most decisive ion for detection of aldicarb and [M+H]$^{+}$ ion is the most decisive fraction ion for Pesticides such as bendiocarb, carbaryl, carbofuran, ethiofencarb, methiocarb, methomyl, propoxur. Carbaryl-detected pear by HPLC/FLS are analyzed by L/MS and the result shows that [M+H]$^{+}$ and [M-CONH$CH_3$]$^{+}$ ions charactering carbaryl are detected.ering carbaryl are detected.