• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.3
• /
• pp.420-422
• /
• 2004

This study was to demonstrate a rapid novel method for detection of adulterated cow milk in goat milk using modified staining protocol after native polyacrylamide gel electrophoresis (PAGE). Samples of cow milk and goat milk containing 0, 0.5, 1.0 and 2.0% (v/v) of cow milk were analyzed. Low levels of cow milk mixed in goat milk were identified by the presence of higher mobility of $\beta$-lactoglobulin A ($\beta$-Lg A) in cow milk. By mini-gel electrophoresis, a distinguishable protein profile was visualized in 25 min using the modified Coomassie blue staining solution, in which methanol (50%) was replaced with ethanol (20%) and the concentrations of Coomassie blue and acetic acid were reduced from 2 to 0.13% and 10 to 5%, respectively. To visualize the milk proteins, gels in the staining solution were water-bathed in boiling water for 5 min and then cooled down immediately for 3-5 min. The sensitivity of this method is relatively high, allowing examination of 1% cow milk in goat milk. The procedure presented here is also very cost-effective due to less reagents needed. This simplified method would be useful and applicable to dairy industry for routine examination of goat milk.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3098-3103
• /
• 2007

In this paper, natural convection of a magnetic fluids(W-40) in a half circular pipe enclosure are investigated by numerical and experimental method. One side wall is kept at a constant temperature(25$^{\circ}C$), and the opposite side wall is also kept at a constant temperature(20$^{\circ}C$). Under above conditions, various magnitudes of the magnetic fields were applied up. Theoretical study through the governing equation derived by Siliomis is carried out with numerical analysis by the GSMAC Method. And the thermo-sensitive liquid crystal film(R20C5A) is utilized in order to visualize wall-temperature distributions as an experimental method. This study has resulted in the following fact that the natural convection of a magnetic fluids are controlled by the direction and intensity of the magnetic fields.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.142-147
• /
• 2001

Natural convection of a magnetic fluid is different from that of Newtonian fluids because magnetic body force exists in an addition to gravity and buoyancy. In this paper, natural convection of a magnetic fluids(W-40) in a cubic cavity is examined by numerical and experimental method. One side wall was kept at a constant temperature($25^{\circ}C$), and the opposite side wall was also held at a constant but lower temperature($20^{\circ}C$). Under above conditions, various magnitudes of the magnetic fields were applied up. GSMAC scheme is used for a numerical method, and the thermo-sensitive liquid crystal film(R20C5A) is utilized in order to visualize wall-temperature distributions as an experimental method. This study has resulted in the following fact that the natural convection of a magnetic fluids is controlled by the direction and intensity of the magnetic fields.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.365-369
• /
• 2000

Methanogenic activity of granular sludge was monitored by specific methanogenic activity (SMA) assay and confocal laser scanning microscopy (CLSM) during start-up of a thermophilic UASB reactor. Autofluorescence by CLSM could visualize the methanogenic bacterial population inside sludge granules and its intensity was proportional to SMA. Considering the complex procedures of SMA measurement, fluorescence quantification by CLSM can be suggested as a routine technique measuring methanogenic activity in UASB granules.

• Journal of Korea Multimedia Society
• /
• v.18 no.10
• /
• pp.1241-1250
• /
• 2015

In this paper, we describe visualization pursuant of developing 37 Honored Ones within the Diamond World Mandala. “The 37 Honored Ones” are a collective term for 5 Buddhas and 32 Bodhisattvas that were built on the basis of Vajrasekhara Sutra. Also, as core values of Buddhism, they represent ideas of Esoteric Buddhism systematically and symbolically. “The 37 Honored Ones” are completed by the development of 4 Buddhas from Vairocana and their interaction with 16 Great Bodhisattvas and 16 Offering Bodhisattvas that were also developed from Vairocana. So, in this paper, we analyze and visualize the development of “37 Honored Ones.” This line of research is significant because it aims to convert narrative structure of the conventional Buddhism scriptures into various types of digital contents. Also, applications of the implemented visual digital contents can be as follows; educational service for Buddhist doctrines, development of the various Buddhist cultural contents, etc.

• KIEAE Journal
• /
• v.10 no.4
• /
• pp.3-8
• /
• 2010

Recently, various daylight evaluation methods for visual environment have been developed; simulation analysis methods, numerical calculation, and data monitoring methods. However, it is impossible for simulation analysis to make real scenes and visualize real images exactly. Also, a numerical calculation is considered as an out of date and time-consuming mean. Therefore, for acquisition of accurate results, many studies often use the monitoring data methods. Especially, most studies regarding discomfort glare are evaluated by measuring the physical quantity of luminance through traditional measuring Minolta Luminance meters as an instrument. But, this method has a difficulty in measuring several points at the same time because of the limitation of spaces and time when mapping. So, this study focused on the potential usefulness of High Dynamic Range photography technique as a luminance mapping tool. In order to evaluate the accuracy of proposed programs such as webHDR, Photomatix and PHOTOLUX, this paper has conducted an experiment by using Canon EOS 5D and NICON Coolpix8400 digital camera.

• Journal of Korea Foundry Society
• /
• v.18 no.3
• /
• pp.262-270
• /
• 1998

Gravity tilt pour casting can effectively guarantee the reduction of various casting defects by controlling the rotation speed and the tilting angle of the mold during tilt pouring. The relationship between casting process parameters and the soundness of castings has been investigated in order to determine the optimum process variables in the gravity tilt pour casting process. In order to evaluate the effect of rotation speed on mold filling patterns, a video camera was employed to visualize the in-situ fluid flow behavior of the molten metal, and the relevant fluid velocity was also estimated. X-ray and mechanical tests were also performed to evaluate the effect of fluid velocity on casting quality. With the rotation speed lower than 0.5 r.p.m., which is nearly corresponding to the critical velocity of stability in the fluid flow, sound castings were obtained without having any casting defects. It can be concluded that the gravity tilt pour casting process is an effective process for manufacturing sound casting products with enhanced physical and mechanical properties.

• Journal of Power System Engineering
• /
• v.10 no.2
• /
• pp.16-21
• /
• 2006

On this study, numerical analysis was performed for the 3 dimensional flow field of gas and particle phase for axial inlet cyclone, a part of dust collector. We applied FVM to visualize the gas phase. The flow was solved using ${\kappa}-{\varepsilon}$ turbulence model. The major parameters considered in this study were helical guide vane, inner diameter, length. Particle trajectory calculations were performed for the particle sizes of $5{\mu}m{\sim}75{\mu}m$. The distribution curve of particle sizes was made of Rosin-Rammler function. The simulation results show various gas flows, particle trajectories on numerical models.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.4
• /
• pp.327-335
• /
• 2000

The spent fuel rod extracting machine is automatically operated in high radioactive environment, so high reliability of operation is required. In this paper, to enhance the reliability of this machine by providing a close monitoring capability. a real time graphic simulation method is suggested. This method utilizes conventional IGRIP (Interactive Graphics Robot Instruction Program) 3D graphic simulation tool to visualize and simulate the 3D graphic model of this machine. Also, the dedicated protocol is defined for transmission of the operational data of the machine. The real time graphic simulation is realized by developing the socket module between a graphic workstation and a machine control computer through the TCP/IP network and by dividing the 3D graphic simulation GSL(Graphic Simulation Language) program as a small sized sub routine. The suggested method is implemented while automatically operating the rod extracting machine. The result of implementation shows that the real time 3D graphic simulation is well synchronized with the actual machine according to the operational data.

• Water Engineering Research
• /
• v.1 no.3
• /
• pp.243-256
• /
• 2000

This physically-based hydrologic model is developed to calculate the soil-moisture balance on paddy fields. This model consists of three modules; the first is the unsaturated module, the second is the rice evapotranspiration module with SPAC(soil-plant-atmospheric-continuum), and the third is the groundwater and open channel flows based upon the interrehtionship module. The model simulates the hydrlogical processes of infiltration, soil water storage, deep perocolation or echarge to the shallow water table, transpiration and evaporation from the soil surface and also the interrelationship of the groundwater and river flow exchange. To verify the applicability of the developed model, it was applied to the Kimjae Plains, located in the center of the Dongjin river basin in Korea, during the most serious drought season of 1994. The result shows that the estimated water net requirement was 757mm and the water deficit was about 5.9% in this area in 1994. This model can easily evaluate the irrigated water quantity and visualize the common crop demands and soil moisture conditions.