• 제목/요약/키워드: Visual scanning

검색결과 156건 처리시간 0.025초

통신해양기상위성 통신 중계기용 MMIC의 우주인증 (Space Qualification of MMICs for COMS Communications Transponder)

  • 장동필;염인복;오승엽
    • 한국위성정보통신학회논문지
    • /
    • 제1권2호
    • /
    • pp.56-62
    • /
    • 2006
  • 본 논문에서는 통신해양기상위성 Ka대역 위성통신중계기에 사용하기 위해 개발한 MMIC의 인증 시험에 대해 다루었다. 통신해양기상위성의 통신중계기에 사용될 Ka대역 능동부품은 총 12종의 MMIC를 이용하여 개발되었다. 12종의 MMIC중에는 저잡음 증폭기, 중전력 증폭기, 주파수 혼합기, 주파수 체배기, RF 스위치, 그리고 감쇄기 기능을 갖는 MMIC들이 포함되어 있다. MMIC의 제조 공정은 우주 인증된 시설인 미국 NGST사의 0.15um GaAs pHEMT공정을 이용하였으며, 지난 수십년간 많은 우주 산업 관련 부품 생산 경험을 가지고 있다. 제작된 모든 MMIC에 대하여 Visual Inspection을 수행하였으며, Wafer Lot Acceptance 판정을 위하여 SEM(Scanning Electron Microscope) Inspection을 수행하였다. MMIC의 동작 수명을 보증하기 위해 Test Fixture를 제작하여 $125^{\circ}C$의 온도에서240시간 동안의 Burn-in 시험과 1000시간 동안의 가속 수명 시험이 수행되었다. MMIC 부품의 성능 저하 또는 수명 단축의 가장 큰 요인인 pHEMT의 채널온도 상승을 확인하기 위하여 적외선 온도 측정 시험과 유한요소법을 이용한 pHEMT의 채널 온도 해석을 수행하였다.

  • PDF

2차원 참조 기법을 이용한 3D 컬러 집적 영상의 압축 (Compression of 3D color integral images using 2D referencing technique)

  • 김종호;유훈
    • 한국정보통신학회논문지
    • /
    • 제13권12호
    • /
    • pp.2693-2700
    • /
    • 2009
  • 본 논문에서는 렌즈 배열에 의한 대용량의 3차원 집적 영상을 활용하기 위한 효율적인 압축 방법을 제안한다. 기존의 정지영상 압축 기법은 각 요소 영상간의 상관도를 적절하게 제거하지 못하여 압축 효율 및 화질 측면에서 낮은 성능을 보인다. 또한, 각 요소 영상을 1차원 스캔방법에 의해 분리하여 동영상 압축기법을 이용할 경우 요소 영상간 상관도를 효과적으로 제거하는 데 한계가 있다. 제안하는 방식에서는 2차원 참조기법에 의해 각 요소 영상을 분리하고, 이를 H.264/AVC의 다중 프레임 참조 기법을 이용하여 효과적으로 압축한다. 제안하는 2차원 참조 기법은 요소 영상의 수직, 수평 및 대각 방향의 상관도에 따라 최적의 참조 영상을 선택할 수 있어 가장 좋은 압축성능을 나타낸다. 실험 결과는 정지 영상 압축 방법에 비해 요소 영상을 분리하는 방법이 압축 성능을 향상시킴을 보이고, 제안하는 2차원 참조 기법이 1차원 스캔 방식에 비해 주관적 화질 및 객관적 성능에 있어 뛰어남을 보인다.

웹사이트 디자인의 시각적 요소와 유용성이 성과에 미치는 영향에 관한 연구 (A Study on the Effects of Visual Aesthetics and Usability of Web Site Design on their Performance)

  • 김승경;이재관
    • 한국경영과학회지
    • /
    • 제32권2호
    • /
    • pp.17-40
    • /
    • 2007
  • Most research on web site design has focused on technological factors, while visual aesthetic factors have been considered less important. In contrast, this study focuses on visual aesthetic factors in web site design. Findings of this study can be summarized as follows : (1) The result of SPSS-factor analysis shows that there are 3 distinct factors, 'classical aesthetics', 'expressive aesthetics', and 'usability' 'Classical aesthetics' and 'expressive aesthetics' can be described by visual aesthetic design, 'Visual aesthetic design' can be distinguished from 'usability'. This conceptual confusion relating to 'usability' and 'visual aesthetic design' can be clarified by these findings. (2) As a result of multiple regression analyses, 'classical aesthetics', 'expressive aesthetics', and 'usability' have a positive influence on 'interactivity' and 'web site evaluation'. This research clarifies the concepts of 'expectations' of Grier [18] and 'engagement' of Rosen and Purinton [33] as the 'interactivity' between users and web sites. Furthermore, this research suggests a valid model with high $R^2$(interactivity, 48% : web site evaluation, 68%). (3) Empirical tests show that the differences among users in 'entry point' are related to the characteristics of web sites and the personal characteristics of users. The differences among users in terms of 'scanning time' are closely related to the attitudes and evaluation tendencies of users with respect to web sites. These findings could contribute to the 'search phase' of the Faraday model [16], enabling it to be more precise and extensible. The managerial implication of this study is that customers' preferences regarding web site designs are differences, as their preferences are based on their individual characteristics. Therefore, marketing managers should consider promotional tools on web sites that are relevant to the target market. An optimal strategy for web design could be a carefully-selected combination of factors that are relevant to the 'interactivity' and 'evaluation' of web sites. Additionally, if marketing managers want to attract more favorable attitudes and more affirmative evaluations from users, web sites should be designed so that they are understood more quickly by users. finally, this study suggests that 'good design' for web sites depends on understanding how to attain the appropriate balance between 'classical aesthetics' and 'expressive aesthetics', based on the target customer.

수동형 FTIR 원격화학 탐지기를 이용한 SF6 오염운의 실시간 탐지 (Passive Remote Chemical Detection of SF6 Clouds in the Atmosphere by FTIR)

  • 정유진;박병황;김주현
    • 한국군사과학기술학회지
    • /
    • 제17권1호
    • /
    • pp.8-14
    • /
    • 2014
  • Brightness temperature spectra acquired from FTIR(Fourier Transform Infrared)-SCADS (Standoff Chemical Agent Detection System) could be available for detection and identification of the chemical agents and pollutants from different background. IR spectrum range of 770 to 1350 $cm^{-1}$ is corresponding to "atmospheric window". A 2-dimensional(2D) brightness temperature spectrum was drawn from combining each data point through automatic continuous scanning of FTIR along with altitude and azimuth. At higher altitude, temperature of background was decreased but scattering effect of atmospheric gases was increased. Increase in temperature difference between background and blackbody in SCADS at higher temperature causes to increases in peak intensity of $SF_6$. This approach shows us a possibility that 2D visual information is acquired from scanning data with a single FTIR-SCADS.

Premature Failure Analysis of Servovalve Components for a Thermal Power Plant

  • Chang, Sung-Yong;Chang, Joong-Chel;Kim, Bum-Soo;Seo, Min-Woo;Choi, Chel-Jong
    • 대한금속재료학회지
    • /
    • 제49권9호
    • /
    • pp.708-714
    • /
    • 2011
  • The premature failure of a servovalve used for six months in a thermal power plant has been analyzed. The servovalve was made of stainless steel, containing 16Cr-0.44Mo, along with other elements. An overload of oil-supply pumping and an abnormal increase in the oil flux were observed during operation. A study revealed that erosion and corrosion could be the main causes of the failure. The visual examination of the servovalve did not show any appreciable damage. However, corrosion and erosion of the servovalve were observed using scanning electron microscopy (SEM). Upon examination of the servovalve, the corrosion was found to have occurred throughout the bushing and spool; however, erosion occurred at only the edge-side. In addition, the condition of the electrohydraulic control system (EHC) oil was investigated with respect to its satisfaction of the management standard.

Noise2Atom: unsupervised denoising for scanning transmission electron microscopy images

  • Feng Wang;Trond R. Henninen;Debora Keller;Rolf Erni
    • Applied Microscopy
    • /
    • 제50권
    • /
    • pp.23.1-23.9
    • /
    • 2020
  • We propose an effective deep learning model to denoise scanning transmission electron microscopy (STEM) image series, named Noise2Atom, to map images from a source domain 𝓢 to a target domain 𝓒, where 𝓢 is for our noisy experimental dataset, and 𝓒 is for the desired clear atomic images. Noise2Atom uses two external networks to apply additional constraints from the domain knowledge. This model requires no signal prior, no noise model estimation, and no paired training images. The only assumption is that the inputs are acquired with identical experimental configurations. To evaluate the restoration performance of our model, as it is impossible to obtain ground truth for our experimental dataset, we propose consecutive structural similarity (CSS) for image quality assessment, based on the fact that the structures remain much the same as the previous frame(s) within small scan intervals. We demonstrate the superiority of our model by providing evaluation in terms of CSS and visual quality on different experimental datasets.

FAST irradiations and initial post irradiation examinations - Part I

  • G. Beausoleil;L. Capriotti;B. Curnutt;R. Fielding;S. Hayes;D. Wachs
    • Nuclear Engineering and Technology
    • /
    • 제54권11호
    • /
    • pp.4084-4094
    • /
    • 2022
  • The Advanced Fuels Campaign Fission Accelerated Steady-state Test (FAST) at Idaho National Laboratory (INL) completed its first irradiation cycle within the Advanced Test Reactor (ATR). The test focused on the irradiation of alloy fuel forms for use in sodium fast reactors. The first cycle of FAST testing was completed and four rodlets were removed for the initial post irradiation examination (PIE). The rodlet design and irradiation conditions were evaluated using Monte Carlo N-Particle (MCNP) for as-run power history and COMSOL for temperature analysis. These rodlets include a set of low burnups (~2.5 % fissions per initial metal atoms [%FIMA]), control rodlets, and a helium-bonded annular rodlet (4.7 %FIMA). Nondestructive PIE has been completed and includes visual inspection, neutron radiography and gamma scanning of the FAST capsules and rodlets. Radiography confirmed the integrity of the experiments, revealed that the annulus in the annular fuel was filled at a modest burnup (4.7 %FIMA), and indicated potential slumping of the cooler rodlets at lower burnup. Precision gamma scanning indicated mostly usual fission product behavior, except for cesium in the He-bonded annular fuel. Future destructive PIE will be necessary to fully interpret the effects of accelerated irradiation on U-Zr metallic fuel behavior.

지시운동 수행동안 안구와 손의 시공간적 협응에 관한 연구 (Study on Spatio-Temporal Eye-Hand Coordination in Targeting Tasks)

  • 은혜인;유미;이아름;김동욱;권대규;김남균
    • 대한의용생체공학회:의공학회지
    • /
    • 제28권3호
    • /
    • pp.417-422
    • /
    • 2007
  • In this study, we investigated spatio-temporal eye-hand coordination by the "Global effect paradigm", a target-distracter configuration Global effect is observed a variety of visual tasks, for example, during rapid automatic tracking, scanning for target detail, and the comparison of target configurations. Global effect used to investigate eye-hand coordination with a task that presents a target close to a distracter. Eight young subjects participated in the experiments. The experiments consist of using a distracter less eccentric than the targe1 and using a distracter more eccentric than target. Each experiment consist of tasks which are making reference, pointing the target with watching visual stimulation(saccade) and pointing the target. The subject's task was to move towards the target as quickly as possible. We measured the eye movement by using EOG and the hand movement by using NDI Optotrak system. This study shows that eye and hand movement exists for global effect paradigm in spatio-temporal coordination.

윈도우즈 기반 영상 감시 시스템에서의 Tearing 현상 개선 (A Study on the Improvement of Tearing Artifact for Windows-Based Visual Monitoring Systems)

  • 정연권;이동학;정선태
    • 한국통신학회논문지
    • /
    • 제27권11C호
    • /
    • pp.1097-1105
    • /
    • 2002
  • 아날로그 모니터를 사용하는 디스플레이 시스템의 경우, 프레임 버퍼의 영상 정보 갱신 주기와 모니터 주사 주기가 맞지 않는 경우, 장면 변화가 심한 동영상 디스플레이시에 화면이 상단과 하단으로 다른 영상이 나타나는 tearing 현상이 발생한다. 다중 카메라 채널을 디스플레이하여야 하는 영상 감시 시스템인 DVR(Digital Video Recorder) 시스템에서는 프레임 버퍼 갱신율이 매우 높기 때문에 tearing 현상이 심하게 된다. 본 논문에서는 윈도우즈 기반 DVR에서 디스플레이 속도 성능의 저하가 별로 없으면서, tearing 현상을 방지한 개선된 디tm플레이 시스템 구조를 제안한다. 제안된 디스플레이 시스템의 효율성은 실험을 통하여 입증하였다.

한국땅거미(Atypus coreanus Kim, 1985)의 시각기 미세구조 (Ultrastructure of the Eye in the Atypus coreanus Kim, 1985)

  • 권중균;고명규;정호삼;김주필
    • Applied Microscopy
    • /
    • 제28권4호
    • /
    • pp.477-490
    • /
    • 1998
  • Most spiders have four pairs of simple eyes. A few families of the spider have their developed eyes to an extent visual cues make up a significant of information to response from the external stimuli. Most spiders respond to the external stimuli around them. Specially, they are very sensitive to vibrations from the air, the ground, their webs, or even the surface of water. The present study was undertaken to examine the evolutionary development and function of eye with the observation of visual ultrastructure of Atypus coreanus Kim, 1985 using the electron microscopy. They have weak mobility, limited territory and low developed eyes. Atypus coreanus was collected from Mt. Ungil, Namyangju-gun, Kyonggi province. The fine structure of these eyes was examined by electron microscopy, and prepard by teasing method for scanning electron microscopic observation. As a result, the eyes of Atypus coreanus was composed of cornea, lens, vitreous body, retina, and rhabdome.

  • PDF